- Foundation
- About 15 min
- 5 practice questions
Counting in groups and the Roman numerals
Describe how counting in groups (of 2, 5 or 10) made numbers easier to show, and read, write, add and compare Roman numerals using their landmark numbers.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how counting in groups of a fixed size improves on tally marks.
- Read and write Roman numerals using the landmark numbers I, V, X, L, C, D and M.
- Add Roman numerals by regrouping, and explain why multiplying with them is hard.
Tally marks work, but a long row of marks is slow to read. People in many places found a better idea: count in groups of a fixed size and give the group a name or symbol of its own.
Counting in twos
The Gumulgal, an indigenous people of Australia, had just two basic number words, urapon (1) and ukasar (2). Other numbers were built from them: 3 was ukasar-urapon (2 + 1), 4 was ukasar-ukasar (2 + 2), 5 was ukasar-ukasar-urapon and 6 was ukasar-ukasar-ukasar. Anything larger was simply called "many". Remarkably, groups living very far apart, in South America and southern Africa, had number words built in the same way, which has made historians wonder whether they share distant common ancestors.
Worked example 1: arithmetic in twos
Extend the system and add ukasar-ukasar-urapon (5) and ukasar-urapon (3). Put all the parts together: three ukasars and two urapons. Two urapons make one more ukasar, so the sum is four ukasars, ukasar-ukasar-ukasar-ukasar, which is 8. Doubling ukasar-urapon (3) gives two ukasars and two urapons, that is three ukasars, which is 6.
Why groups of five?
Try glancing at a few dots and saying how many there are without counting. Most people can do this instantly for up to about four objects; at five or more they start counting. This limit may be why people bundled tally marks in fives and why many systems used group sizes such as 2, 5, 10 or 20 (the last two match our fingers and toes). Counting with only one group size still becomes clumsy for big numbers: 1345 in fives alone would need 269 fives.
The Roman numerals
The Roman system, used in Europe for many centuries, groups by a sequence of sizes. Each number that gets its own symbol we call a landmark number.
| Symbol | I | V | X | L | C | D | M |
|---|---|---|---|---|---|---|---|
| Value | 1 | 5 | 10 | 50 | 100 | 500 | 1000 |
To write a number, take as many of the largest landmark as possible, then the next, and so on, and write the symbols from largest to smallest. A smaller symbol written before a larger one is subtracted: IV = 4, IX = 9, XL = 40, XC = 90, CD = 400, CM = 900. (Older Roman writing was not always consistent: 4 also appears as IIII.)
Writing a number in Roman numerals
- Largest landmark first Take as many M (1000) as fit, then D, C, L, X, V, I.
- Use subtraction for 4s and 9s Write IV, IX, XL, XC, CD, CM instead of four repeats.
- Write from largest to smallest Join the symbols left to right.
Worked example 2: converting
- 1874 = 1000 + 500 + 100 + 100 + 100 + 50 + 10 + 10 + 4 = M D CCC L XX IV, written MDCCCLXXIV.
- 649 = 500 + 100 + 40 + 9 = DCXLIX.
- Reading MMXIX: MM = 2000, X = 10, IX = 9, so it is 2019.
Worked example 3: adding without converting
Add CCXVI and CCLXVIII. Collect the symbols: C C C C (four Cs), L, X X (two Xs), V V (two Vs), I I I I (four Is). Regroup from the smallest: two Vs make an X, so now there are three Xs; five Cs would make a D, but we have only four. The sum is CCCC L XXX IIII, which in modern style is CDLXXXIV = 484. Check: 216 + 268 = 484. Regrouping is fiddly because the group sizes keep changing: 5 Is make a V, but 2 Vs make an X.
Multiplication is much harder. The product of two landmark numbers is often not a landmark: V × L = 250 = CCL needs three symbols. So people using Roman numerals did their sums on a counting board (an abacus) and only trained people could calculate easily.
Roman numerals group a number by landmark numbers I = 1, V = 5, X = 10, L = 50, C = 100, D = 500, M = 1000. A smaller symbol before a larger one is subtracted.
Key takeaways: counting in groups of one size, as the Gumulgal did with twos, beats a plain tally. People can see small groups (up to about four) at a glance, which may explain grouping by five. Roman numerals group by a sequence of landmark numbers, which is far more compact, but their group sizes are irregular and products of landmarks are not landmarks, so calculating with them is hard.
Check your understanding
-
1. In the Gumulgal number words, urapon = 1 and ukasar = 2. What number is ukasar-ukasar-urapon?
- 3
- 4
- 5
- 6
Show answer
Answer: C. Add the parts: ukasar + ukasar + urapon = 2 + 2 + 1 = 5.
-
2. How is 2024 written in Roman numerals?
- MMXXVI
- MMXXIV
- MMXIV
- MCMXXIV
Show answer
Answer: B. 2024 = 1000 + 1000 + 10 + 10 + 4 = MM XX IV, so MMXXIV. MMXXVI is 2026, MMXIV is 2014 and MCMXXIV is 1924.
-
3. What number does XCIV stand for?
- 116
- 96
- 114
- 94
Show answer
Answer: D. XC: X before C means 100 − 10 = 90. IV: I before V means 5 − 1 = 4. So XCIV = 90 + 4 = 94. Reading every symbol as added (10 + 100 + 1 + 5) gives the wrong 116.
-
4. Why is multiplication difficult with Roman numerals?
- Roman numerals have no symbol for 1
- Roman numerals cannot be added
- The product of two landmark numbers is often not a landmark number
- Roman numerals use place value
Show answer
Answer: C. For example V × L = 5 × 50 = 250, which has no single symbol and must be written CCL. Because products of landmarks are not landmarks, there is no simple rule for multiplying, unlike in a system with a base.
-
5. Up to about how many objects can most people recognise at a glance, without counting?
- About 4
- About 10
- About 20
- About 50
Show answer
Answer: A. Most people can see the number of up to about four objects instantly; at five or more they need to count. This limit may be one reason tally marks were bundled in fives.
Sign in to keep track of the lessons you finish.