- Foundation
- About 20 min
- 5 practice questions
Electric current, Ohm's law and resistivity
Define electric current, explain why a steady current needs a source, state Ohm's law, derive R = ρl/A, and use current density and conductivity in the form j = σE.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define electric current and its SI unit, including for a changing current.
- Explain why a steady current needs a source that keeps the field in a conductor.
- State Ohm's law and show how resistance depends on length and cross-section.
- Use resistivity, current density and conductivity, and write Ohm's law as j = σE.
In electrostatics every charge was at rest. Set charges moving and you have an electric current - the flow that lights a torch bulb, runs a clock and, in a violent unsteady burst, makes lightning. This chapter studies steady currents and the laws that govern them.
Electric current
Imagine a small area held across the direction in which charges flow. In a time t, let q be the net charge crossing it in the forward direction (positive charge forward minus positive charge backward, with negative charge counted the opposite way). For a steady flow, the current is I = q/t. For a current that changes with time we take the limit over a tiny interval:
I = lim (Δt → 0) ΔQ/Δt. SI unit: ampere (A), a base unit defined through the magnetic effect of currents; 1 A = 1 C s⁻¹.
Household appliances draw currents of the order of an ampere; a lightning stroke carries tens of thousands of amperes; signals in our nerves are in microamperes. A negative value of I simply means the current is in the backward direction.
Current in a conductor
In atoms, electrons are bound to nuclei. In bulk metals, however, some electrons are practically free to move through the material, while the positive ions stay fixed. (In electrolytes, both positive and negative ions move.) Without a field, the free electrons move randomly due to thermal motion, colliding with ions and leaving in random directions, so as many cross any area one way as the other: no net current.
Now put charges +Q and −Q on the two ends of a metal cylinder. A field appears from + to −, and electrons drift towards +Q, neutralising the charges - and the current stops after a very short time. To keep a steady current we need a device that keeps replenishing the end charges, and so keeps a steady field inside the conductor. That device is a cell or battery.
Ohm's law
In 1828 G. S. Ohm found that for a metallic conductor at constant temperature, the current is proportional to the potential difference across it:
V = RI, where R is the resistance of the conductor. SI unit: ohm (Ω), 1 Ω = 1 V A⁻¹.
How R depends on size. Place two identical slabs end to end: the same current I flows through both, while the potential difference doubles to 2V, so the resistance doubles - R ∝ l. Now split a slab lengthwise into two halves, each of area A/2: with the same V across each, each carries I/2, so each has resistance 2R - halving the area doubles R, so R ∝ 1/A. Together:
R = ρ l/A, where ρ (resistivity) depends on the material and temperature but not on its size. Unit of ρ: Ω m.
Current density and conductivity
Current per unit area normal to the flow is the current density j = I/A (unit A m⁻²). In a uniform conductor of length l, V = El. Substituting into V = I ρ l/A gives El = jρl, so E = ρj. Since j points along E:
j = σE, where σ = 1/ρ is the conductivity (unit S m⁻¹, siemens per metre). This is Ohm's law written for a point inside the material.
From a potential difference to a current
- Source keeps a potential difference V A cell maintains V across the ends of the wire.
- Uniform field inside E = V/l along the wire.
- Current density j = σE = E/ρ at every point.
- Current I = jA, which gives V = I (ρl/A) = IR.
Worked example 1: current and electrons
90 C of charge passes through a lamp in one minute. I = Q/t = 90 ÷ 60 = 1.5 A. Number of electrons passing each second = I/e = 1.5 ÷ 1.6 × 10⁻¹⁹ ≈ 9.4 × 10¹⁸.
Worked example 2: resistance, current density and field
A wire 2 m long with cross-section 5 × 10⁻⁷ m² is made of a material of resistivity 1.0 × 10⁻⁶ Ω m (an illustrative value). R = ρl/A = 1.0 × 10⁻⁶ × 2 ÷ 5 × 10⁻⁷ = 4 Ω. With 6 V across it, I = V/R = 1.5 A, j = I/A = 1.5 ÷ 5 × 10⁻⁷ = 3 × 10⁶ A m⁻², and E = V/l = 3 V m⁻¹. Check: j = E/ρ = 3 ÷ 1.0 × 10⁻⁶ = 3 × 10⁶ A m⁻². The two routes agree.
Worked example 3: stretching a wire
A wire of resistance R is stretched uniformly to twice its length. Its volume (lA) stays the same, so the area halves. R′ = ρ(2l)/(A/2) = 4ρl/A = 4R. In general, stretching to n times the length multiplies R by n².
Key takeaways
- I = dQ/dt in amperes; a steady current needs a source that maintains the field.
- Ohm's law V = RI; R = ρl/A, with ρ a property of the material.
- Current density j = I/A; at a point, j = σE with σ = 1/ρ.
Check your understanding
-
1. A steady current of 2 A flows in a wire. How much charge passes a cross-section in 5 minutes?
- 10 C
- 600 C
- 150 C
- 0.4 C
Show answer
Answer: B. Q = It = 2 A × (5 × 60) s = 2 × 300 = 600 C.
-
2. A wire has resistance 6 Ω. What is the resistance of another wire of the same material with twice the length and three times the cross-sectional area?
- 9 Ω
- 36 Ω
- 4 Ω
- 1 Ω
Show answer
Answer: C. R = ρl/A, so R′ = 6 × (2/3) = 4 Ω.
-
3. A wire 10 m long with cross-section 5.0 × 10⁻⁷ m² has resistance 4.0 Ω. What is its resistivity?
- 2.0 × 10⁻⁷ Ω m
- 8.0 × 10⁻⁷ Ω m
- 1.25 × 10⁻⁸ Ω m
- 5.0 × 10⁻⁸ Ω m
Show answer
Answer: A. ρ = RA/l = 4.0 × 5.0 × 10⁻⁷ ÷ 10 = 2.0 × 10⁻⁶ ÷ 10 = 2.0 × 10⁻⁷ Ω m.
-
4. A wire of resistance R is stretched uniformly until its length is three times the original. Its new resistance is
- 3R
- R/3
- 6R
- 9R
Show answer
Answer: D. Volume is unchanged, so tripling l reduces A to A/3. R′ = ρ(3l)/(A/3) = 9ρl/A = 9R.
-
5. Assertion (A): Connecting the ends of a metal rod to fixed charges +Q and −Q produces only a momentary current. Reason (R): The electrons drift and neutralise the end charges, so the field inside the rod disappears.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: A. Both are true. Without a source to replenish the end charges, the drifting electrons cancel them and the field, and hence the current, vanishes. R explains A, and is why a cell is needed for a steady current.
Sign in to keep track of the lessons you finish.