• Foundation
  • About 16 min
  • 5 practice questions

Structure, classification, nomenclature and physical properties of amines

Describe amines as pyramidal derivatives of ammonia, classify them as primary, secondary or tertiary, name them by common and IUPAC rules, and explain their boiling points and solubility through hydrogen bonding.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain the sp³ nitrogen and pyramidal shape of amines.
  • Classify amines as 1°, 2° or 3°, simple or mixed, aliphatic or aromatic.
  • Name amines as alkanamines, N-substituted alkanamines and benzenamines.
  • Explain the order of boiling points of isomeric amines and compare amines with alcohols and alkanes.

Amines are found in proteins, vitamins, alkaloids and hormones, and are made into polymers, dyes and drugs. Adrenaline and ephedrine (secondary amines) raise blood pressure, novocain is a dental anaesthetic, the antihistamine benadryl contains a tertiary amino group, and quaternary ammonium salts are surfactants. Amines are derivatives of ammonia in which one, two or three hydrogen atoms are replaced by alkyl or aryl groups.

Structure

As in ammonia, the nitrogen in amines is trivalent and carries one lone pair. Its orbitals are sp³ hybridised: three overlap with orbitals of H or C, and the fourth holds the lone pair. The shape is therefore pyramidal. The lone pair repels the bond pairs more strongly, so the C–N–E angle (E = C or H) is less than 109.5°; in trimethylamine it is about 108°.

Classification

Classification of amines

  • Primary (1°), RNH₂
    • One H of NH₃ replaced
    • Examples: CH₃NH₂, C₆H₅NH₂
  • Secondary (2°), R₂NH or RNHR′
    • Two H replaced
    • Example: (CH₃)₂NH
  • Tertiary (3°), R₃N
    • All three H replaced
    • Example: (CH₃)₃N
Simple amines have identical groups; mixed amines have different groups.

Nomenclature

Common names: alkyl group + 'amine' as one word (methylamine); di- or tri- for repeated groups (dimethylamine). IUPAC: primary amines are alkanamines, replacing the 'e' of the alkane by 'amine' (CH₃NH₂ is methanamine). For several –NH₂ groups, keep the 'e' and add di-, tri- with locants: H₂N–CH₂–CH₂–NH₂ is ethane-1,2-diamine. Groups on nitrogen in secondary and tertiary amines get the locant N: CH₃NHCH₂CH₃ is N-methylethanamine and (CH₃CH₂)₃N is N,N-diethylethanamine (the largest group gives the parent name). In arylamines the –NH₂ is directly on the ring; C₆H₅NH₂ is aniline, accepted by IUPAC, or benzenamine.

Common and IUPAC names of amines
AmineCommon nameIUPAC name
CH₃CH₂CH₂NH₂n-PropylaminePropan-1-amine
CH₃CH(NH₂)CH₃IsopropylaminePropan-2-amine
CH₃NHC₂H₅EthylmethylamineN-Methylethanamine
(CH₃)₃NTrimethylamineN,N-Dimethylmethanamine
CH₂=CHCH₂NH₂AllylamineProp-2-en-1-amine
H₂N(CH₂)₆NH₂HexamethylenediamineHexane-1,6-diamine
C₆H₅N(CH₃)₂N,N-DimethylanilineN,N-Dimethylbenzenamine

Worked example 1: an amine from its nitrogen content

A saturated aliphatic amine has one nitrogen atom and contains 23.7% nitrogen by mass. Find its molar mass and write its isomers.

Molar mass = 14 ÷ 0.237 = 59 g mol⁻¹. For CₙH₂ₙ₊₃N: 14n + 17 = 59 → n = 3, so C₃H₉N.
Isomers: propan-1-amine (1°), propan-2-amine (1°), N-methylethanamine (2°) and N,N-dimethylmethanamine (3°): four in all.

Physical properties

Lower aliphatic amines are gases with a fishy smell; primary amines with three or more carbons are liquids, and higher ones solids. Aniline and other arylamines are colourless when pure but become coloured on storage because air oxidises them.

Solubility. Lower aliphatic amines dissolve in water because they hydrogen-bond with water; solubility falls as the hydrophobic alkyl part grows, and higher amines are essentially insoluble. Since nitrogen (electronegativity 3.0) is less electronegative than oxygen (3.5), amines form weaker hydrogen bonds than alcohols: butan-1-ol is more water-soluble than butan-1-amine. All amines dissolve in alcohol, ether and benzene.

Boiling points. Primary and secondary amines associate through N–H···N hydrogen bonds. A primary amine has two N–H hydrogens available, a secondary amine one, and a tertiary amine none. So for isomers: primary > secondary > tertiary.

Boiling points of compounds of similar molar mass (standard data)
CompoundMolar mass / g mol⁻¹Boiling point / K
n-C₄H₉NH₂ (1°)73350.8
(C₂H₅)₂NH (2°)73329.3
C₂H₅N(CH₃)₂ (3°)73310.5
C₂H₅CH(CH₃)₂ (alkane)72300.8
n-C₄H₉OH (alcohol)74390.3

Worked example 2: ordering boiling points

Arrange in increasing boiling point: C₂H₅OH, (CH₃)₂NH, C₂H₅NH₂.

All three have molar mass 45–46 g mol⁻¹. Ethanol forms the strongest hydrogen bonds (O is more electronegative than N). Ethanamine (1°) has two N–H, dimethylamine (2°) only one.
Order: (CH₃)₂NH < C₂H₅NH₂ < C₂H₅OH.

Key takeaways

  • Amines: sp³ nitrogen with a lone pair; pyramidal; angle a little under 109.5°.
  • 1° RNH₂, 2° R₂NH, 3° R₃N; IUPAC: alkanamine, N-substituents, benzenamine (aniline).
  • Boiling point of isomers: 1° > 2° > 3°; amines boil lower than alcohols of similar mass.
  • Lower amines are water-soluble through hydrogen bonding, less so than alcohols.

Check your understanding

  1. 1. What is the IUPAC name of CH₃CH₂NHCH₂CH₂CH₃?

    1. N-Ethylpropan-1-amine
    2. Ethylpropylamine
    3. 1-(Ethylamino)propane
    4. N-Propylethanamine
    Show answer

    Answer: A. The larger group, propyl, gives the parent name propan-1-amine, and the ethyl group on nitrogen is shown with the locant N: N-ethylpropan-1-amine. 'Ethylpropylamine' is the common name.

  2. 2. Which is a tertiary amine?

    1. (CH₃)₃CNH₂
    2. C₆H₅NHCH₃
    3. (CH₃CH₂)₂NCH₃
    4. CH₃CH₂CH₂NH₂
    Show answer

    Answer: C. A tertiary amine has no hydrogen on nitrogen. In (CH₃CH₂)₂NCH₃ the nitrogen carries three alkyl groups. (CH₃)₃CNH₂ is primary even though its carbon is tertiary, because the nitrogen carries two H.

  3. 3. Which isomer of C₄H₁₁N has the lowest boiling point?

    1. Butan-1-amine
    2. N-Ethylethanamine
    3. Butan-2-amine
    4. N,N-Dimethylethanamine
    Show answer

    Answer: D. A tertiary amine has no N–H and cannot hydrogen-bond with its own molecules, so N,N-dimethylethanamine (310.5 K) boils lowest. Primary amines boil highest because they have two N–H hydrogens.

  4. 4. Why is butan-1-ol more soluble in water than butan-1-amine?

    1. Butan-1-ol has a higher molar mass
    2. Oxygen is more electronegative than nitrogen, so the O–H group forms stronger hydrogen bonds with water
    3. Butan-1-amine is ionic
    4. Butan-1-amine has no lone pair
    Show answer

    Answer: B. Both can hydrogen-bond with water, but the O–H bond is more polar than N–H (electronegativity 3.5 versus 3.0), so the alcohol's hydrogen bonds with water are stronger and it dissolves better.

  5. 5. Assertion (A): The C–N–C bond angle in trimethylamine is slightly less than 109.5°. Reason (R): The lone pair on nitrogen repels the bonding pairs more strongly than they repel each other.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Lone pair–bond pair repulsion squeezes the bond angles below the tetrahedral value (to about 108°), giving a pyramidal shape. R explains A.

Sign in to keep track of the lessons you finish.

Next lesson → Preparation of amines

Privacy · Terms · Refunds · Delivery