• Foundation
  • About 14 min
  • 5 practice questions

Electric lamps: the incandescent lamp and the LED

Describe the parts of an incandescent torch lamp and of an LED, identify their terminals, and explain why a fused lamp does not glow and why an LED works only one way round.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Name the parts of an incandescent lamp and say which part glows.
  • Identify the positive and negative terminals of an LED.
  • Explain what a 'fused' lamp is and why an LED must be connected the right way round.

The lamp is the part of a torch that turns electrical energy into light. Torches use one of two kinds of lamp: the older incandescent lamp, with a glowing wire, and the newer LED. They look different inside and they behave differently in a circuit.

The incandescent lamp

Look at a small torch bulb. Inside the glass there is a very thin coiled wire called the filament. When the torch is switched on, the filament becomes very hot and glows, giving light. The filament is held up by two thicker wires. One thick wire connects to the metal case at the side of the base; the other connects to the metal tip at the centre of the base. The case and the tip are the lamp's two terminals, and an insulating material keeps them from touching each other.

Parts of an incandescent torch lamp

  • Glass bulb
    • Protects the filament
  • Filament
    • Very thin wire
    • Gets hot and glows
  • Two thick wires
    • Support the filament
    • Join it to the terminals
  • Terminals
    • Metal case at the side of the base
    • Metal tip at the centre of the base
  • Insulator
    • Keeps the two terminals apart

Sometimes a lamp does not glow even in a correct circuit. We then say it has fused. Usually the filament is broken, so there is a gap and current cannot pass through it.

The LED

LED stands for Light Emitting Diode. Many modern torches, bulbs and displays use LEDs. An LED has no filament. It has two wires (legs) of different lengths. The longer leg is the positive terminal and the shorter leg is the negative terminal. An LED lets current pass through it in one direction only, so it glows only when its longer leg is connected towards the positive terminal of the battery and its shorter leg towards the negative terminal.

Incandescent lamp versus LED

  • Incandescent lamp
    • Has a filament that gets hot and glows
    • Terminals: metal case and metal tip
    • Glows whichever way it is connected
    • Stops working if the filament breaks
  • LED
    • No filament
    • Longer leg +, shorter leg −
    • Glows only when connected the right way
    • Comes in many colours

An LED lets current pass in one direction only: longer leg to the + side of the battery, shorter leg to the − side.

Worked example 1: testing an LED both ways

Tara connects a red LED to a battery of two cells. First, the longer leg goes to the + wire and the shorter leg to the − wire: the LED glows. Then she swaps the wires: it does not glow. Is the LED broken? Working: no. An LED conducts in only one direction. In the second case its longer leg was on the − side, so current could not pass. Swapping back makes it glow again, which proves it is working.

Worked example 2: why is the torch dark?

Finding faults in a torch
CheckPossible problemHow to test
CellsCells used up, or placed + to + or − to −Try new cells; check each is placed + to −
Lamp (incandescent)Fused: broken filamentLook for a broken wire inside the bulb; try a lamp that works
Lamp (LED)Connected the wrong way roundSwap the connections and test again
ConnectionsA loose contact or a gapPress the contacts firmly; check the spring

Working: a torch that does not light has a break somewhere in the path for current, or a part that will not let current through. Check one thing at a time, changing only that part, so you know exactly which part was faulty. This is the fair-test idea applied to repair.

Key takeaways: in an incandescent lamp, current makes a thin filament hot enough to glow; its terminals are the metal case and the metal tip, and a broken filament means a fused lamp. An LED has no filament; its longer leg is positive and its shorter leg negative, and it glows only when connected the right way round.

Check your understanding

  1. 1. Which part of an incandescent lamp glows when current passes through it?

    1. The filament
    2. The glass bulb
    3. The metal case
    4. The insulator
    Show answer

    Answer: A. The filament is a very thin wire that becomes very hot and glows when current passes through it.

  2. 2. The two terminals of an incandescent torch lamp are:

    1. The glass bulb and the filament
    2. The two ends of the filament inside the glass only
    3. The longer and shorter legs
    4. The metal case and the metal tip at the base
    Show answer

    Answer: D. One thick wire joins the filament to the metal case, the other to the metal tip at the centre of the base. These are the lamp's two terminals.

  3. 3. An LED does not glow when connected to a working battery. Which is the most likely reason?

    1. Its filament is broken
    2. Its longer leg is connected to the negative side of the battery
    3. LEDs never glow with batteries
    4. The battery has too many terminals
    Show answer

    Answer: B. LEDs have no filament. They pass current in only one direction, so if the longer (positive) leg is joined to the negative side, the LED will not glow.

  4. 4. What does LED stand for?

    1. Light Emitting Diode
    2. Long Electric Device
    3. Light Energy Detector
    4. Low Electric Diode
    Show answer

    Answer: A. LED stands for Light Emitting Diode.

  5. 5. A lamp is said to be 'fused'. What has usually happened?

    1. It has become an LED
    2. Its glass has turned blue
    3. Its filament has broken, leaving a gap
    4. Its terminals have been joined by plastic
    Show answer

    Answer: C. A fused lamp usually has a broken filament. The gap stops current from flowing, so the lamp does not glow.

Sign in to keep track of the lessons you finish.

Next lesson → The electric circuit and the switch

Privacy · Terms · Refunds · Delivery