• Foundation
  • About 25 min
  • 15 practice questions

Final self-assessment: Production and Costs

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all fifteen questions first without looking back at the lessons, and note your answer for each. Then check the answers and read every explanation, including those for questions you got right. Any numbers in these questions are made up for practice.

Final self-assessment

  1. 1. Which statement about the long run is correct according to the textbook?

    1. It is any period longer than one year
    2. It is a period in which all inputs can be varied
    3. It is a period in which capital is fixed
    4. It is the same length for every production process
    Show answer

    Answer: B. The book defines the long run as a period in which all inputs can be varied, and warns against defining it in calendar time because the length differs between processes.

  2. 2. In an illustrative production table, 20 units can be made with (L = 1, K = 5), (L = 2, K = 3) and (L = 4, K = 2). The curve joining these combinations is:

    1. An indifference curve
    2. A total product curve
    3. An isoquant
    4. A cost curve
    Show answer

    Answer: C. A curve joining input combinations that give the same maximum output is an isoquant.

  3. 3. TP of labour is 12, 30, 45, 52 for 1 to 4 workers (illustrative). Which worker has the highest MP?

    1. The 1st
    2. The 3rd
    3. The 4th
    4. The 2nd
    Show answer

    Answer: D. MPs: 12, 30 − 12 = 18, 45 − 30 = 15, 52 − 45 = 7. The second worker adds the most (18).

  4. 4. Using TP 12, 30, 45, 52 for 1 to 4 workers (illustrative), AP at 3 workers is:

    1. 15
    2. 45
    3. 13
    4. 18
    Show answer

    Answer: A. AP = TP/L = 45/3 = 15 units per worker.

  5. 5. The law of variable proportions arises because:

    1. All inputs are increased in the same proportion
    2. Factor proportions change as more of the variable input is added to a fixed input
    3. Input prices rise as output rises
    4. Technology improves in the short run
    Show answer

    Answer: B. With one factor fixed, adding the other changes factor proportions: first towards a more suitable ratio (MP rises), then towards crowding (MP falls).

  6. 6. All inputs are tripled and output rises from 20 to 75 units. Returns to scale are:

    1. Increasing, since 75 is more than 3 × 20 = 60
    2. Constant
    3. Decreasing
    4. Diminishing marginal product
    Show answer

    Answer: A. Constant returns would give 3 × 20 = 60. Output of 75 exceeds 60, so output rises more than in proportion: increasing returns to scale.

  7. 7. For q = L^0.3 K^0.5, if both inputs are doubled, output:

    1. Doubles exactly
    2. More than doubles
    3. Rises by less than double, since α + β = 0.8 < 1
    4. Does not change
    Show answer

    Answer: C. Output is multiplied by 2^(α+β) = 2^0.8, which is less than 2 because α + β = 0.8 < 1: decreasing returns to scale.

  8. 8. The cost function of a firm gives:

    1. The average of all possible costs of each output
    2. The least cost of producing each level of output at given input prices and technology
    3. The highest cost the firm can pay
    4. The price at which output is sold
    Show answer

    Answer: B. For each output the firm chooses the cheapest input combination, so the cost function records the least cost of producing each output.

  9. 9. TC at outputs 0, 1, 2, 3 is ₹25, 45, 60, 70 (illustrative). AVC at 3 units is:

    1. ₹23.33
    2. ₹10
    3. ₹15
    4. ₹15.67
    Show answer

    Answer: C. TFC = TC at zero = ₹25. TVC at 3 = 70 − 25 = ₹45. AVC = 45/3 = ₹15. Check alternatives: 70/3 ≈ 23.33 is SAC, not AVC; ₹10 is SMC of the 3rd unit. So the answer is ₹15.

  10. 10. Which set of figures is consistent for one firm at the same output?

    1. SAC ₹20, AVC ₹14, AFC ₹6
    2. SAC ₹20, AVC ₹24, AFC ₹4
    3. SAC ₹20, AVC ₹14, AFC ₹8
    4. SAC ₹14, AVC ₹20, AFC ₹6
    Show answer

    Answer: A. SAC must equal AVC + AFC. Only 14 + 6 = 20 matches SAC = ₹20. The others break the identity (24 + 4 = 28, 14 + 8 = 22, 20 + 6 = 26).

  11. 11. A firm's SMCs for the first five units are ₹20, 14, 11, 13, 18 and TFC is ₹40 (illustrative). TC at 5 units is:

    1. ₹76
    2. ₹116
    3. ₹56
    4. ₹136
    Show answer

    Answer: B. TVC = sum of SMCs = 20 + 14 + 11 + 13 + 18 = ₹76. TC = TVC + TFC = 76 + 40 = ₹116.

  12. 12. In the short run, as output increases, the vertical gap between the SAC and AVC curves:

    1. Widens, because AFC rises
    2. Stays constant, because TFC is constant
    3. Becomes negative
    4. Narrows, because AFC falls
    Show answer

    Answer: D. The gap SAC − AVC equals AFC = TFC/q, which falls as q rises. So the two curves come closer as output grows.

  13. 13. Case: A made-up firm finds that when SMC is ₹9, AVC is ₹11. Which is certainly true at this output?

    1. AVC is falling
    2. AVC is rising
    3. AVC is at its minimum
    4. SAC is below AVC
    Show answer

    Answer: A. Marginal cost below the average pulls the average down, so AVC is falling. SAC can never be below AVC, since SAC = AVC + AFC.

  14. 14. Why is there no fixed cost in the long run?

    1. Because output is zero in the long run
    2. Because all inputs can be varied, so no input is fixed
    3. Because prices are fixed
    4. Because firms do not pay rent in the long run
    Show answer

    Answer: B. Fixed cost is the cost of fixed inputs. In the long run every input can be varied, so there are no fixed inputs and no fixed cost; TC and TVC coincide.

  15. 15. Assertion (A): The falling part of the LRAC curve corresponds to increasing returns to scale. Reason (R): Under IRS, a proportional increase in output needs a less than proportional increase in inputs and hence in cost.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. If cost rises less than proportionally with output, cost per unit falls - the downward-sloping part of LRAC. R explains A.

Questions 1-2: lesson 1 (production function, short and long run, isoquants). Questions 3-5: lesson 2 (TP, AP, MP and the law of variable proportions). Questions 6-8: lesson 3 (returns to scale and the cost function). Questions 9-11: lesson 4 (short run cost schedules). Questions 12-15: lesson 5 (shapes of cost curves and long run costs).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery