- Foundation
- About 16 min
- 5 practice questions
The Indian place value system, zero, and other bases
Describe how the Indian (Hindu) numerals with zero work and spread across the world, and convert numbers between base 10 and bases such as 2, 5 and 8.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain how the Indian number system combines base 10, place value and zero as a digit and a number.
- Outline how the Indian numerals travelled to the Arab world and Europe, and why they are called Hindu or Indian numerals.
- Convert numbers between base 10 and other bases such as 2, 5 and 8.
Every idea in this chapter comes together in the number system you use daily. It uses ten digits, 0 to 9, a base of 10, place value, and zero as a digit and as a number. It grew up in India and is now used across the whole world.
How the Indian system works
In 375 the 5 is in the 1s place, the 7 in the 10s place and the 3 in the 100s place: 375 = (3 × 10²) + (7 × 10) + (5 × 1). Each position is a power of 10, each place holds a single digit from 0 to 9, and an empty place is shown by 0. Because of this, every numeral can be read in exactly one way: 305, 35 and 350 are clearly different numbers.
How ideas about writing numbers developed
- Count in groups of one size Gumulgal: urapon, ukasar
- Group by landmark numbers Roman: I, V, X, L, C, D, M
- Use powers of one number The idea of a base: 1, 10, 100, ...
- Let position show the landmark Place value: Mesopotamian, Mayan, Chinese
- Zero as a digit and a number The Indian system
Zero: more than a placeholder
Ancient Indian texts already named numbers by powers of 10 (eka, dasha, shata, sahasra, ... for one, ten, hundred, thousand). The Bakhshali manuscript, an ancient Indian mathematical text, writes numbers with ten digits and shows zero as a dot. Aryabhata (499 CE) did large scientific calculations with this system. In Indian mathematics zero was treated as a number in its own right, not just a gap filler: Brahmagupta (628 CE) set out rules for calculating with zero and negative numbers, such as a number plus 0 is the same number and a number times 0 is 0. These ideas became foundations of algebra.
How the numerals travelled
Indian numerals reached the Arab world by about 800 CE. The Persian mathematician Al-Khwarizmi, after whom the word algorithm is named, wrote a book on calculating with Hindu numerals, and they spread further from there. Around 1200 the Italian mathematician Fibonacci urged Europe to adopt them, though Roman numerals stayed in use there for centuries more. Because Europeans learned them from Arab scholars, they called them "Arabic numerals", while Arab scholars themselves called them "Hindu numerals". Today they are called Hindu numerals, Indian numerals or Hindu-Arabic numerals; here "Hindu" refers to the land and people they came from, not a religion.
The Indian number system is a base-10 place value system with ten digits, including 0, which is both a placeholder and a number. Every number can be written, unambiguously, with just these ten symbols.
Place value in other bases
Base 10 probably comes from our ten fingers, but place value works with any base n, using the digits 0 to n − 1. In base 5 the places are 1, 5, 25, 125, ... and the digits are 0 to 4; in base 2 (binary, used inside computers) the places are 1, 2, 4, 8, 16, ... and the digits are only 0 and 1. We write the base as a small subscript: 142₅ means a base-5 numeral.
Worked example 1: from base 10 to base 5 and base 2
- 47 in base 5: 47 ÷ 25 = 1 remainder 22; 22 ÷ 5 = 4 remainder 2. Digits 1, 4, 2, so 47 = 142₅. Check: 1 × 25 + 4 × 5 + 2 = 25 + 20 + 2 = 47.
- 13 in base 2: 13 = 8 + 4 + 1 = 1 × 8 + 1 × 4 + 0 × 2 + 1 × 1, so 13 = 1101₂.
Worked example 2: back to base 10
- 144₈ = 1 × 64 + 4 × 8 + 4 × 1 = 64 + 32 + 4 = 100.
- 2031₅ = 2 × 125 + 0 × 25 + 3 × 5 + 1 = 250 + 0 + 15 + 1 = 266. The 0 tells us there are no 25s; without it the numeral would be misread.
| Base 10 | Base 2 | Base 5 | Base 8 |
|---|---|---|---|
| 5 | 101₂ | 10₅ | 5₈ |
| 8 | 1000₂ | 13₅ | 10₈ |
| 13 | 1101₂ | 23₅ | 15₈ |
| 20 | 10100₂ | 40₅ | 24₈ |
Key takeaways: the Indian system joins a base of 10, place value, and zero used both as a placeholder and as a number, so every number has one clear numeral. It travelled from India to the Arab world and then to Europe and the whole world. Place value works in any base: the places are powers of the base and the digits run from 0 to one less than the base.
Check your understanding
-
1. How is 47 written in base 5?
- 142₅
- 47₅
- 412₅
- 232₅
Show answer
Answer: A. Base-5 places are 25, 5, 1. 47 ÷ 25 = 1 remainder 22, and 22 ÷ 5 = 4 remainder 2. So the digits are 1, 4, 2: 142₅. Check: 25 + 20 + 2 = 47. The numeral 47₅ is impossible, since base 5 has no digit 7.
-
2. What number in base 10 is 1101₂?
- 1101
- 11
- 13
- 15
Show answer
Answer: C. Base-2 places from the right are 1, 2, 4, 8. 1101₂ = 1 × 8 + 1 × 4 + 0 × 2 + 1 × 1 = 8 + 4 + 0 + 1 = 13.
-
3. Which Indian mathematician set out rules, in 628 CE, for calculating with zero as a number?
- Aryabhata
- Brahmagupta
- Al-Khwarizmi
- Fibonacci
Show answer
Answer: B. Brahmagupta, in 628 CE, gave rules for zero and negative numbers, such as a number plus zero is unchanged. Aryabhata (499 CE) calculated with the place value system; Al-Khwarizmi and Fibonacci helped spread it to the Arab world and Europe.
-
4. Why is the digit 0 essential in our place value system?
- It makes numbers larger
- It is needed only for counting money
- It shows negative numbers
- It marks an empty place so that numbers such as 305 and 35 cannot be confused
Show answer
Answer: D. In 305 the 0 shows there are no tens. Without it the digits 3 and 5 could be read as 35. Zero as a placeholder makes every numeral unambiguous, and in Indian mathematics it was also a number in its own right.
-
5. What is 144₈ in base 10?
- 144
- 100
- 96
- 84
Show answer
Answer: B. Base-8 places from the right are 1, 8, 64. 144₈ = 1 × 64 + 4 × 8 + 4 × 1 = 64 + 32 + 4 = 100.
Sign in to keep track of the lessons you finish.