• Foundation
  • About 15 min
  • 5 practice questions

The electric circuit and the switch

Explain what makes a complete electric circuit, state the direction of current, and describe how a switch opens and closes a circuit.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why a lamp glows only in a complete (closed) circuit.
  • State the direction of electric current in a circuit.
  • Describe how a simple switch works and what ON and OFF mean.

A cell and a lamp alone do not make light. The lamp glows only when the parts are joined in a particular way. Finding that way is the key idea of this chapter: the electric circuit.

A complete path

Connect one terminal of the lamp to one terminal of the cell with a wire, and the other terminal of the lamp to the other terminal of the cell with another wire. The lamp glows. This arrangement forms an electric circuit: a complete path for electric current to flow from the cell, through the lamp, and back to the cell. If there is any gap, or if both wires go to the same terminal, there is no complete path and the lamp does not glow.

A closed circuit

  1. Positive terminal of the cell Current leaves the cell here.
  2. Wire Carries current to the lamp.
  3. Lamp Current passes through the filament, which glows.
  4. Wire Carries current back.
  5. Negative terminal of the cell Current returns to the cell; the path is complete.

Then back to step 1: Positive terminal of the cell

A lamp glows only when it is part of a closed circuit: a complete path from one terminal of the cell, through the lamp, to the other terminal.

By convention, the direction of current in a circuit is taken to be from the positive terminal to the negative terminal of the cell, through the outside circuit. For an incandescent lamp it does not matter which of its terminals faces + or −; it glows whenever the circuit is complete. For an LED it does matter, as you saw in the last lesson.

Worked example 1: which arrangement works?

Predicting before testing
ArrangementPath complete?Lamp glows?
Wire from + of cell to metal tip; wire from − of cell to metal caseYesYes
Both wires from the lamp joined to the + terminal onlyNoNo
Wire from + to the tip; − terminal left unconnectedNoNo
Both wires touching the metal case onlyNo (current does not pass through the filament)No

Working: ask two questions. Does the path leave one terminal of the cell and return to the other terminal? Does it pass through the filament, by entering at one lamp terminal and leaving at the other? Only the first arrangement answers yes to both.

The switch

We do not want to connect and disconnect wires every time we need light. A switch does this job. You can make one from a piece of cardboard, two drawing pins and a safety pin (or paper clip): push one drawing pin through the ring of the safety pin so it can swing, fix the second drawing pin where the free end can touch it, and connect a wire to each drawing pin.

Switch positions

  • ON (closed circuit)
    • The safety pin touches both drawing pins
    • The gap is closed
    • Current flows and the lamp glows
  • OFF (open circuit)
    • The safety pin does not touch the second pin
    • There is an air gap
    • No current; the lamp does not glow

A switch is a simple device that completes or breaks a circuit. It can be placed anywhere in the circuit: before the lamp, after the lamp, or next to the cell; a single gap anywhere stops the current everywhere in a simple circuit. The switches on your walls at home work on the same idea, though they are built differently and sealed for safety. A switch is not a source of electricity; the cell is the source.

Worked example 2: a circuit with two lamps and two switches

A cell, a red switch, a lamp, a green switch and a second lamp are all joined one after another in a single loop. Which lamps glow when (a) both switches are ON, (b) the red switch is ON and the green switch is OFF? Working: there is only one path. (a) With both switches closed, the path is complete, so both lamps glow. (b) The open green switch makes a gap in the only path, so neither lamp glows, even though the red switch is closed. In a single-loop circuit, every switch must be ON for current to flow.

Key takeaways: an electric circuit is a complete path from one terminal of a cell, through the device, to the other terminal. Current is taken to flow from + to − in the outside circuit. A switch completes the circuit when ON (closed) and breaks it when OFF (open), and it can be placed anywhere in the circuit. The cell, not the switch, is the source of electricity.

Check your understanding

  1. 1. When does a lamp in a circuit glow?

    1. When only one wire joins the lamp to the cell
    2. When there is a complete path from one terminal of the cell, through the lamp, to the other terminal
    3. When both lamp wires go to the positive terminal
    4. Whenever a cell is placed near the lamp
    Show answer

    Answer: B. Current flows only through a complete (closed) circuit that passes through the lamp and returns to the other terminal of the cell.

  2. 2. In which direction is electric current taken to flow in the outside circuit?

    1. From the negative terminal to the positive terminal
    2. From the lamp to the switch only
    3. It has no direction
    4. From the positive terminal to the negative terminal of the cell
    Show answer

    Answer: D. By convention, current in the outside circuit is taken to flow from the positive to the negative terminal of the cell.

  3. 3. Aman says, 'When I press the switch, the switch makes the electricity that lights the bulb.' What is wrong with his idea?

    1. Nothing; switches produce electricity
    2. Bulbs make their own electricity
    3. Wires store electricity until the switch releases it
    4. The cell or battery is the source; the switch only closes or opens the path
    Show answer

    Answer: D. A switch is not a source of electricity. Pressing it closes the gap so that current from the cell can flow round the circuit.

  4. 4. A cell, a switch and a lamp are joined in one loop. The switch is OFF. What is the state of the circuit?

    1. Closed, so the lamp glows
    2. Open, so the lamp does not glow
    3. Closed, but the lamp glows dimly
    4. Open, but the lamp still glows
    Show answer

    Answer: B. With the switch OFF there is a gap, so the circuit is open and no current flows.

  5. 5. Two lamps X and Y and two switches P and Q are all in one single loop with a cell. P is OFF and Q is ON. Which lamps glow?

    1. Both lamps
    2. Only the lamp next to switch Q
    3. Neither lamp
    4. Only the lamp next to switch P
    Show answer

    Answer: C. In a single loop there is only one path. Switch P being OFF makes a gap in it, so no current flows anywhere and neither lamp glows.

Sign in to keep track of the lessons you finish.

Next lesson → Circuit diagrams and symbols

Privacy · Terms · Refunds · Delivery