- Foundation
- About 24 min
- 5 practice questions
Extrinsic semiconductors: n-type and p-type doping
Explain doping with pentavalent and trivalent impurities, identify majority and minority carriers, draw donor and acceptor levels, and use nₑnₕ = nᵢ² to find carrier concentrations.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain why and how semiconductors are doped.
- Describe n-type and p-type semiconductors and their majority and minority carriers.
- Show donor and acceptor energy levels on a band diagram.
- Use nₑnₕ = nᵢ² to calculate carrier concentrations.
Pure silicon has far too few carriers at room temperature to build useful devices. Adding a tiny, controlled amount of a suitable impurity, just a few parts per million, raises the conductivity enormously. This deliberate addition is doping, the impurity atoms are dopants, and the result is an extrinsic (impurity, doped) semiconductor.
Choosing a dopant
The dopant must not distort the crystal: it simply replaces a few of the original atoms. For this, the dopant atom must be about the same size as Si or Ge. Since Si and Ge are in group 14 (valency 4), dopants are taken from the neighbouring groups:
- Pentavalent (valency 5): arsenic (As), antimony (Sb), phosphorus (P).
- Trivalent (valency 3): indium (In), boron (B), aluminium (Al).
n-type semiconductor
A pentavalent atom replaces a silicon atom. Four of its five valence electrons form bonds with the four silicon neighbours. The fifth electron is only very weakly held, because it sees the four bonding electrons as part of the atom's core. Only about 0.01 eV (in Ge) or 0.05 eV (in Si) frees it, compared with about 0.7 eV or 1.1 eV to break a bond. So at room temperature practically every dopant gives up its extra electron. The dopant donates an electron and is called a donor; it becomes a fixed positive ion.
Electrons now come from the donors and from broken bonds, while holes come only from broken bonds. The extra electrons also recombine with holes faster, reducing the hole count further. So electrons are the majority carriers and holes the minority carriers: nₑ ≫ nₕ. Such a material is n-type (n for negative carriers). The number of donated electrons depends on the doping level, not on temperature, while the number of intrinsic pairs rises only weakly with temperature.
p-type semiconductor
A trivalent atom replaces a silicon atom. It can bond with only three neighbours; the bond to the fourth has a vacancy, a hole. An electron from a neighbouring bond can jump in, moving the hole away and leaving the dopant as a fixed negative ion. The dopant accepts an electron and is called an acceptor. Each acceptor provides one hole. Now holes are the majority carriers and electrons the minority carriers: nₕ ≫ nₑ. Such a material is p-type.
n-type and p-type semiconductors
-
n-type
- Dopant: pentavalent (As, Sb, P), a donor
- Majority carriers: electrons
- Minority carriers: holes
- Fixed ions: positive donor ions
- Donor level E_D just below E_C
-
p-type
- Dopant: trivalent (In, B, Al), an acceptor
- Majority carriers: holes
- Minority carriers: electrons
- Fixed ions: negative acceptor ions
- Acceptor level E_A just above E_V
Either type remains electrically neutral overall: every extra mobile carrier is balanced by an oppositely charged fixed ion core. Doping also helps reduce the minority carriers: with so many majority carriers around, thermally created minority carriers are more likely to meet one and recombine.
Energy band picture
Doping adds new energy levels inside the gap. In n-type Si a donor level E_D lies just below the bottom of the conduction band, so its electrons jump up with very little energy; at room temperature most donors are ionised, and the conduction band electrons come mainly from donors. In p-type Si an acceptor level E_A lies just above the top of the valence band; valence electrons easily jump up to it, leaving holes in the valence band. (Electrons rise and holes sink when they gain energy.)
In thermal equilibrium: nₑ × nₕ = nᵢ². n-type: nₑ ≈ N_D (donor concentration), nₕ = nᵢ²/N_D. p-type: nₕ ≈ N_A, nₑ = nᵢ²/N_A.
Worked example 1: boron-doped silicon
Silicon (5 × 10²⁸ atoms m⁻³, nᵢ = 1.5 × 10¹⁶ m⁻³) is doped with 2 ppm of boron. Acceptors: N_A = 2 × 10⁻⁶ × 5 × 10²⁸ = 1 × 10²³ m⁻³, so nₕ ≈ 1 × 10²³ m⁻³ (intrinsic holes are negligible). Electrons: nₑ = nᵢ²/nₕ = (1.5 × 10¹⁶)²/10²³ = 2.25 × 10³²/10²³ = 2.25 × 10⁹ m⁻³. Holes outnumber electrons by about 4 × 10¹³: strongly p-type.
Worked example 2: how much doping helps
In the sample above, holes went from 1.5 × 10¹⁶ m⁻³ (pure) to 1 × 10²³ m⁻³, about 7 million times more carriers, even though only two atoms in a million were replaced. Doping lets engineers set the conductivity precisely.
Worked example 3: identifying the type
A sample has nₑ = 4 × 10²⁰ m⁻³ and nₕ = 5 × 10¹¹ m⁻³. Then nₑnₕ = 2 × 10³² m⁻⁶, so nᵢ = √(2 × 10³²) ≈ 1.4 × 10¹⁶ m⁻³ (made-up but realistic values). Since nₑ ≫ nₕ, it is n-type, doped with a pentavalent element.
Key takeaways
- Doping with a few ppm of impurity multiplies conductivity many times.
- Pentavalent donors give n-type (electrons majority); trivalent acceptors give p-type (holes majority).
- Doped semiconductors stay electrically neutral.
- nₑnₕ = nᵢ² links majority and minority carrier numbers.
Check your understanding
-
1. Silicon doped with antimony is
- p-type, with holes as majority carriers
- n-type, with electrons as majority carriers
- intrinsic
- an insulator
Show answer
Answer: B. Antimony is pentavalent. Its fifth electron is easily freed, so the dopant is a donor and the material is n-type with electrons as majority carriers.
-
2. In a p-type semiconductor, the majority carriers and the dopants are
- electrons, pentavalent
- holes, pentavalent
- electrons, trivalent
- holes, trivalent
Show answer
Answer: D. Trivalent acceptors such as boron or indium leave one bond short of an electron, creating holes. So holes are the majority carriers and the dopants are trivalent.
-
3. Pure silicon has nᵢ = 1.5 × 10¹⁶ m⁻³. It is doped so that the hole concentration becomes 4.5 × 10²² m⁻³. The electron concentration is
- 5.0 × 10⁹ m⁻³
- 1.5 × 10¹⁶ m⁻³
- 4.5 × 10²² m⁻³
- 3.0 × 10⁶ m⁻³
Show answer
Answer: A. nₑ = nᵢ²/nₕ = (1.5 × 10¹⁶)²/(4.5 × 10²²) = 2.25 × 10³²/4.5 × 10²² = 5.0 × 10⁹ m⁻³.
-
4. Why must a dopant atom be nearly the same size as a silicon atom?
- So that it has the same valency
- So that it can fit into the lattice without distorting the crystal
- So that it can melt with silicon
- So that it increases the band gap
Show answer
Answer: B. The dopant replaces a silicon atom at a lattice site. If its size were very different, it would distort the crystal. Its valency, in fact, must be different (3 or 5).
-
5. Assertion (A): An n-type semiconductor carries a net negative charge. Reason (R): In an n-type semiconductor, electrons are the majority carriers.
- Both A and R are true, and R is the correct explanation of A
- Both A and R are true, but R is not the correct explanation of A
- A is true, but R is false
- A is false, but R is true
Show answer
Answer: D. R is true, but A is false: an n-type semiconductor is electrically neutral. Each extra free electron is balanced by the fixed positive charge of the donor ion it came from.
Sign in to keep track of the lessons you finish.