• Foundation
  • About 15 min
  • 5 practice questions

Place value: Mesopotamian, Mayan and Chinese numerals

Read and write numbers in a base-60 place value system, explain why a placeholder for an empty place was needed, and compare the Mayan and Chinese rod numeral systems.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Write numbers in a base-60 place value system like the Mesopotamian one, and read them back.
  • Explain why blank spaces caused confusion and why a placeholder symbol (like our 0) was needed.
  • Describe the Mayan and Chinese rod numeral systems and how they used position.

The Egyptian system needed a new symbol for every power of 10. The brilliant fix was to let the position of a symbol tell which landmark it counts. Then a few symbols are enough for every number. This idea, place value, appeared in several civilisations.

The Mesopotamian base-60 system

In ancient Mesopotamia (in western Asia, much of it in present-day Iraq) people eventually used a base-60 (sexagesimal) system. Its landmarks are 1, 60, 60² = 3600, 60³ = 2,16,000, and so on. We still use their base 60 today: 60 seconds make a minute and 60 minutes make an hour. They wrote the numbers 1 to 59 by repeating a wedge-shaped mark for 1 and another mark for 10. Below we write those amounts with our own digits, in brackets, one bracket per place.

Worked example 1: writing 4000

The largest landmark not more than 4000 is 3600. 4000 − 3600 = 400, and 400 = 6 × 60 + 40. So 4000 = (1) × 3600 + (6) × 60 + (40) × 1. Dropping the landmark names and letting position show them, it is written (1)(6)(40): the rightmost group counts 1s, the next counts 60s, the next counts 3600s.

Worked example 2: reading a numeral

What is (3)(20)(15)? It is 3 × 3600 + 20 × 60 + 15 = 10,800 + 1200 + 15 = 12,015. No group can be 60 or more, because 60 of a landmark make one of the next: for example 70 sixties is 1 × 3600 + 10 × 60.

Writing a number in base 60

  1. Divide by 3600 The quotient is the 3600s place.
  2. Divide the remainder by 60 The quotient is the 60s place.
  3. What is left The final remainder (0 to 59) is the 1s place.
  4. Write by position Write the groups left to right: (3600s)(60s)(1s).

The trouble with blanks

When a place was empty, Mesopotamian scribes left a gap. But gaps are hard to see and to measure. Is a single group of 2 marks the number 2, or 2 × 60 = 120 with an empty 1s place, or 2 × 3600 = 7200? A later improvement was a special placeholder symbol for an empty place in the middle of a number, which is the job our 0 does. Even then it was not used at the end of a number, so some numbers stayed ambiguous.

The Mayan system

The Maya of Central America, who flourished roughly between the 3rd and 10th centuries CE, built a place value system on their own, with a shell-shaped symbol for an empty place. They wrote 1 to 19 with dots (1 each) and bars (5 each), and stacked the places vertically, the 1s at the bottom. Their landmarks were 1, 20, 360 (not 400), 7200, ... probably linked to their calendar. Because 360 is not 20 × 20, it is not a true base-20 system, and it lacks some of a base's advantages for calculating.

Worked example 3: a Mayan number

The bottom level shows 1 bar and 3 dots (5 + 3 = 8 ones); the level above shows 2 dots (2 twenties); the level above that shows 1 dot (one 360). The value is 1 × 360 + 2 × 20 + 8 = 360 + 40 + 8 = 408.

Chinese rod numerals

For calculating, Chinese mathematicians used counting rods, a base-10 place value system used for many centuries. Digits 1 to 9 were made from small rods. To keep neighbouring places apart, the rods alternated between upright forms (called zong, for units, hundreds, ten-thousands) and lying-down forms (heng, for tens, thousands). An empty place was left blank, which was easier to spot than a Mesopotamian gap because the rod digits were of similar size.

Three place value systems

  • Mesopotamian
    • Base 60
    • Landmarks 1, 60, 3600, ...
    • Gaps, later a placeholder in the middle
  • Mayan
    • Mostly base 20
    • Landmarks 1, 20, 360, 7200, ...
    • Shell symbol for an empty place
  • Chinese rods
    • Base 10
    • Upright and lying forms alternate
    • Blank space for an empty place

In a place value system the position of a symbol tells which landmark it counts, so a fixed, small set of symbols can write every number. An empty place needs a placeholder, or numbers become ambiguous.

Key takeaways: place value lets position show the landmark, ending the need for endless new symbols. The Mesopotamians used base 60, which survives in our minutes and seconds. Blank places caused confusion until placeholders were used. The Maya used dots, bars and a shell with landmarks 1, 20, 360; Chinese rod numerals were base 10 with alternating rod directions.

Check your understanding

  1. 1. In a base-60 place value system written with our digits, which numeral stands for 4000?

    1. (1)(6)(40)
    2. (4)(0)(0)
    3. (66)(40)
    4. (1)(40)(6)
    Show answer

    Answer: A. 4000 = 1 × 3600 + 400, and 400 = 6 × 60 + 40. So the places, from 3600s to 60s to 1s, hold 1, 6 and 40: (1)(6)(40). A place can never hold 60 or more, which rules out (66)(40).

  2. 2. Why did a place value system like the Mesopotamian one need a placeholder symbol?

    1. To show negative numbers
    2. To make numbers look larger
    3. Because blank spaces for empty places were easily misread
    4. Because they had no symbol for 10
    Show answer

    Answer: C. An empty place was first shown by a gap. Gaps are hard to see and measure, so the same marks could be read as, for example, 2, 120 or 7200. A placeholder symbol, doing the job of our 0, removes the confusion.

  3. 3. What was the third landmark number of the Mayan system (after 1 and 20)?

    1. 400
    2. 360
    3. 300
    4. 600
    Show answer

    Answer: B. The Mayan landmarks were 1, 20, 360, 7200, ... The third was 360, not 20 × 20 = 400, probably because of their calendar. So it was not a true base-20 system.

  4. 4. A Mayan number has 1 bar and 3 dots on the bottom level and 2 dots on the level above. What is its value?

    1. 28
    2. 208
    3. 10
    4. 48
    Show answer

    Answer: D. The bottom level counts 1s: 1 bar (5) + 3 dots (3) = 8. The level above counts 20s: 2 dots = 2 twenties = 40. Total = 40 + 8 = 48.

  5. 5. Why did Chinese rod numerals alternate between upright and lying-down rod shapes in neighbouring places?

    1. Upright rods meant negative numbers
    2. Lying-down rods were cheaper to make
    3. To make neighbouring places easy to tell apart
    4. Because the system was base 2
    Show answer

    Answer: C. If every place used the same shapes, the rods for 4 and 1 side by side could be read as 41, as 5 or in other ways. Alternating upright (units, hundreds, ...) and lying-down (tens, thousands, ...) forms marks clearly where one place ends and the next begins.

Privacy · Terms · Refunds · Delivery