- Foundation
- About 15 min
- 5 practice questions
Circuit diagrams and symbols
Use standard symbols for a cell, battery, lamp, LED, switch and wire to draw and read circuit diagrams, including the diagram of a torch.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the standard symbols for common circuit components.
- Draw a circuit diagram for a simple torch.
- Read a circuit diagram to predict whether a lamp or LED will glow.
Drawing every cell, lamp and wire as it really looks takes a long time and can be confusing. Electricians and engineers use simple symbols instead. A drawing of a circuit made with symbols is called a circuit diagram. Because the symbols are agreed internationally, anyone in any country can read the same diagram.
The symbols
| Component | How its symbol is drawn | What to remember |
|---|---|---|
| Electric cell | Two parallel lines: one long and thin, one short and thick | Long line = positive (+), short line = negative (−) |
| Battery | Two or more cell symbols joined in a row | Long line of one cell next to the short line of the next |
| Electric lamp | A circle with a cross inside, or a small coil inside a circle | Shows a device that gives light |
| LED | A triangle pointing at a short bar, with two small arrows pointing outwards | Triangle points the way current can flow; arrows show light coming out |
| Switch ON | A line with a small lever lying flat and closing the gap | Closed circuit |
| Switch OFF | The same lever tilted up, leaving a gap | Open circuit |
| Wire | A straight line | Joins components |
In the symbol for a cell, the longer line is the positive terminal and the shorter line is the negative terminal.
International bodies such as the International Electrotechnical Commission (IEC) publish standard symbols. Using the same symbols everywhere lets engineers from different countries and industries understand one another's designs.
Worked example 1: the torch as a circuit diagram
A torch has two cells, a switch and an incandescent lamp, all in one loop. Draw its diagram in words. Working:
- Draw two cell symbols side by side to make a battery, with the long line of one facing the short line of the other.
- From the long line (+) end of the battery, draw a wire to a switch symbol.
- From the switch, draw a wire to the lamp symbol.
- From the lamp, draw a wire back to the short line (−) end of the battery, closing the loop.
- Draw the switch closed for 'torch ON' or open for 'torch OFF'.
Torch circuit, in the order current travels
- Battery (+) Two cells joined + to −.
- Switch ON closes the gap.
- Lamp Filament glows.
- Battery (−) Back to the battery to complete the loop.
Then back to step 1: Battery (+)
Reading a circuit diagram
To predict whether a lamp glows, trace the path with your finger from the + of the battery. Ask: is there an open switch in the way? Is every component joined to the next? Does the path return to the − of the battery? For an LED, also check that its triangle points in the direction of current, that is, from the + side towards the − side.
Worked example 2: four circuits to check
| Circuit | What the diagram shows | Glows? |
|---|---|---|
| P | Cell, closed switch, lamp, all in one loop | Yes |
| Q | Cell, open switch, lamp in one loop | No: the switch leaves a gap |
| R | Battery, closed switch, LED with its triangle pointing from the + side towards the − side | Yes |
| S | Battery, closed switch, LED with its triangle pointing from the − side towards the + side | No: the LED is reversed |
Working: P has a complete path. Q is broken by the open switch. In R the LED points the way current flows, so current passes. In S the LED points against the current, so it blocks it. Reading symbols carefully lets you find faults before you build anything.
Why diagrams help
- They are quick to draw and easy to read.
- The same symbols are understood worldwide.
- Faults, such as an open switch or a reversed LED, are easy to spot.
- They show only what matters for the current: which parts are joined to which.
Key takeaways: a circuit diagram represents a circuit using symbols. In a cell symbol the long line is + and the short line is −; a battery is cells drawn in a row. The LED symbol's triangle shows the one direction current can pass, and its arrows show light. A switch symbol shows a closed or open gap. Trace a diagram from + back to − to predict whether a device will work.
Check your understanding
-
1. In the circuit symbol for an electric cell, which line stands for the positive terminal?
- The longer line
- The shorter line
- Both lines equally
- Neither; the symbol has no terminals
Show answer
Answer: A. In a cell symbol, the long thin line is the positive terminal and the short thick line is the negative terminal.
-
2. What does the triangle in the LED symbol show?
- The colour of the light
- The direction in which current can flow through the LED
- That the LED is broken
- The length of the legs
Show answer
Answer: B. The triangle points in the one direction current can pass through the LED; the two small arrows show that it gives out light.
-
3. A drawing of a circuit made using standard symbols is called a:
- Circuit diagram
- Circuit map
- Electric picture
- Wiring sketch
Show answer
Answer: A. A representation of an electric circuit using symbols is called a circuit diagram.
-
4. A circuit diagram shows a battery, an open switch and a lamp in one loop. What will happen?
- The lamp will glow brightly
- The lamp will glow dimly
- The battery will become a switch
- The lamp will not glow because there is a gap in the circuit
Show answer
Answer: D. An open switch breaks the circuit, so there is no complete path and no current.
-
5. Why are internationally agreed symbols useful?
- They make cells last longer
- They make lamps brighter
- People from different countries can read the same circuit diagram
- They change the direction of current
Show answer
Answer: C. Standard symbols mean that a diagram drawn anywhere can be understood by engineers and students everywhere.
Sign in to keep track of the lessons you finish.