- Foundation
- About 22 min
- 5 practice questions
Drift of electrons, relaxation time and mobility
Derive the drift velocity vd = eEτ/m from collisions, relate current to drift by I = neAvd, obtain σ = ne²τ/m (the origin of Ohm's law), and define mobility μ = vd/E.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why free electrons have zero average velocity without a field.
- Derive the drift velocity vd = −eEτ/m using the relaxation time τ.
- Derive I = neAvd and the conductivity σ = ne²τ/m.
- Define mobility and calculate drift speed, relaxation time and mobility.
Switch on a room light and it glows at once, yet the electrons in the wire actually crawl along at a fraction of a millimetre per second. How can both be true? The answer comes from a simple picture of electrons colliding with ions - a picture that also explains where Ohm's law comes from.
Random motion without a field
Free electrons in a metal move fast and randomly. Each collision with a fixed ion sends an electron off with the same speed but in a completely random direction. Averaged over all N electrons, the velocities cancel: (1/N) Σ vᵢ = 0. There is no net flow.
Drift in an electric field
Apply a field E. Every electron (charge −e, mass m) now accelerates at a = −eE/m between collisions. Consider electron i, whose last collision was a time tᵢ ago, leaving it with velocity vᵢ. Its velocity now is Vᵢ = vᵢ − eE tᵢ/m.
- Average over all electrons. The average of vᵢ is zero, because velocities just after collisions point randomly.
- Collisions happen at random times, so some tᵢ are longer and some shorter; their average is τ, the relaxation time (average time between collisions).
- So the average velocity is vd = −eEτ/m.
vd = −(eτ/m) E: the drift velocity. It is constant in time and opposite to E for electrons.
Although each electron accelerates between collisions, every collision wipes out its gained velocity in a random direction, so on average the electrons acquire only a small steady drift superposed on their fast random motion. Each electron's path is straight between collisions without a field, and gently curved with one.
Life of a free electron in a field
- Collision with an ion Leaves in a random direction; drift gained so far is lost.
- Accelerates The field adds velocity −eE/m per second, opposite to E.
- Next collision Comes on average a time τ later; again the direction is randomised.
- Net result A steady average drift vd = eEτ/m opposite to E.
Then back to step 1: Collision with an ion
Current in terms of drift velocity
Take an area A inside the conductor, normal to E. In a short time Δt, all electrons within a distance |vd|Δt on one side cross it, that is, the electrons in a volume A|vd|Δt. If n is the number of free electrons per unit volume, the charge crossing is ne A|vd|Δt. Since this equals IΔt:
I = neA|vd|, so j = ne|vd|.
Substituting |vd| = eEτ/m gives j = (ne²τ/m) E. This has exactly the form of Ohm's law j = σE, with:
σ = ne²τ/m, and ρ = 1/σ = m/(ne²τ).
So the simple collision picture reproduces Ohm's law, provided n and τ do not depend on E. It also tells us what resistivity depends on: the number density of carriers n and the time between collisions τ.
Mobility
The carriers of current are electrons in metals, electrons and positive ions in an ionised gas, and positive and negative ions in an electrolyte. How readily a carrier drifts is measured by its mobility:
μ = |vd|/E = eτ/m. SI unit: m² V⁻¹ s⁻¹ (1 m² V⁻¹ s⁻¹ = 10⁴ cm² V⁻¹ s⁻¹). Mobility is taken as positive.
Worked example 1: drift speed in a copper wire
A copper wire of cross-section 1.0 × 10⁻⁶ m² carries 1.7 A. Take n = 8.5 × 10²⁸ m⁻³ (about one free electron per copper atom) and e = 1.6 × 10⁻¹⁹ C. vd = I/(neA) = 1.7 ÷ (8.5 × 10²⁸ × 1.6 × 10⁻¹⁹ × 1.0 × 10⁻⁶) = 1.7 ÷ 1.36 × 10⁴ = 1.25 × 10⁻⁴ m s⁻¹ (0.125 mm s⁻¹). To drift along 1 m of wire an electron would need 1 ÷ 1.25 × 10⁻⁴ = 8000 s, over two hours.
Why the light still comes on at once
When the switch closes, the electric field is set up all along the circuit almost instantly - it travels at nearly the speed of light, about 3 × 10⁸ m s⁻¹. Electrons everywhere in the wire, including those already in the bulb's filament, start drifting together. Current does not wait for electrons to travel from the switch. A large current flows despite the tiny drift speed because n is enormous, about 10²⁹ per cubic metre. And drift does not mean all electrons move the same way: it is a small bias on top of random velocities of the order of 10⁵ to 10⁶ m s⁻¹.
Worked example 2: relaxation time and mobility of copper
Copper has resistivity about 1.7 × 10⁻⁸ Ω m at room temperature. Using τ = m/(ne²ρ) with m = 9.1 × 10⁻³¹ kg: ne²ρ = 8.5 × 10²⁸ × (1.6 × 10⁻¹⁹)² × 1.7 × 10⁻⁸ = 8.5 × 10²⁸ × 2.56 × 10⁻³⁸ × 1.7 × 10⁻⁸ ≈ 3.7 × 10⁻¹⁷. So τ ≈ 9.1 × 10⁻³¹ ÷ 3.7 × 10⁻¹⁷ ≈ 2.5 × 10⁻¹⁴ s. Mobility μ = eτ/m = 1.6 × 10⁻¹⁹ × 2.5 × 10⁻¹⁴ ÷ 9.1 × 10⁻³¹ ≈ 4.4 × 10⁻³ m² V⁻¹ s⁻¹.
Worked example 3: drift from mobility
A carrier with mobility 4.0 × 10⁻³ m² V⁻¹ s⁻¹ is in a field of 0.5 V m⁻¹. vd = μE = 4.0 × 10⁻³ × 0.5 = 2.0 × 10⁻³ m s⁻¹. Doubling the field doubles the drift speed - the drift is proportional to E, not to time.
Key takeaways
- Without a field the average velocity of free electrons is zero.
- With a field, vd = eEτ/m opposite to E; τ is the average time between collisions.
- I = neAvd; σ = ne²τ/m and ρ = m/(ne²τ) - this is the origin of Ohm's law.
- Mobility μ = vd/E = eτ/m, in m² V⁻¹ s⁻¹.
Check your understanding
-
1. In the absence of an electric field, the average velocity of the free electrons in a metal is
- equal to their thermal speed
- zero
- equal to the drift speed
- directed towards the positive end of the wire
Show answer
Answer: B. After each collision an electron leaves in a random direction, so the velocities of all the electrons average to zero and there is no net current.
-
2. A copper wire (n = 8.5 × 10²⁸ m⁻³) of cross-section 2.0 × 10⁻⁶ m² carries 2.72 A. What is the drift speed? (e = 1.6 × 10⁻¹⁹ C)
- 1.0 × 10⁻⁴ m s⁻¹
- 1.0 × 10⁻³ m s⁻¹
- 2.0 × 10⁻⁴ m s⁻¹
- 5.0 × 10⁻⁵ m s⁻¹
Show answer
Answer: A. vd = I/(neA) = 2.72 ÷ (8.5 × 10²⁸ × 1.6 × 10⁻¹⁹ × 2.0 × 10⁻⁶) = 2.72 ÷ 2.72 × 10⁴ = 1.0 × 10⁻⁴ m s⁻¹.
-
3. If the relaxation time of the electrons in a metal doubles while everything else stays the same, its resistivity
- doubles
- halves
- becomes four times
- stays the same
Show answer
Answer: B. ρ = m/(ne²τ), so ρ ∝ 1/τ. Doubling τ halves the resistivity.
-
4. Electrons drift at 3 × 10⁻⁴ m s⁻¹ in a field of 0.06 V m⁻¹. What is their mobility?
- 1.8 × 10⁻⁵ m² V⁻¹ s⁻¹
- 2 × 10² m² V⁻¹ s⁻¹
- 5 × 10⁻² m² V⁻¹ s⁻¹
- 5 × 10⁻³ m² V⁻¹ s⁻¹
Show answer
Answer: D. μ = vd/E = 3 × 10⁻⁴ ÷ 0.06 = 5 × 10⁻³ m² V⁻¹ s⁻¹.
-
5. Assertion (A): Free electrons in a wire move with a constant average drift velocity even though the field exerts a constant force on them. Reason (R): Collisions with ions repeatedly randomise the electrons' velocities, so the velocity gained from the field does not keep building up.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Between collisions each electron accelerates, but every collision resets its direction, so on average it only gains eEτ/m. R is the explanation of A.
Sign in to keep track of the lessons you finish.