• Foundation
  • About 18 min
  • 5 practice questions

Diazonium salts: preparation, reactions and uses in synthesis

Prepare arenediazonium salts by diazotisation, explain their stability, and use their reactions (Sandmeyer, Gattermann, replacement by I, F, H, OH and NO₂, and azo coupling) to make aromatic compounds that cannot be made by direct substitution.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe diazotisation of aniline at 273–278 K and explain why arenediazonium salts are more stable than alkyl ones.
  • Write reactions replacing –N₂⁺ by Cl, Br, CN (Sandmeyer, Gattermann), I, F, H, OH and NO₂.
  • Describe coupling with phenol and aniline to form azo dyes.
  • Plan multi-step syntheses that use a diazonium salt as the key intermediate.

Fluorobenzene and iodobenzene cannot be made by direct halogenation, and a –CN group cannot be put on benzene by substituting chlorobenzene. Yet all of these are easy to make through a diazonium salt, one of the most versatile intermediates in aromatic chemistry, and the parent of the bright azo dyes.

Diazonium salts

Diazonium salts have the general formula R–N₂⁺X⁻, where R is an aryl group and X⁻ is Cl⁻, Br⁻, HSO₄⁻, BF₄⁻ and so on. They are named by adding 'diazonium' to the parent hydrocarbon, then the anion: C₆H₅N₂⁺Cl⁻ is benzenediazonium chloride; C₆H₅N₂⁺HSO₄⁻ is benzenediazonium hydrogensulphate. Primary aliphatic amines give highly unstable alkyldiazonium salts (lesson 4), but arenediazonium salts are stable for a short time in cold solution (273–278 K), because the positive charge of the –N₂⁺ group is delocalised over the benzene ring by resonance.

Preparation: diazotisation

Aniline reacts with nitrous acid at 273–278 K; the nitrous acid is made in the mixture from sodium nitrite and hydrochloric acid:
C₆H₅NH₂ + NaNO₂ + 2HCl → C₆H₅N₂⁺Cl⁻ + NaCl + 2H₂O.
This conversion of a primary aromatic amine into a diazonium salt is diazotisation. Because the salt is unstable, it is used at once, not stored.

Properties. Benzenediazonium chloride is a colourless crystalline solid, readily soluble in water, stable in the cold but reacting with water when warmed, and decomposes easily when dry. Benzenediazonium fluoroborate is insoluble in water and stable at room temperature.

A. Reactions in which nitrogen is replaced

The –N₂⁺ group is an excellent leaving group; it escapes as N₂ gas and is replaced by another group.

Replacement reactions of benzenediazonium chloride
ReagentGroup introducedProduct from C₆H₅N₂⁺Cl⁻Name
CuCl/HCl–ClC₆H₅ClSandmeyer reaction
CuBr/HBr–BrC₆H₅BrSandmeyer reaction
CuCN/KCN–CNC₆H₅CNSandmeyer reaction
Cu powder with HCl or HBr–Cl or –BrC₆H₅Cl or C₆H₅BrGattermann reaction (lower yield than Sandmeyer)
KI–IC₆H₅INo copper salt needed
HBF₄, then heat–FC₆H₅F (via C₆H₅N₂⁺BF₄⁻)Fluoroborate decomposes on heating
H₃PO₂ (phosphinic acid) or CH₃CH₂OH–HC₆H₆Mild reduction; reagent oxidised to H₃PO₃ or ethanal
Warm water (temperature allowed to rise to about 283 K)–OHC₆H₅OHHydrolysis to phenol
HBF₄, then NaNO₂/Cu, heat–NO₂C₆H₅NO₂Via the fluoroborate

B. Reactions in which the diazo group is kept: coupling

The diazonium ion is a weak electrophile. With phenol it attacks the para position to give p-hydroxyazobenzene (an orange dye); with aniline it gives p-aminoazobenzene (yellow). These are electrophilic substitution reactions, called coupling reactions. The products contain two aromatic rings joined by –N=N–, an extended conjugated system, so they are coloured and used as azo dyes.

Making an azo dye from aniline

  1. Aniline Primary aromatic amine.
  2. NaNO₂ + HCl at 273–278 K Benzenediazonium chloride.
  3. Phenol in alkaline solution Coupling at the para position.
  4. p-Hydroxyazobenzene Orange azo dye, C₆H₅–N=N–C₆H₄–OH.

Importance in synthesis

Diazonium salts introduce –F, –Cl, –Br, –I, –CN, –OH and –NO₂ into an aromatic ring. They solve problems that direct substitution cannot: aryl fluorides and iodides cannot be made by direct halogenation; –CN cannot be introduced by substituting chlorobenzene; and because –NH₂ (made from –NO₂) can be removed by replacement with –H, it can be used temporarily to steer other groups into positions they would not otherwise reach.

Worked example 1: 1,3,5-tribromobenzene from aniline

Plan a synthesis of 3,5-dibromotoluene. Direct bromination of toluene cannot give it, because –CH₃ directs ortho and para.

(1) Start from p-toluidine (4-methylaniline). With bromine water, the strongly activating –NH₂ directs both Br atoms to its own ortho positions, which are meta to –CH₃: 4-amino-3,5-dibromotoluene.
(2) Diazotise with NaNO₂/HCl at 273–278 K.
(3) Replace –N₂⁺ by H with H₃PO₂ (or ethanol) → 3,5-dibromotoluene. The amino group steered the bromine and was then removed.

Worked example 2: yield of chlorobenzene

18.6 g of aniline (93 g mol⁻¹) is diazotised and converted completely to chlorobenzene by the Sandmeyer reaction. Find the mass of chlorobenzene (112.5 g mol⁻¹) and the amount of N₂ evolved.

n(aniline) = 18.6 ÷ 93 = 0.20 mol → 0.20 mol diazonium salt → 0.20 mol C₆H₅Cl and 0.20 mol N₂.
Mass of chlorobenzene = 0.20 × 112.5 = 22.5 g; N₂ evolved = 0.20 mol (5.6 g).

Key takeaways

  • Diazotisation: ArNH₂ + NaNO₂ + 2HCl at 273–278 K → ArN₂⁺Cl⁻; use immediately.
  • Arenediazonium ions are stabilised by resonance; alkyldiazonium ions decompose at once.
  • N₂ replaced: Cl, Br, CN (CuX, Sandmeyer; Cu/HX, Gattermann), I (KI), F (HBF₄, heat), H (H₃PO₂), OH (warm water), NO₂.
  • Coupling with phenol or aniline gives coloured azo compounds (–N=N–), used as dyes.

Check your understanding

  1. 1. At what temperature is benzenediazonium chloride prepared, and why?

    1. 373 K, to speed up the reaction
    2. 273–278 K, because the diazonium salt decomposes at higher temperatures
    3. 298 K, because nitrous acid is stable then
    4. 453 K, to remove water
    Show answer

    Answer: B. Arenediazonium salts are stable only for a short time in cold solution. Above about 278 K they begin to react with water (giving phenol and N₂), so diazotisation is done in ice at 273–278 K.

  2. 2. Which reagent converts benzenediazonium chloride into benzonitrile?

    1. KCN alone
    2. HCN
    3. KI
    4. CuCN
    Show answer

    Answer: D. The Sandmeyer reaction uses a copper(I) salt to introduce Cl, Br or CN. CuCN (with KCN) replaces –N₂⁺ by –CN to give C₆H₅CN.

  3. 3. Which product forms when benzenediazonium chloride is treated with hypophosphorous acid (H₃PO₂)?

    1. Phenol
    2. Benzene
    3. Chlorobenzene
    4. Aniline
    Show answer

    Answer: B. H₃PO₂ is a mild reducing agent that replaces the diazonium group by hydrogen, giving benzene, while it is itself oxidised to phosphorous acid.

  4. 4. What is formed when benzenediazonium chloride reacts with phenol in alkaline solution?

    1. p-Hydroxyazobenzene, an orange dye
    2. Diphenyl ether
    3. Chlorobenzene and phenol
    4. Benzoic acid
    Show answer

    Answer: A. The diazonium ion acts as an electrophile and couples at the para position of phenol, keeping the –N=N– link: C₆H₅–N=N–C₆H₄–OH, p-hydroxyazobenzene, an orange azo dye.

  5. 5. Assertion (A): Iodobenzene is made from benzenediazonium chloride and KI rather than by direct iodination of benzene. Reason (R): Direct iodination of benzene is reversible and does not easily give a good yield, while diazonium salts react readily with KI.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. Iodine does not easily substitute benzene directly (the reaction is reversible and needs an oxidising agent), but shaking a diazonium salt with KI gives iodobenzene smoothly. R explains A.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Amines

Privacy · Terms · Refunds · Delivery