• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: Amines

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes, without looking back at the lessons. The questions mix all five lessons, include tests, syntheses and calculations, and are harder on average than the lesson checks. Mark your answers first, then read every explanation.

Final self-assessment

  1. 1. How many of the structural isomers of C₄H₁₁N will liberate nitrogen gas with nitrous acid?

    1. 2
    2. 3
    3. 4
    4. 8
    Show answer

    Answer: C. Only primary aliphatic amines give N₂ with HNO₂. C₄H₁₁N has eight amine isomers; the primary ones are butan-1-amine, butan-2-amine, 2-methylpropan-1-amine and 2-methylpropan-2-amine: four. The other four are secondary or tertiary.

  2. 2. Which order of boiling points is correct?

    1. (CH₃)₂NH < C₂H₅NH₂ < C₂H₅OH
    2. C₂H₅OH < C₂H₅NH₂ < (CH₃)₂NH
    3. C₂H₅NH₂ < (CH₃)₂NH < C₂H₅OH
    4. (CH₃)₂NH < C₂H₅OH < C₂H₅NH₂
    Show answer

    Answer: A. All have similar molar masses. The secondary amine has one N–H, the primary two, and the alcohol forms the strongest hydrogen bonds because O is more electronegative than N.

  3. 3. Assertion (A): Primary amines boil at higher temperatures than isomeric tertiary amines. Reason (R): Tertiary amines have a higher molar mass than their primary isomers.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: C. A is true. R is false: isomers have the same molar mass. Primary amines boil higher because they have two N–H hydrogens for intermolecular hydrogen bonding, while tertiary amines have none.

  4. 4. Which sequence converts 1-bromopropane into butan-1-amine?

    1. NH₃ (excess)
    2. KCN, then LiAlH₄
    3. Gabriel synthesis
    4. Br₂/NaOH
    Show answer

    Answer: B. One carbon must be added. CH₃CH₂CH₂Br + KCN → CH₃CH₂CH₂CN, and LiAlH₄ reduces the nitrile to CH₃CH₂CH₂CH₂NH₂. Ammonolysis or Gabriel synthesis would give propan-1-amine, with no extra carbon.

  5. 5. Compound X gives ethanamine on treatment with Br₂ and NaOH (Hoffmann bromamide degradation). What is X?

    1. Ethanamide
    2. Propanamide
    3. Butanamide
    4. Propanenitrile
    Show answer

    Answer: B. Hoffmann degradation converts an amide into a primary amine with one carbon fewer. Ethanamine has two carbons, so the amide must have three: propanamide, CH₃CH₂CONH₂. A nitrile does not undergo this reaction.

  6. 6. Which arrangement shows increasing basic strength in water?

    1. C₆H₅NH₂ < NH₃ < C₂H₅NH₂ < (C₂H₅)₂NH
    2. NH₃ < C₆H₅NH₂ < C₂H₅NH₂ < (C₂H₅)₂NH
    3. (C₂H₅)₂NH < C₂H₅NH₂ < NH₃ < C₆H₅NH₂
    4. C₂H₅NH₂ < C₆H₅NH₂ < NH₃ < (C₂H₅)₂NH
    Show answer

    Answer: A. pKb values: aniline 9.38, NH₃ 4.75, ethanamine 3.29, N-ethylethanamine 3.00. Smaller pKb means stronger base, so the order of increasing strength is C₆H₅NH₂ < NH₃ < C₂H₅NH₂ < (C₂H₅)₂NH.

  7. 7. What is the approximate pH of a 0.010 M solution of an amine with Kb = 1.0 × 10⁻⁴ at 298 K?

    1. 10.0
    2. 11.0
    3. 12.0
    4. 3.0
    Show answer

    Answer: B. [OH⁻] ≈ √(Kb × c) = √(1.0 × 10⁻⁴ × 0.010) = √(1.0 × 10⁻⁶) = 1.0 × 10⁻³ M, so pOH = 3.0 and pH = 14 − 3.0 = 11.0.

  8. 8. Why is methylamine more basic than ammonia, but trimethylamine less basic than methylamine in water?

    1. Only the inductive effect operates
    2. Solvation of the ammonium ion by hydrogen bonding decreases as N–H hydrogens are replaced, offsetting the +I effect
    3. Trimethylamine has no lone pair
    4. Methylamine is a gas
    Show answer

    Answer: B. The +I effect of alkyl groups increases basicity, but in water the cation is also stabilised by hydrogen bonding through its N–H hydrogens. (CH₃)₃NH⁺ has only one, so it is poorly solvated, and trimethylamine ends up weaker than methylamine in water.

  9. 9. Which reagent distinguishes propan-1-amine from N,N-dimethylethanamine?

    1. Dilute HCl
    2. Chloroform and ethanolic KOH
    3. Red litmus paper
    4. Water
    Show answer

    Answer: B. Propan-1-amine is a primary amine and gives a foul-smelling isocyanide in the carbylamine test; the tertiary amine does not. Both are basic, dissolve in dilute HCl and turn red litmus blue.

  10. 10. An amine C₄H₁₁N reacts with benzenesulphonyl chloride to give a product that dissolves in aqueous KOH. Which could it be?

    1. N,N-Dimethylethanamine
    2. N-Ethylethanamine
    3. Butan-1-amine
    4. N-Methylpropan-2-amine
    Show answer

    Answer: C. A product soluble in alkali has an acidic N–H, which arises only from a primary amine. Butan-1-amine is primary; the others are secondary (insoluble product) or tertiary (no reaction).

  11. 11. How can p-nitroaniline be obtained as the major product from aniline?

    1. Direct nitration with conc. HNO₃/H₂SO₄
    2. Acetylation, then nitration, then hydrolysis
    3. Diazotisation, then nitration
    4. Sulphonation at 473 K, then nitration
    Show answer

    Answer: B. Acetylation tames the –NH₂ group and prevents protonation and oxidation; nitration of acetanilide gives mainly the para product; hydrolysis then gives p-nitroaniline. Direct nitration gives oxidation products and much m-nitroaniline.

  12. 12. What is the main product when aniline is heated with concentrated H₂SO₄ at 453–473 K?

    1. Sulphanilic acid (p-aminobenzenesulphonic acid)
    2. m-Aminobenzenesulphonic acid
    3. Anilinium hydrogensulphate only
    4. Benzenesulphonic acid
    Show answer

    Answer: A. Aniline first forms anilinium hydrogensulphate, which on heating at 453–473 K rearranges mainly to p-aminobenzenesulphonic acid, sulphanilic acid.

  13. 13. Which conversion sequence gives fluorobenzene from aniline?

    1. NaNO₂/HCl at 273 K, then HBF₄, then heat
    2. HF directly
    3. F₂ with FeF₃
    4. NaNO₂/HCl, then KF at room temperature
    Show answer

    Answer: A. Diazotisation gives benzenediazonium chloride; HBF₄ precipitates benzenediazonium fluoroborate, which decomposes on heating to fluorobenzene, BF₃ and N₂. Direct fluorination is far too violent.

  14. 14. Which pair of reagents gives the higher yield of chlorobenzene from benzenediazonium chloride?

    1. Cu powder and HCl (Gattermann)
    2. CuCl and HCl (Sandmeyer)
    3. Both give identical yields
    4. Cl₂ gas
    Show answer

    Answer: B. Both the Sandmeyer (Cu(I) salt) and Gattermann (copper powder with HX) reactions replace –N₂⁺ by Cl, but the Sandmeyer reaction gives the better yield.

  15. 15. 4.65 g of aniline (93 g mol⁻¹) is diazotised and coupled completely with phenol. What mass of p-hydroxyazobenzene (198 g mol⁻¹) forms?

    1. 4.65 g
    2. 19.8 g
    3. 9.9 g
    4. 1.98 g
    Show answer

    Answer: C. n(aniline) = 4.65 ÷ 93 = 0.050 mol, giving 0.050 mol of diazonium salt and 0.050 mol of the azo compound. Mass = 0.050 × 198 = 9.9 g.

Questions 1-3: lesson 1 (structure, names, properties). Questions 4-5: lesson 2 (preparation). Questions 6-8: lesson 3 (basicity). Questions 9-12: lesson 4 (reactions and tests). Questions 13-15: lesson 5 (diazonium salts).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery