- Foundation
- About 15 min
- 5 practice questions
The idea of a base: Egyptian numerals and base-n systems
Write numbers in the Egyptian system, define a base-n number system and find its landmark numbers, and explain why a base makes adding and multiplying easier.
If something looks wrong, please tell us.
By the end of this lesson you can
- Write and read numbers in the Egyptian system, whose landmark numbers are powers of 10.
- Define a base-n number system and find the landmark numbers of any base, such as base 5 or base 7.
- Explain why having a base makes addition and multiplication easier, and what drawback remained.
Roman numerals use landmarks 1, 5, 10, 50, 100, ... where the jump from one landmark to the next is sometimes × 5 and sometimes × 2. The ancient Egyptians, around 5000 years ago, used a cleaner rule: every landmark number is 10 times the one before.
Egyptian numerals
Start with 1. Ten 1s make the next landmark, 10. Ten 10s make 100, ten 100s make 1000, and so on. So the landmarks are the powers of 10, and each had a picture-symbol.
| Landmark | 1 | 10 | 100 | 1000 | 10,000 | 1,00,000 | 10,00,000 |
|---|---|---|---|---|---|---|---|
| Picture | a stroke | a heel-bone arch | a coil of rope | a lotus | a finger | a tadpole | a kneeling figure |
To write a number, repeat each symbol as many times as that landmark is needed, starting with the largest. For example 2316 = 1000 + 1000 + 100 + 100 + 100 + 10 + 1 + 1 + 1 + 1 + 1 + 1 is two lotuses, three coils, one arch and six strokes. No symbol is ever needed 10 or more times, because ten of them would be grouped into the next landmark.
Base-n number systems
Nothing forces the grouping size to be 10. Group in fives instead: the landmarks are 1, then 5 × 1 = 5, then 5 × 5 = 25, then 125, 625, ... These are the powers of 5: 5⁰, 5¹, 5², 5³, 5⁴. A number system whose first landmark is 1 and where each landmark is a fixed number n times the previous one is called a base-n number system. The Egyptian system is base 10, also called a decimal system.
In a base-n system the landmark numbers are the powers of n: 1, n, n², n³, ... Each landmark is used at most n − 1 times, because n of them make the next landmark.
Landmark numbers of different bases
-
Base 2
- 1, 2, 4, 8, 16, 32, ...
-
Base 5
- 1, 5, 25, 125, 625, ...
-
Base 7
- 1, 7, 49, 343, 2401, ...
-
Base 10
- 1, 10, 100, 1000, 10,000, ...
Worked example 1: 87 in base 5
The landmarks of base 5 are 1, 5, 25, 125, ... The largest not more than 87 is 25. 87 ÷ 25 = 3 remainder 12, so three 25s. Then 12 ÷ 5 = 2 remainder 2, so two 5s and two 1s. So 87 = 3 × 25 + 2 × 5 + 2 × 1. Check: 75 + 10 + 2 = 87. In a base-5 picture system you would draw three 25-symbols, two 5-symbols and two 1-symbols.
Why a base helps
Adding is simple regrouping by the same size every time. Add two Egyptian numbers: 3 lotuses, 8 coils, 7 strokes (3807) and 6 coils, 5 arches, 5 strokes (655). Collect: 3 lotuses, 14 coils, 5 arches, 12 strokes. Ten strokes make an arch: 6 arches, 2 strokes. Ten coils make a lotus: 4 lotuses, 4 coils. Sum: 4 lotuses, 4 coils, 6 arches, 2 strokes = 4462. Check: 3807 + 655 = 4462. Notice this is exactly the carrying we do in column addition.
Multiplying is easier because the product of two landmarks is always another landmark: 10 × 100 = 1000, and in base 5, 25 × 125 = 3125 = 5⁵, since powers multiply by adding exponents. Multiplying any number by 10 in the Egyptian system just replaces each symbol by the next landmark's symbol; in base 5, multiplying by 5 does the same.
Worked example 2: multiplying by a landmark
Multiply 2 coils, 1 arch, 3 strokes (213) by an arch (10). By the distributive property each part is multiplied by 10: each coil becomes a lotus, the arch becomes a coil, each stroke becomes an arch. Result: 2 lotuses, 1 coil, 3 arches = 2130. The same idea was used on the abacus, a counting board with lines for 1, 10, 100, 1000, where counters were placed on each line and ten counters on a line were exchanged for one on the next.
The remaining problem
The Egyptian system needed a new symbol for every new power of 10. To write ever larger numbers you would need an unending supply of new symbols, the same problem that number systems were meant to solve. The next big idea, place value, fixes this.
Key takeaways: the Egyptian system has landmarks that are powers of 10, each with its own symbol used at most 9 times. A base-n system has landmarks 1, n, n², n³, ... Regrouping by the same size makes addition easy, and products of landmarks are landmarks, which makes multiplication easy. Its weakness is needing new symbols for ever larger landmarks.
Check your understanding
-
1. What are the first four landmark numbers of a base-7 system?
- 1, 7, 14, 21
- 1, 7, 49, 343
- 7, 14, 49, 98
- 1, 7, 70, 700
Show answer
Answer: B. In base 7 each landmark is 7 times the previous one, starting from 1: 1, 7, 7 × 7 = 49, 49 × 7 = 343. These are 7⁰, 7¹, 7², 7³. Adding 7 each time (1, 7, 14, 21) is not a base system.
-
2. In the base-5 system, how is 87 grouped into landmark numbers?
- 8 fives and 7 ones
- 1 twenty-five, 12 fives and 2 ones
- 3 twenty-fives, 2 fives and 2 ones
- 3 twenty-fives and 12 ones
Show answer
Answer: C. 87 ÷ 25 = 3 remainder 12, and 12 ÷ 5 = 2 remainder 2. So 87 = 3 × 25 + 2 × 5 + 2 = 75 + 10 + 2. In a base-5 system no landmark is used 5 or more times, which rules out 12 fives or 12 ones.
-
3. Why does no Egyptian symbol ever need to appear 10 or more times in a number?
- Egyptian scribes could only draw nine symbols
- The number 10 was considered unlucky
- Every number below 10 had its own symbol
- Ten of any symbol are grouped into one symbol of the next landmark
Show answer
Answer: D. Each landmark is 10 times the previous one, so ten copies of a symbol are always replaced by one copy of the next symbol (for example ten strokes by one arch). This is the same as carrying in base 10.
-
4. What was the main drawback of the Egyptian number system?
- It needed a new symbol for every higher power of 10
- It could not show numbers below 100
- Adding two numbers was impossible
- It had no symbol for 1
Show answer
Answer: A. The system used a separate picture for 1, 10, 100, 1000, ... To write larger and larger numbers, more and more new symbols would be needed without end. Place value later removed this problem.
-
5. In a base-5 system, what happens when you multiply a number by 5?
- Every symbol stays the same
- Every landmark used is replaced by the next landmark
- Every symbol is used five more times
- The number becomes a landmark number
Show answer
Answer: B. Each landmark times 5 is the next landmark (1 × 5 = 5, 5 × 5 = 25, 25 × 5 = 125). By the distributive property each part of the number moves up one landmark, just as multiplying by 10 does in base 10.
Sign in to keep track of the lessons you finish.