• Foundation
  • About 30 min
  • 15 practice questions

Final self-assessment: Electromagnetic induction

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting of about 30 minutes. Use μ₀ = 4π × 10⁻⁷ T m A⁻¹ where needed. The questions mix all five lessons and include numericals and assertion-reason items. Check your answers only after finishing, and read every explanation.

Final self-assessment

  1. 1. A square loop of side 20 cm and resistance 0.4 Ω is in a field of 0.2 T making 60° with its normal. The field drops steadily to zero in 0.5 s. What current is induced?

    1. 10 mA
    2. 20 mA
    3. 40 mA
    4. 8 mA
    Show answer

    Answer: B. Φ = BA cos 60° = 0.2 × 0.04 × 0.5 = 4 × 10⁻³ Wb. ε = Φ/Δt = 4 × 10⁻³ ÷ 0.5 = 8 × 10⁻³ V. I = ε/R = 8 × 10⁻³ ÷ 0.4 = 0.02 A = 20 mA.

  2. 2. The flux through a coil varies as Φ = (3t² + 2t) × 10⁻³ Wb (t in seconds). What emf is induced at t = 2 s?

    1. 16 mV
    2. 14 mV
    3. 12 mV
    4. 8 mV
    Show answer

    Answer: B. ε = dΦ/dt = (6t + 2) × 10⁻³. At t = 2 s: (12 + 2) × 10⁻³ = 14 × 10⁻³ V = 14 mV.

  3. 3. Which change does NOT induce an emf in a flat coil placed in a uniform magnetic field?

    1. Rotating the coil about an axis perpendicular to the field
    2. Changing the strength of the field
    3. Shrinking the coil
    4. Sliding the coil sideways while it stays wholly inside the uniform field
    Show answer

    Answer: D. Sliding the coil within a uniform field leaves B, A and θ unchanged, so the flux is constant and no emf is induced. Each of the other changes alters the flux.

  4. 4. A bar magnet is dropped, north pole downward, through a horizontal copper ring. Looking down from above, the induced current in the ring as the magnet approaches is

    1. clockwise
    2. anticlockwise
    3. zero
    4. first clockwise, then anticlockwise before it reaches the ring
    Show answer

    Answer: B. As the north pole approaches from above, the downward flux through the ring grows. The ring opposes this by making an upward field, i.e. a north pole on its upper face, which requires an anticlockwise current as seen from above.

  5. 5. Assertion (A): When a magnet is pushed into a closed coil, the person pushing must do work. Reason (R): The induced current makes the coil repel the approaching magnet.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. By Lenz's law the induced current makes the near face of the coil a like pole, repelling the magnet, so work is needed; it appears as heat in the coil. R explains A.

  6. 6. A rectangular loop of sides 12 cm and 3 cm, with a small cut, moves out of a uniform field of 0.5 T (normal to the loop) at 2 cm s⁻¹, its velocity perpendicular to its shorter side. What emf appears across the cut, and for how long?

    1. 1.2 mV for 1.5 s
    2. 0.3 mV for 6 s
    3. 0.3 mV for 1.5 s
    4. 1.2 mV for 6 s
    Show answer

    Answer: B. With the velocity perpendicular to the shorter side, the 3 cm side is the edge crossing the field boundary: ε = Blv = 0.5 × 0.03 × 0.02 = 3 × 10⁻⁴ V = 0.3 mV. The loop must travel its 12 cm length to get out: 12 ÷ 2 = 6 s.

  7. 7. A rod rotates about one end with angular speed ω in a uniform field B perpendicular to its plane of rotation. If its length is doubled, the emf between its ends becomes

    1. 2 times
    2. unchanged
    3. 4 times
    4. half
    Show answer

    Answer: C. ε = ½BωR², so ε ∝ R². Doubling R multiplies the emf by 2² = 4.

  8. 8. A conducting rod of length 0.4 m slides at 3 m s⁻¹ on rails in a perpendicular field of 0.5 T; the circuit resistance is 1.2 Ω. What force is needed to keep it moving at constant speed?

    1. 0.6 N
    2. 0.2 N
    3. 0.1 N
    4. 0.06 N
    Show answer

    Answer: C. ε = Blv = 0.5 × 0.4 × 3 = 0.6 V. I = 0.6 ÷ 1.2 = 0.5 A. Opposing force F = BIl = 0.5 × 0.5 × 0.4 = 0.1 N; an equal pull keeps the speed constant.

  9. 9. Assertion (A): An emf is induced in a stationary loop placed in a changing magnetic field. Reason (R): The Lorentz force qv × B acts on the charges of the stationary loop.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: C. A is true (Faraday's experiments). R is false: for stationary charges v = 0, so qv × B = 0. The emf arises because the changing magnetic field produces an electric field, which pushes the charges.

  10. 10. A current through a coil falls from 3 A to zero in 0.05 s, inducing an average emf of 12 V. How much energy was stored in the coil at 3 A?

    1. 0.9 J
    2. 1.8 J
    3. 0.6 J
    4. 0.45 J
    Show answer

    Answer: A. L = εΔt/ΔI = 12 × 0.05 ÷ 3 = 0.2 H. Energy = ½LI² = ½ × 0.2 × 9 = 0.9 J.

  11. 11. A solenoid has self-inductance L. A soft iron core of relative permeability 500 is inserted to fill it. Its self-inductance becomes

    1. L/500
    2. L
    3. 500L
    4. 250 000L
    Show answer

    Answer: C. L = μrμ₀n²Al is directly proportional to μr, so filling the solenoid with μr = 500 gives 500L.

  12. 12. A small coil of radius 1 cm and a large coil of radius 50 cm are coaxial and concentric. What is their mutual inductance? (each has one turn)

    1. 2.5 × 10⁻⁷ H
    2. 1.6 × 10⁻⁹ H
    3. 4 × 10⁻⁹ H
    4. 3.9 × 10⁻¹⁰ H
    Show answer

    Answer: D. M = μ₀πr₁²/(2r₂) = 4π × 10⁻⁷ × π × (0.01)² ÷ (2 × 0.5) = 4π² × 10⁻¹¹ ≈ 3.9 × 10⁻¹⁰ H.

  13. 13. A generator coil of 200 turns and area 0.025 m² rotates at 3000 revolutions per minute in a field of 0.04 T. What is its peak emf?

    1. 62.8 V
    2. 31.4 V
    3. 6.28 V
    4. 2.0 V
    Show answer

    Answer: A. ν = 3000 ÷ 60 = 50 Hz, ω = 2π × 50 ≈ 314 rad s⁻¹. ε₀ = NBAω = 200 × 0.04 × 0.025 × 314 = 0.2 × 314 ≈ 62.8 V.

  14. 14. The peak emf of a generator is 100 V at 50 Hz, with ε = 0 at t = 0. What is the emf at t = 2.5 ms?

    1. 100 V
    2. 50 V
    3. 70.7 V
    4. Zero
    Show answer

    Answer: C. ε = ε₀ sin 2πνt = 100 sin (2π × 50 × 0.0025) = 100 sin (π/4) = 100 × 0.707 ≈ 70.7 V.

  15. 15. In an ac generator, the role of the slip rings and brushes is to

    1. make the current flow in one direction only
    2. connect the rotating coil to the external circuit
    3. increase the magnetic field
    4. reduce the speed of rotation
    Show answer

    Answer: B. The slip rings turn with the coil and the fixed brushes rub on them, carrying the alternating current from the rotating coil to the external circuit without twisting the wires. They do not rectify it.

Questions 1-3: lesson 1 (flux and Faraday's law). Questions 4-5: lesson 2 (Lenz's law). Questions 6-9: lesson 3 (motional emf). Questions 10-12: lesson 4 (inductance and magnetic energy). Questions 13-15: lesson 5 (the ac generator).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery