- Foundation
- About 18 min
- 5 practice questions
Preparation of amines
Prepare amines by reduction of nitro compounds, nitriles and amides, by ammonolysis of alkyl halides, by Gabriel phthalimide synthesis and by Hoffmann bromamide degradation, and choose methods that change the length of the carbon chain.
If something looks wrong, please tell us.
By the end of this lesson you can
- Reduce nitro compounds to amines with H₂/catalyst or Fe/HCl and explain why Fe/HCl is preferred.
- Explain ammonolysis and why it gives a mixture of amines.
- Use nitrile and amide reduction, Gabriel synthesis and Hoffmann degradation to make primary amines.
- Use these methods to step up (ascent) or step down (descent) the carbon chain.
Most amines are made from nitro compounds, halides, nitriles or amides. Some methods give a single clean product; others give mixtures. Some keep the number of carbons, some add one and one removes one, which makes them useful in planning syntheses.
1. Reduction of nitro compounds
Nitro compounds are reduced to amines by hydrogen with finely divided Ni, Pd or Pt, or by metals in acid (Sn/HCl, Fe/HCl). Nitroalkanes give alkanamines in the same way. C₆H₅NO₂ + 3H₂ → C₆H₅NH₂ + 2H₂O. Iron scrap with HCl is preferred industrially: the FeCl₂ formed is hydrolysed and releases HCl, so only a small amount of acid is needed to start the reaction.
2. Ammonolysis of alkyl halides
Alkyl or benzyl halides react with ethanolic ammonia (in a sealed tube at about 373 K) by nucleophilic substitution, replacing X by –NH₂: RX + NH₃ → RNH₃⁺X⁻. A strong base frees the amine: RNH₃⁺X⁻ + NaOH → RNH₂ + H₂O + NaX. The disadvantage is that the primary amine is itself a nucleophile and reacts further, giving secondary and tertiary amines and finally a quaternary ammonium salt, R₄N⁺X⁻. A large excess of ammonia makes the primary amine the major product. Reactivity of halides: RI > RBr > RCl.
3. Reduction of nitriles and amides
Nitriles are reduced to primary amines by LiAlH₄ or catalytic hydrogenation: R–C≡N + 4[H] → R–CH₂–NH₂. Because RCN is made from RX and cyanide, this is a way to ascend the series: the amine has one more carbon than the halide. Amides are reduced by LiAlH₄ and then water to amines with the same carbon skeleton: R–CONH₂ → R–CH₂–NH₂.
4. Gabriel phthalimide synthesis
Phthalimide is treated with ethanolic KOH to give potassium phthalimide; heating this with an alkyl halide gives N-alkylphthalimide, and alkaline hydrolysis releases a pure primary amine (no secondary or tertiary amines form). Aromatic primary amines cannot be made this way, because aryl halides do not undergo nucleophilic substitution with the phthalimide anion.
5. Hoffmann bromamide degradation
An amide is treated with bromine and aqueous or ethanolic NaOH. An alkyl or aryl group migrates from the carbonyl carbon to nitrogen, and the product is a primary amine with one carbon fewer than the amide: RCONH₂ + Br₂ + 4NaOH → RNH₂ + Na₂CO₃ + 2NaBr + 2H₂O. This is a way to descend the series.
Changing chain length while making amines
-
Ascent (+1 carbon)
- RX + KCN → RCN
- RCN + LiAlH₄ → RCH₂NH₂
- Example: CH₃CH₂Cl → CH₃CH₂CN → CH₃CH₂CH₂NH₂
-
Same number of carbons
- Reduction of RNO₂ or RCONH₂
- Ammonolysis of RX (excess NH₃)
- Gabriel synthesis from RX
-
Descent (−1 carbon)
- Hoffmann bromamide: RCONH₂ + Br₂ + NaOH → RNH₂
- Example: CH₃CH₂CH₂CONH₂ → CH₃CH₂CH₂NH₂
Worked example 1: planning conversions
Write steps for (a) 1-chlorobutane to pentan-1-amine, (b) propanoic acid to ethanamine, (c) toluene to p-toluidine (4-methylaniline).
(a) One carbon must be added: CH₃(CH₂)₃Cl + KCN → CH₃(CH₂)₃CN; then LiAlH₄ → CH₃(CH₂)₄NH₂.
(b) One carbon must be removed: CH₃CH₂COOH + NH₃ → CH₃CH₂COONH₄, heat → CH₃CH₂CONH₂; then Br₂/NaOH (Hoffmann) → CH₃CH₂NH₂.
(c) Nitration of toluene (conc. HNO₃/conc. H₂SO₄) gives o- and p-nitrotoluene; separate the para isomer; reduce with Fe/HCl → p-CH₃C₆H₄NH₂.
Worked example 2: Hoffmann degradation yield
8.7 g of butanamide (CH₃CH₂CH₂CONH₂, 87 g mol⁻¹) undergoes complete Hoffmann bromamide degradation. Name the amine and find its mass.
The amine has one carbon fewer: propan-1-amine, CH₃CH₂CH₂NH₂ (59 g mol⁻¹).
n(amide) = 8.7 ÷ 87 = 0.10 mol → 0.10 mol amine; mass = 0.10 × 59 = 5.9 g.
Key takeaways
- Nitro → amine with H₂/Ni, Sn/HCl or Fe/HCl (Fe/HCl needs little acid).
- Ammonolysis gives mixtures (1°, 2°, 3°, quaternary); excess NH₃ favours 1°.
- Gabriel gives pure 1° aliphatic amines, not arylamines.
- RCN + LiAlH₄: one carbon more; Hoffmann bromamide: one carbon fewer.
Check your understanding
-
1. Why is Gabriel phthalimide synthesis not used to prepare aniline?
- Aniline is too basic
- Aryl halides do not undergo nucleophilic substitution with the phthalimide anion
- Phthalimide reacts with benzene
- Aniline decomposes in KOH
Show answer
Answer: B. The method needs the phthalimide anion to displace a halide by nucleophilic substitution. Aryl halides such as chlorobenzene resist nucleophilic substitution, so no N-arylphthalimide forms.
-
2. Which amine is obtained from propanamide by Hoffmann bromamide degradation?
- Propan-1-amine
- Butan-1-amine
- Ethanamine
- Propan-2-amine
Show answer
Answer: C. Hoffmann degradation removes the carbonyl carbon: CH₃CH₂CONH₂ → CH₃CH₂NH₂, ethanamine, with one carbon fewer than propanamide.
-
3. Which method converts CH₃Br into CH₃CH₂NH₂?
- KCN, then LiAlH₄
- NH₃, then Br₂/NaOH
- Gabriel synthesis
- Hoffmann degradation
Show answer
Answer: A. An extra carbon is needed. CH₃Br + KCN → CH₃CN, and LiAlH₄ reduces the nitrile to CH₃CH₂NH₂. Gabriel synthesis would give CH₃NH₂, keeping one carbon.
-
4. Why does ammonolysis of an alkyl halide usually give a mixture of products?
- Ammonia is a weak nucleophile
- The halide decomposes
- The primary amine formed is also a nucleophile and reacts with more alkyl halide
- Ammonia reacts with ethanol
Show answer
Answer: C. Once RNH₂ forms, its lone pair can attack another RX, giving R₂NH, then R₃N and finally R₄N⁺X⁻. Using a large excess of ammonia makes collisions of RX with NH₃ much more likely, favouring the primary amine.
-
5. 12.3 g of nitrobenzene (123 g mol⁻¹) is completely reduced to aniline (93 g mol⁻¹). What mass of aniline forms?
- 9.3 g
- 12.3 g
- 18.6 g
- 4.65 g
Show answer
Answer: A. n(C₆H₅NO₂) = 12.3 ÷ 123 = 0.10 mol, giving 0.10 mol of C₆H₅NH₂. Mass = 0.10 × 93 = 9.3 g.
Sign in to keep track of the lessons you finish.