• Foundation
  • About 20 min
  • 5 practice questions

Intrinsic semiconductors: electrons and holes

Describe the crystal structure and covalent bonding of silicon and germanium, explain how thermal energy creates electron-hole pairs, and describe conduction by electrons and holes.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Describe the covalent bonding in Si and Ge crystals.
  • Explain how a hole forms and how it moves.
  • State ne = nh = ni for an intrinsic semiconductor.
  • Explain why an intrinsic semiconductor is an insulator at 0 K.

A pure semiconductor, with no deliberate impurities, is called an intrinsic semiconductor. Its few charge carriers come from the material itself. Understanding where they come from, and the surprising idea of a positive 'hole', is the foundation for every device in this chapter.

Crystal structure and bonds

Carbon (diamond), silicon and germanium share the same diamond-like lattice, with lattice spacings of 3.56 Å, 5.43 Å and 5.66 Å respectively. Each atom sits at the centre of four nearest neighbours. Each Si or Ge atom has four valence electrons; it shares one with each neighbour and takes a share of one from each. Each shared pair forms a covalent bond that holds the two atoms together. At very low temperature every bond is intact, and no electron is free.

Breaking a bond: electron-hole pairs

As temperature rises, thermal vibration gives some electrons enough energy to break free of their bonds. Each such electron becomes a conduction electron. It leaves behind a vacancy in the bond. That vacancy has an effective charge +e and is called a hole. In band language, the electron has been lifted from the valence band into the conduction band, leaving a hole in the valence band.

In an intrinsic semiconductor: nₑ = nₕ = nᵢ, where nᵢ is the intrinsic carrier concentration. Total current I = Iₑ + Iₕ.

How a hole moves

Apparent motion of a hole

  1. Hole at site 1 A bond at site 1 is missing an electron.
  2. Neighbouring bond electron jumps An electron from the bond at site 2 moves into the vacancy at site 1.
  3. Site 1 is complete The vacancy has disappeared from site 1.
  4. Hole now at site 2 The hole appears to have moved from site 1 to site 2.

The free electron created earlier takes no part in this. The hole's motion is just a convenient way to describe bound electrons shifting from bond to bond. In an electric field, free electrons drift towards the positive side, giving an electron current Iₑ, while holes drift towards the negative side, giving a hole current Iₕ. Both add up: I = Iₑ + Iₕ.

Generation and recombination

While heat keeps creating electron-hole pairs, some conduction electrons meet holes and fall back into bonds: recombination. At equilibrium the rate of generation equals the rate of recombination, so nᵢ stays constant at a given temperature. At T = 0 K no bonds are broken, the conduction band is empty and the valence band is full: an intrinsic semiconductor then behaves as a perfect insulator. At higher temperature more pairs form and conductivity rises, the opposite of a metal, whose resistance rises with temperature.

Charge carriers in an intrinsic semiconductor

  • Conduction electrons
    • Charge −e
    • Move in the conduction band
    • Drift towards the positive terminal
    • Give electron current Iₑ
  • Holes
    • Effective charge +e
    • Vacancies in the valence band (broken bonds)
    • Drift towards the negative terminal
    • Give hole current Iₕ

Worked example 1: why carbon is an insulator

C, Si and Ge have the same crystal structure and four bonding electrons each, yet carbon (diamond) is an insulator. Reasoning: the bonding electrons lie in the second orbit for C, the third for Si and the fourth for Ge. The further out the electrons, the less energy is needed to free them. So the gap is largest for C (5.4 eV), smaller for Si (1.1 eV) and smallest for Ge (0.7 eV). At room temperature Si and Ge have a useful number of free electrons, but C has a negligible number.

Worked example 2: how few carriers there are

Silicon has about 5 × 10²⁸ atoms m⁻³ and, at room temperature, nᵢ ≈ 1.5 × 10¹⁶ m⁻³. In 1 cm³ (10⁻⁶ m³) of pure silicon: electrons = holes = 1.5 × 10¹⁶ × 10⁻⁶ = 1.5 × 10¹⁰. Fraction of atoms that have lost an electron = 1.5 × 10¹⁶ / 5 × 10²⁸ = 3 × 10⁻¹³, roughly one atom in three million million. This is why pure silicon conducts so poorly.

Worked example 3: splitting the current

A current of 6.0 mA flows through a pure semiconductor bar, and measurements show the electron current is 4.0 mA. The hole current is Iₕ = I − Iₑ = 6.0 − 4.0 = 2.0 mA. Electrons and holes are equal in number, but electrons move more easily, so they carry more of the current.

Key takeaways

  • Si and Ge form covalent bonds in a diamond-like lattice.
  • Thermal energy breaks bonds, creating equal numbers of free electrons and holes.
  • A hole moves when neighbouring bound electrons fill it in turn; it acts as a +e carrier.
  • An intrinsic semiconductor is an insulator at 0 K; its conductivity rises with temperature.

Check your understanding

  1. 1. In an intrinsic semiconductor, the number of free electrons is

    1. much greater than the number of holes
    2. much smaller than the number of holes
    3. equal to the number of holes
    4. zero at room temperature
    Show answer

    Answer: C. Each broken bond produces one free electron and one hole, so nₑ = nₕ = nᵢ.

  2. 2. A hole in a semiconductor is

    1. a positively charged ion fixed in the lattice
    2. a vacancy in a covalent bond that behaves like a positive charge
    3. a free proton
    4. a missing atom in the crystal
    Show answer

    Answer: B. When an electron leaves a bond, the vacancy left behind has an effective charge +e and can move as neighbouring bound electrons fill it. It is not an ion or a missing atom.

  3. 3. At absolute zero, pure silicon

    1. conducts like a metal
    2. has equal numbers of electrons and holes, each very large
    3. has only holes
    4. behaves as an insulator
    Show answer

    Answer: D. At 0 K there is no thermal energy to break bonds, so the conduction band is empty and the valence band is full: no carriers, so silicon behaves as an insulator.

  4. 4. In an electric field, holes in a semiconductor drift

    1. towards the negative potential
    2. towards the positive potential
    3. at right angles to the field
    4. nowhere, because they are fixed
    Show answer

    Answer: A. Holes behave as positive charges, so they move along the field, towards the region of negative potential. Electrons drift the opposite way.

  5. 5. Assertion (A): The resistance of a pure semiconductor decreases as its temperature rises. Reason (R): Higher temperature breaks more covalent bonds and creates more electron-hole pairs.

    1. Both A and R are true, and R is the correct explanation of A
    2. Both A and R are true, but R is not the correct explanation of A
    3. A is true, but R is false
    4. A is false, but R is true
    Show answer

    Answer: A. Both are true. More carriers means higher conductivity and lower resistance. This explains A, so R is the correct explanation. (Metals behave the opposite way.)

Privacy · Terms · Refunds · Delivery