Revision notes

Chapter 14 Semiconductor Electronics: Materials, Devices and Simple Circuits: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Why semiconductors: classifying solids by conductivity and energy bands

Typical orders of magnitude (σ = 1/ρ); real values can lie outside these ranges
ClassResistivity ρ (Ω m)Conductivity σ (S m⁻¹)
Metals10⁻² to 10⁻⁸10² to 10⁸
Semiconductors10⁻⁵ to 10⁶10⁵ to 10⁻⁶
Insulators10¹¹ to 10¹⁹10⁻¹¹ to 10⁻¹⁹

Energy bands in the three classes of solids

  • Metals
    • Conduction and valence bands overlap, or the conduction band is partly filled
    • E_g ≈ 0
    • Many free electrons: very high conductivity
  • Insulators
    • Large band gap, E_g > 3 eV
    • Heat cannot lift electrons across
    • No conduction electrons: no current
  • Semiconductors
    • Small band gap, E_g < 3 eV
    • At room temperature a few electrons cross the gap
    • Moderate conductivity that rises with temperature
Same group of the periodic table, very different band gaps
Element (group 14)Band gap E_gBehaviour
Carbon (diamond)5.4 eVInsulator
Silicon1.1 eVSemiconductor
Germanium0.7 eVSemiconductor
Tin0 eVMetal

Metals: bands overlap (E_g ≈ 0). Semiconductors: 0 < E_g < 3 eV. Insulators: E_g > 3 eV. Diamond 5.4 eV, Si 1.1 eV, Ge 0.7 eV.

  • Semiconductor devices are small, efficient, low-voltage and reliable compared with vacuum tubes.
  • Solids are classed by resistivity, but more deeply by their band structure.
  • Conduction needs electrons in the conduction band (or vacancies in the valence band).
  • The band gap decides whether a material is a metal, semiconductor or insulator.
Read the full lesson

Lesson 2

Intrinsic semiconductors: electrons and holes

In an intrinsic semiconductor: nₑ = nₕ = nᵢ, where nᵢ is the intrinsic carrier concentration. Total current I = Iₑ + Iₕ.

Apparent motion of a hole

  1. Hole at site 1 A bond at site 1 is missing an electron.
  2. Neighbouring bond electron jumps An electron from the bond at site 2 moves into the vacancy at site 1.
  3. Site 1 is complete The vacancy has disappeared from site 1.
  4. Hole now at site 2 The hole appears to have moved from site 1 to site 2.

Charge carriers in an intrinsic semiconductor

  • Conduction electrons
    • Charge −e
    • Move in the conduction band
    • Drift towards the positive terminal
    • Give electron current Iₑ
  • Holes
    • Effective charge +e
    • Vacancies in the valence band (broken bonds)
    • Drift towards the negative terminal
    • Give hole current Iₕ
  • Si and Ge form covalent bonds in a diamond-like lattice.
  • Thermal energy breaks bonds, creating equal numbers of free electrons and holes.
  • A hole moves when neighbouring bound electrons fill it in turn; it acts as a +e carrier.
  • An intrinsic semiconductor is an insulator at 0 K; its conductivity rises with temperature.
Read the full lesson

Lesson 3

Extrinsic semiconductors: n-type and p-type doping

n-type and p-type semiconductors

  • n-type
    • Dopant: pentavalent (As, Sb, P), a donor
    • Majority carriers: electrons
    • Minority carriers: holes
    • Fixed ions: positive donor ions
    • Donor level E_D just below E_C
  • p-type
    • Dopant: trivalent (In, B, Al), an acceptor
    • Majority carriers: holes
    • Minority carriers: electrons
    • Fixed ions: negative acceptor ions
    • Acceptor level E_A just above E_V

In thermal equilibrium: nₑ × nₕ = nᵢ². n-type: nₑ ≈ N_D (donor concentration), nₕ = nᵢ²/N_D. p-type: nₕ ≈ N_A, nₑ = nᵢ²/N_A.

  • Doping with a few ppm of impurity multiplies conductivity many times.
  • Pentavalent donors give n-type (electrons majority); trivalent acceptors give p-type (holes majority).
  • Doped semiconductors stay electrically neutral.
  • nₑnₕ = nᵢ² links majority and minority carrier numbers.
Read the full lesson

Lesson 4

The p-n junction: formation, forward bias and reverse bias

How a p-n junction reaches equilibrium

  1. Diffusion Holes diffuse from p to n and electrons from n to p, because of the difference in concentrations.
  2. Fixed ions left behind Positive donor ions remain on the n-side; negative acceptor ions remain on the p-side.
  3. Depletion region forms A layer about 0.1 μm thick, emptied of mobile carriers, with an electric field from the n-side to the p-side.
  4. Drift The field pushes electrons from p to n and holes from n to p, opposite to diffusion.
  5. Equilibrium Drift current equals diffusion current: no net current flows.

Forward and reverse bias

  • Forward bias
    • p to +, n to −
    • Barrier lowered to V₀ − V
    • Depletion region narrower
    • Majority carriers cross: current in mA
    • Low resistance
  • Reverse bias
    • p to −, n to +
    • Barrier raised to V₀ + V
    • Depletion region wider
    • Only minority carriers drift: current in μA
    • Very high resistance until breakdown

Forward bias: p to +, barrier V₀ − V, large current (mA). Reverse bias: n to +, barrier V₀ + V, tiny current (μA) until breakdown.

  • Diffusion builds a depletion region of fixed ions; its field drives an opposing drift.
  • At equilibrium diffusion and drift balance, leaving a barrier potential V₀.
  • Forward bias lowers the barrier and injects minority carriers: large current.
  • Reverse bias raises the barrier: only a small, nearly constant minority-carrier current flows until breakdown.
Read the full lesson

Lesson 5

Diode characteristics, rectifiers and filters

Dynamic resistance r_d = ΔV/ΔI. Low (a few ohms) in forward bias above threshold; very high (megohms or more) in reverse bias.

Full-wave rectification with a centre-tap transformer

  1. Centre-tap secondary Ends A and B are always in opposite phase relative to the centre tap.
  2. First half-cycle: A positive Diode D₁ is forward biased and conducts; D₂ is reverse biased.
  3. Second half-cycle: B positive Diode D₂ conducts; D₁ is reverse biased.
  4. Same direction through R_L Both diodes send current the same way through the load.
  5. Output A pulse in every half-cycle: full-wave rectified voltage.
Comparing rectifiers
RectifierDiodesOutput pulses per input cycleOutput ripple frequency for 50 Hz input
Half-wave1150 Hz
Full-wave (centre tap)22100 Hz
  • Forward current rises steeply above the threshold voltage (about 0.7 V for Si, 0.2 V for Ge); reverse current is tiny until breakdown.
  • Dynamic resistance r_d = ΔV/ΔI is low in forward bias and very high in reverse.
  • Half-wave rectifiers use one diode; full-wave (centre-tap) use two and give double the ripple frequency.
  • A capacitor filter with a large R_LC gives nearly steady dc.
Read the full lesson

Privacy · Terms · Refunds · Delivery