- Foundation
- About 20 min
- 5 practice questions
Chemical reactions of amines
Describe alkylation, acylation and benzoylation of amines, use the carbylamine, nitrous acid and Hinsberg tests to distinguish primary, secondary and tertiary amines, and explain electrophilic substitution in aniline and how acetylation controls it.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write alkylation, acylation and benzoylation reactions of amines.
- Use the carbylamine test, nitrous acid and Hinsberg's reagent to tell 1°, 2° and 3° amines apart.
- Explain why aniline gives 2,4,6-tribromoaniline with bromine water and how acetylation gives monosubstitution.
- Explain the meta product in direct nitration of aniline, sulphanilic acid formation and the failure of Friedel–Crafts reactions.
The lone pair on nitrogen makes amines nucleophiles, and the number of hydrogens on nitrogen decides how far a reaction can go. That is why primary, secondary and tertiary amines give different products with the same reagent, a fact used in several classic laboratory tests.
Alkylation, acylation and benzoylation
- Alkylation: amines react with alkyl halides to give higher amines and finally quaternary ammonium salts (as in ammonolysis).
- Acylation: primary and secondary amines (aliphatic and aromatic) react with acid chlorides, anhydrides or esters by nucleophilic substitution, replacing an N–H hydrogen by an acyl group to give amides: C₂H₅NH₂ + CH₃COCl → C₂H₅NHCOCH₃ + HCl. A base stronger than the amine, such as pyridine, removes HCl and drives the reaction forward. Aniline with acetic anhydride gives acetanilide. Tertiary amines have no N–H and are not acylated.
- Benzoylation: with benzoyl chloride: CH₃NH₂ + C₆H₅COCl → C₆H₅CONHCH₃ (N-methylbenzamide) + HCl.
- With carboxylic acids at room temperature, amines simply form salts.
Tests to distinguish amines
Carbylamine (isocyanide) test. Primary amines, aliphatic or aromatic, heated with chloroform and ethanolic KOH give isocyanides (carbylamines), which have a very foul smell: R–NH₂ + CHCl₃ + 3KOH → R–NC + 3KCl + 3H₂O. Secondary and tertiary amines do not react, so this is a test for primary amines.
Nitrous acid (made in situ from NaNO₂ and a mineral acid).
• Primary aliphatic amines form unstable aliphatic diazonium salts, which decompose at once to give nitrogen gas quantitatively and alcohols: RNH₂ + HNO₂ → ROH + N₂ + H₂O. Measuring the N₂ is used to estimate amino acids and proteins.
• Primary aromatic amines at 273–278 K give diazonium salts (lesson 5).
• Secondary and tertiary amines react in different ways and do not give N₂ like this.
Hinsberg's reagent, benzenesulphonyl chloride, C₆H₅SO₂Cl.
• Primary amine → N-alkylbenzenesulphonamide, C₆H₅SO₂NHR. The N–H hydrogen is made strongly acidic by the electron-withdrawing sulphonyl group, so the product dissolves in alkali.
• Secondary amine → N,N-dialkylbenzenesulphonamide, C₆H₅SO₂NR₂, with no N–H, so it is insoluble in alkali.
• Tertiary amine: no reaction.
This distinguishes, and separates, the three classes; p-toluenesulphonyl chloride is now used instead.
Distinguishing 1°, 2° and 3° amines
-
Primary amine
- Carbylamine test: foul-smelling isocyanide
- Hinsberg: sulphonamide soluble in alkali
- Aliphatic + HNO₂: N₂ gas evolved
-
Secondary amine
- Carbylamine test: negative
- Hinsberg: sulphonamide insoluble in alkali
- No N₂ with HNO₂
-
Tertiary amine
- Carbylamine test: negative
- Hinsberg: no reaction
- No N₂ with HNO₂
Worked example 1: nitrogen from a primary amine
0.59 g of propan-1-amine (59 g mol⁻¹) is treated with excess nitrous acid. How many moles of N₂ are evolved, and what volume would this occupy at 273 K and 1 atm (molar volume 22.4 L)?
n(amine) = 0.59 ÷ 59 = 0.010 mol. RNH₂ + HNO₂ → ROH + N₂ + H₂O, so n(N₂) = 0.010 mol.
Volume = 0.010 × 22.4 = 0.224 L (224 mL). Because the gas is released quantitatively, its volume measures how much primary amine was present.
Electrophilic substitution in aniline
The –NH₂ group is a powerful activator and directs ortho and para, because its lone pair raises the electron density at those positions.
- Bromination: aniline with bromine water at room temperature gives a white precipitate of 2,4,6-tribromoaniline at once. To get a single substitution, the –NH₂ is first protected by acetylation with acetic anhydride. In acetanilide the nitrogen lone pair is partly delocalised onto the carbonyl oxygen, so –NHCOCH₃ activates the ring less than –NH₂. Bromination then gives mainly p-bromoacetanilide, and hydrolysis gives p-bromoaniline.
- Nitration: direct nitration gives tarry oxidation products as well as nitro compounds. In the strongly acidic mixture much of the aniline is protonated to the anilinium ion, which is meta-directing, so a substantial amount of m-nitroaniline forms besides the o- and p-isomers. Protecting the –NH₂ by acetylation first gives p-nitroaniline as the major product after hydrolysis.
- Sulphonation: aniline with concentrated H₂SO₄ forms anilinium hydrogensulphate; heating at 453–473 K gives p-aminobenzenesulphonic acid (sulphanilic acid) as the main product.
- No Friedel–Crafts reaction: aniline forms a salt with the Lewis acid AlCl₃; the nitrogen becomes positively charged and strongly deactivates the ring.
Making p-bromoaniline from aniline
- Aniline Very reactive ring; Br₂ water would give the tribromo product.
- Acetylation with (CH₃CO)₂O Acetanilide: –NHCOCH₃ is a milder activator.
- Br₂ in ethanoic acid Mainly p-bromoacetanilide (the bulky group hinders ortho).
- Hydrolysis (H⁺ or OH⁻) p-Bromoaniline.
Worked example 2: mass of tribromoaniline
9.3 g of aniline (93 g mol⁻¹) reacts with excess bromine water. What mass of 2,4,6-tribromoaniline (C₆H₄Br₃N, 330 g mol⁻¹) forms?
C₆H₅NH₂ + 3Br₂ → C₆H₂Br₃NH₂ + 3HBr. n(aniline) = 9.3 ÷ 93 = 0.10 mol → 0.10 mol product.
Mass = 0.10 × 330 = 33.0 g; bromine used = 0.30 mol.
Key takeaways
- Acylation/benzoylation of 1° and 2° amines gives amides; pyridine removes HCl.
- Carbylamine test (CHCl₃ + alc. KOH) is given only by 1° amines.
- Hinsberg: 1° product dissolves in alkali, 2° does not, 3° does not react; 1° aliphatic amines give N₂ with HNO₂.
- –NH₂ strongly activates (o/p); protect by acetylation for monosubstitution; direct nitration gives some meta product; no Friedel–Crafts.
Check your understanding
-
1. Which amine gives a foul-smelling compound when heated with chloroform and ethanolic KOH?
- N-Methylaniline
- N,N-Dimethylaniline
- Triethylamine
- Ethanamine
Show answer
Answer: D. The carbylamine reaction is given only by primary amines. Ethanamine forms ethyl isocyanide, C₂H₅NC, which smells very unpleasant. The others are secondary or tertiary.
-
2. An amine reacts with benzenesulphonyl chloride to give a product insoluble in aqueous KOH. The amine is:
- Primary
- Secondary
- Tertiary
- Aniline only
Show answer
Answer: B. A secondary amine gives C₆H₅SO₂NR₂, which has no acidic N–H hydrogen and so does not dissolve in alkali. A primary amine's product has an acidic N–H and dissolves; a tertiary amine does not react.
-
3. Why does direct nitration of aniline give a substantial amount of m-nitroaniline?
- –NH₂ is a meta-directing group
- In the strongly acidic mixture aniline is protonated to the anilinium ion, which is meta-directing
- Nitration always gives meta products
- Aniline is oxidised to nitrobenzene first
Show answer
Answer: B. Concentrated acid protonates much of the aniline to C₆H₅NH₃⁺. The –NH₃⁺ group has no lone pair, withdraws electrons and directs meta, so m-nitroaniline forms alongside the o- and p-products.
-
4. Why is aniline acetylated before bromination when p-bromoaniline is wanted?
- To make the ring more reactive
- To make it soluble in water
- To reduce the activating effect of the amino group so that only one bromine enters
- To convert it into a meta director
Show answer
Answer: C. In acetanilide the nitrogen lone pair is partly delocalised onto the C=O, so the ring is activated less strongly. Bromination then stops at monosubstitution, mainly para; hydrolysis afterwards restores –NH₂.
-
5. Assertion (A): Aniline does not undergo Friedel–Crafts alkylation. Reason (R): Aniline forms a salt with AlCl₃, which puts a positive charge on nitrogen and deactivates the ring.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. The basic nitrogen of aniline reacts with the Lewis acid catalyst; the resulting positively charged nitrogen withdraws electrons strongly, so the ring is deactivated and the catalyst is used up. R explains A.
Sign in to keep track of the lessons you finish.