• Foundation
  • About 25 min
  • 15 practice questions

Final self-assessment: A Story of Numbers

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions in one sitting, writing down your working where there is a calculation. They mix ideas from all five lessons and are harder than the lesson checks. Only after finishing, check your answers and read every explanation, including the ones you got right.

Final self-assessment

  1. 1. Every cow in herd P is paired with a different cow from herd Q. Afterwards 5 cows of herd Q are left unpaired. What can you conclude?

    1. Herd Q has 5 more cows than herd P
    2. Herd P has 5 more cows than herd Q
    3. Both herds have 5 cows
    4. Nothing, without number names
    Show answer

    Answer: A. In a one-to-one pairing each cow of P used exactly one cow of Q. The 5 unpaired cows are extra, so herd Q has 5 more than herd P. No number names are needed to see this.

  2. 2. A counting system uses a, b, ..., z for 1 to 26, then aa = 27, ab = 28, and so on. What number is az?

    1. 27
    2. 51
    3. 52
    4. 53
    Show answer

    Answer: C. The two-letter names starting with a run aa, ab, ..., az, which is 26 names for 27 to 52. So az = 26 + 26 = 52.

  3. 3. Which method of showing numbers needs as many marks or objects as the number itself?

    1. Roman numerals
    2. Egyptian numerals
    3. Base-60 place value
    4. A plain tally
    Show answer

    Answer: D. A plain tally (or the sticks method) uses one mark for every object counted, so 300 objects need 300 marks. Roman, Egyptian and place value systems group objects, so they need far fewer symbols.

  4. 4. What number does MCMXCIX stand for?

    1. 2099
    2. 1999
    3. 1199
    4. 1989
    Show answer

    Answer: B. M = 1000, CM = 1000 − 100 = 900, XC = 100 − 10 = 90, IX = 10 − 1 = 9. Total = 1000 + 900 + 90 + 9 = 1999.

  5. 5. What is LXXVII + XLVI, written in Roman numerals?

    1. CXXIII
    2. CXIII
    3. CXXXIII
    4. XCXIII
    Show answer

    Answer: A. LXXVII = 50 + 10 + 10 + 5 + 1 + 1 = 77 and XLVI = 40 + 5 + 1 = 46. The sum is 77 + 46 = 123 = 100 + 10 + 10 + 3 = CXXIII.

  6. 6. Using the Gumulgal idea (urapon = 1, ukasar = 2), what is ukasar-ukasar-urapon multiplied by ukasar?

    1. ukasar-ukasar-urapon-urapon
    2. ukasar-ukasar-ukasar-urapon
    3. Five ukasars in a row
    4. Four ukasars and an urapon
    Show answer

    Answer: C. ukasar-ukasar-urapon is 2 + 2 + 1 = 5 and ukasar is 2, so the product is 10. Doubling each part gives four ukasars and two urapons, and two urapons make one more ukasar: five ukasars, which is 5 × 2 = 10.

  7. 7. In base 5, how many 125s, 25s, 5s and 1s make 300?

    1. 2, 1, 5, 0
    2. 1, 7, 0, 0
    3. 3, 0, 0, 0
    4. 2, 2, 0, 0
    Show answer

    Answer: D. 300 ÷ 125 = 2 remainder 50; 50 ÷ 25 = 2 remainder 0. So 300 = 2 × 125 + 2 × 25 + 0 × 5 + 0 × 1, written 2200₅. Options with a count of 5 or 7 are impossible, since in base 5 each landmark is used at most 4 times; 3 × 125 = 375 is too big.

  8. 8. Which statement is true for every number system with a base?

    1. Every landmark number needs its own new symbol forever
    2. The product of any two landmark numbers is another landmark number
    3. Landmark numbers go up by adding the base
    4. There are exactly ten landmark numbers
    Show answer

    Answer: B. The landmarks are powers of the base n, and nᵃ × nᵇ = nᵃ⁺ᵇ is again a power of n. This is what makes multiplication easy. Landmarks grow by multiplying by the base, not by adding it, and there are infinitely many.

  9. 9. In Egyptian numerals you add 8 coils of rope (100s) to 5 more coils. How is the result written?

    1. 1 lotus and 3 coils
    2. 13 coils
    3. 1 lotus and 13 coils
    4. 3 lotuses
    Show answer

    Answer: A. 8 + 5 = 13 coils, that is 13 hundreds = 1300. Ten coils are regrouped as one lotus (1000), leaving 3 coils: 1 lotus and 3 coils. No symbol may appear 10 or more times.

  10. 10. In a base-60 place value system written with our digits, what is the value of (2)(0)(5)?

    1. 125
    2. 205
    3. 7205
    4. 7250
    Show answer

    Answer: C. The places from the right count 1s, 60s and 3600s. (2)(0)(5) = 2 × 3600 + 0 × 60 + 5 × 1 = 7200 + 0 + 5 = 7205. The 0 shows the 60s place is empty.

  11. 11. Time still uses base 60. How many seconds are there in 2 hours 15 minutes 40 seconds?

    1. 2154
    2. 7240
    3. 8100
    4. 8140
    Show answer

    Answer: D. 1 hour = 60 × 60 = 3600 seconds and 1 minute = 60 seconds. Total = 2 × 3600 + 15 × 60 + 40 = 7200 + 900 + 40 = 8140 seconds. This is exactly reading (2)(15)(40) in base 60.

  12. 12. The Mayan landmarks are 1, 20 and 360. How is 1000 made from them?

    1. 2 × 360 + 14 × 20 + 0
    2. 2 × 400 + 10 × 20 + 0
    3. 50 × 20 + 0
    4. 2 × 360 + 7 × 20 + 0
    Show answer

    Answer: A. 1000 ÷ 360 = 2 remainder 280, and 280 ÷ 20 = 14 remainder 0. So 1000 = 2 × 360 + 14 × 20 + 0 = 720 + 280. 400 is not a Mayan landmark, and 50 twenties is not allowed because a place holds at most 19.

  13. 13. What is 100 written in base 2?

    1. 1010100₂
    2. 1100100₂
    3. 1100010₂
    4. 1000100₂
    Show answer

    Answer: B. Places in base 2: 64, 32, 16, 8, 4, 2, 1. 100 = 64 + 32 + 4, so the digits are 1, 1, 0, 0, 1, 0, 0: 1100100₂. The other numerals are 84, 98 and 68.

  14. 14. In the base-8 numeral 2305₈, what is the digit 3 worth in base 10?

    1. 3
    2. 24
    3. 192
    4. 300
    Show answer

    Answer: C. Base-8 places from the right are 1, 8, 64, 512. The 3 is in the third place from the right, the 64s place, so it is worth 3 × 64 = 192.

  15. 15. Which feature lets the Indian number system write every number unambiguously with just ten symbols?

    1. It uses a new symbol for each power of 10
    2. It uses base 60
    3. It shows empty places with blank spaces
    4. Place value with exactly one digit per place, including 0 for an empty place
    Show answer

    Answer: D. Position gives each digit its landmark, so no new symbols are needed, and each place holds exactly one digit, with 0 marking an empty place. That removes the ambiguity of blank spaces seen in the Mesopotamian system.

Revisit the lessons that match any questions you found hard. Questions 1-3: lesson 1 (counting and number systems). Questions 4-6: lesson 2 (grouping and Roman numerals). Questions 7-9: lesson 3 (Egyptian numerals and bases). Questions 10-12: lesson 4 (Mesopotamian, Mayan and Chinese place value). Questions 13-15: lesson 5 (the Indian system and other bases).

Sign in to keep track of the lessons you finish.

Privacy · Terms · Refunds · Delivery