• Foundation
  • About 24 min
  • 5 practice questions

The p-n junction: formation, forward bias and reverse bias

Explain how diffusion and drift create the depletion region and barrier potential of a p-n junction, and describe how forward and reverse bias change the barrier and the current.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain diffusion and drift across a p-n junction.
  • Describe the depletion region and the barrier potential.
  • Describe a p-n junction diode under forward bias, including minority carrier injection.
  • Describe a diode under reverse bias and explain breakdown.

Join p-type and n-type semiconductor in one crystal and you get a p-n junction, the building block of diodes, transistors, solar cells and light-emitting diodes. The junction behaves very differently depending on which way a voltage is applied. That one-way behaviour is what makes it useful.

Making a junction

A junction is made inside a single crystal: for example, a thin wafer of p-type silicon has a precise amount of pentavalent impurity added to one part, turning that part n-type. Simply pressing a p-type slab against an n-type slab does not work: however flat they look, their surfaces are rough on a scale far larger than the spacing between atoms (about 2 to 3 Å), so there is no continuous contact and charge carriers meet a break instead of a junction.

Diffusion, drift and the depletion region

How a p-n junction reaches equilibrium

  1. Diffusion Holes diffuse from p to n and electrons from n to p, because of the difference in concentrations.
  2. Fixed ions left behind Positive donor ions remain on the n-side; negative acceptor ions remain on the p-side.
  3. Depletion region forms A layer about 0.1 μm thick, emptied of mobile carriers, with an electric field from the n-side to the p-side.
  4. Drift The field pushes electrons from p to n and holes from n to p, opposite to diffusion.
  5. Equilibrium Drift current equals diffusion current: no net current flows.

As diffusion continues, the charged layers grow, the field strengthens and the drift current rises until it exactly balances the diffusion current. The n-side, having lost electrons, ends up positive relative to the p-side. This potential difference opposes further diffusion of majority carriers and is called the barrier potential V₀.

The junction diode

A semiconductor diode is a p-n junction with metal contacts at each end, a two-terminal device. In its symbol, the arrow points from p to n, the direction of conventional current when the diode conducts.

Forward bias

Connect the p-side to the positive terminal and the n-side to the negative terminal of a battery: forward bias. Almost all the applied voltage V appears across the depletion region, which has very high resistance compared with the p and n regions. V opposes V₀, so the barrier falls to (V₀ − V) and the depletion layer becomes narrower. With a small V only the most energetic carriers cross; as V increases, many more do and the current rises steeply.

Electrons cross from n into p, where they are minority carriers, and holes cross from p into n, where they too are minority carriers. This is minority carrier injection. The injected carriers pile up near the junction edges and diffuse away from them, giving a current that is the sum of the hole diffusion current and the electron diffusion current, usually of the order of milliamperes.

Reverse bias

Connect the n-side to the positive terminal and the p-side to the negative: reverse bias. Now V adds to V₀: the barrier rises to (V₀ + V) and the depletion region widens. Diffusion of majority carriers is almost completely stopped. Only minority carriers that wander near the junction (electrons on the p-side, holes on the n-side) are swept across by the field, giving a small drift current of the order of microamperes. This current hardly depends on V, because even a small voltage sweeps across all the minority carriers available; it is limited by how many minority carriers there are.

At a large enough reverse voltage, the breakdown voltage V_br, the reverse current suddenly rises sharply. If the current is not limited by the circuit to below the rated value, the junction overheats and is destroyed. Too much forward current can destroy a diode in the same way.

Forward and reverse bias

  • Forward bias
    • p to +, n to −
    • Barrier lowered to V₀ − V
    • Depletion region narrower
    • Majority carriers cross: current in mA
    • Low resistance
  • Reverse bias
    • p to −, n to +
    • Barrier raised to V₀ + V
    • Depletion region wider
    • Only minority carriers drift: current in μA
    • Very high resistance until breakdown

Worked example 1: barrier heights

A silicon junction has a barrier potential of 0.7 V. Forward bias of 0.5 V: effective barrier = 0.7 − 0.5 = 0.2 V, so carriers cross easily. Reverse bias of 5 V: effective barrier = 0.7 + 5 = 5.7 V, so majority carriers are blocked and only the tiny minority-carrier current flows.

Worked example 2: identifying the bias

In a circuit the p-side of a diode is at 2.0 V and the n-side at 2.6 V. Since the n-side is at the higher potential, the diode is reverse biased by 0.6 V and carries only a tiny current. If the potentials were swapped (p at 2.6 V, n at 2.0 V), it would be forward biased by 0.6 V.

Forward bias: p to +, barrier V₀ − V, large current (mA). Reverse bias: n to +, barrier V₀ + V, tiny current (μA) until breakdown.

Key takeaways

  • Diffusion builds a depletion region of fixed ions; its field drives an opposing drift.
  • At equilibrium diffusion and drift balance, leaving a barrier potential V₀.
  • Forward bias lowers the barrier and injects minority carriers: large current.
  • Reverse bias raises the barrier: only a small, nearly constant minority-carrier current flows until breakdown.

Check your understanding

  1. 1. The depletion region of a p-n junction contains

    1. many free electrons and holes
    2. immobile ions but almost no free carriers
    3. only free electrons
    4. only holes
    Show answer

    Answer: B. Carriers near the junction diffuse across and recombine, leaving behind fixed donor and acceptor ions. The region is depleted of mobile charges.

  2. 2. When a p-n junction is first formed, what drives holes from the p-side into the n-side?

    1. Attraction by the free electrons of the n-side
    2. The barrier potential
    3. The much higher concentration of holes on the p-side
    4. An external battery
    Show answer

    Answer: C. Diffusion is driven by a concentration difference: there are many more holes on the p-side than on the n-side, so holes spread towards the n-side.

  3. 3. The p-side of a junction diode is connected to the positive terminal of a battery and the n-side to the negative terminal. What happens at the junction?

    1. The barrier is lowered and the depletion region narrows
    2. The barrier is raised
    3. The majority-carrier current stops
    4. The depletion region becomes wider
    Show answer

    Answer: A. Forward bias opposes the barrier, reducing it to V₀ − V and narrowing the depletion region, so majority carriers cross easily and the current rises.

  4. 4. A junction with barrier potential 0.3 V is reverse biased by 4.7 V. The effective barrier is

    1. 4.4 V
    2. 0.3 V
    3. 4.7 V
    4. 5.0 V
    Show answer

    Answer: D. In reverse bias the applied voltage adds to the barrier: V₀ + V = 0.3 + 4.7 = 5.0 V.

  5. 5. Assertion (A): The reverse current of a p-n junction diode remains almost constant over a wide range of reverse voltage. Reason (R): The reverse current is due to minority carriers, and even a small reverse voltage sweeps all the available minority carriers across the junction.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. The reverse current is limited by how many minority carriers exist, not by the voltage. Once all of them are being swept across, a larger voltage cannot increase the current (until breakdown). R explains A.

Privacy · Terms · Refunds · Delivery