• Foundation
  • About 14 min
  • 5 practice questions

Environment, pollution and the layers of the atmosphere

Name the four parts of the environment, tell primary from secondary and biodegradable from non-biodegradable pollutants, and express small amounts in parts per million.

If something looks wrong, please tell us.

Environmental chemistry is the study of the chemical substances in air, water and soil: where they come from, how they react and move, and what they do to living things. It matters to every student because the questions it answers are practical ones. Why does a city's air turn brown on a sunny afternoon? Why does a lake full of fertiliser run-off lose its fish? Why does a marble statue slowly dissolve? This first lesson gives you the vocabulary that the rest of the course uses, so read it slowly and make sure each term is clear.

The four parts of the environment

Chemists divide our surroundings into four connected parts. A pollutant released into one part rarely stays there: sulfur dioxide from a chimney enters the air, dissolves in rain, falls into a lake and then soaks into soil. So keep in mind that the four parts constantly exchange matter.

The four parts of the environment
PartWhat it isExample of a pollution problem
AtmosphereThe blanket of air around the EarthSmoke, sulfur dioxide, smog
HydrosphereAll the water: oceans, rivers, lakes, ground waterSewage, fertiliser run-off
LithosphereThe solid outer part: soil and rocksPesticides, plastic waste
BiosphereAll living things and the places they livePoisons building up in food chains

What pollution and a pollutant are

Pollution is an undesirable change in the physical, chemical or biological character of air, water or soil that harms people, animals, plants or materials. The substance that causes the change is called a pollutant. A substance can be harmless in one place and a pollutant in another: ozone high in the sky protects us, but ozone at street level irritates our eyes and lungs.

Pollutants are sorted in two useful ways. First, by how they arise. A primary pollutant is released directly from a source, such as sulfur dioxide from burning coal or carbon monoxide from a vehicle exhaust. A secondary pollutant is not released by anyone; it forms in the air when primary pollutants react with each other or with air, water and sunlight. Ozone and PAN in photochemical smog, and sulfuric acid in acid rain, are secondary pollutants.

Second, by whether nature can break them down. Biodegradable pollutants, such as kitchen waste, sewage and paper, are decomposed by bacteria and other microbes; they cause harm only when there is too much of them at once. Non-biodegradable pollutants, such as the insecticide DDT, many plastics and the heavy metals mercury, lead and cadmium, are broken down extremely slowly or not at all. They stay in the environment and can build up inside living things.

The layers of the atmosphere

The atmosphere is not uniform. The lowest layer, the troposphere, extends roughly 10 km above sea level. It holds most of the air and almost all the water vapour, so clouds, rain and weather happen here, and most of the pollution we breathe is found here. Above it lies the stratosphere, from about 10 km to about 50 km. The stratosphere contains the ozone layer, which absorbs much of the harmful ultraviolet (UV) radiation coming from the Sun. Chemists therefore speak of tropospheric pollution (smog, acid rain, toxic gases) and stratospheric pollution (damage to the ozone layer).

Measuring small amounts: parts per million

Pollutants are usually present in tiny amounts, so we use parts per million (ppm): the number of parts of pollutant in one million parts of the whole. For a mass basis, ppm = (mass of pollutant ÷ mass of sample) × 1,000,000, with both masses in the same unit. For a gas in air, ppm is often by volume: millilitres of gas in one million millilitres of air. For dilute water, 1 litre has a mass of about 1 kg, so 1 milligram per litre is about 1 ppm.

Worked example 1: a pollutant in water

A 1 kg sample of well water contains 0.002 g of lead. Find the lead content in ppm. Both masses must be in grams: 1 kg = 1000 g. ppm = (0.002 ÷ 1000) × 1,000,000 = 0.000002 × 1,000,000 = 2 ppm. Check the shortcut: 0.002 g is 2 mg, and 2 mg in about 1 litre is 2 mg/L, which is 2 ppm. Both routes agree.

Worked example 2: a gas in air

One cubic metre of air contains 9 cm³ of carbon monoxide. Find the concentration in ppm by volume. One cubic metre is 100 cm × 100 cm × 100 cm = 1,000,000 cm³. So 9 cm³ in 1,000,000 cm³ is 9 parts per million, that is 9 ppm. The key step is converting the cubic metre into cubic centimetres so both volumes use the same unit.

Worked example 3: sorting pollutants

Classify each of these: carbon monoxide from a car, ozone formed in city smog, vegetable peel, DDT. Carbon monoxide comes straight out of the exhaust, so it is primary. Smog ozone forms in the air from other gases in sunlight, so it is secondary. Vegetable peel is broken down by microbes, so it is biodegradable. DDT persists for many years, so it is non-biodegradable.

Primary pollutants are released directly from a source; secondary pollutants are made in the air from primary ones. ppm = (part ÷ whole) × 1,000,000, with both in the same unit.

  • The environment has four connected parts: atmosphere, hydrosphere, lithosphere and biosphere.
  • Primary pollutants come straight from a source; secondary pollutants form later by reactions.
  • Biodegradable pollutants are broken down by microbes; non-biodegradable ones persist.
  • The troposphere is the weather layer; the stratosphere holds the ozone layer.
  • For dilute water, mg per litre is about ppm.

Check your understanding

  1. 1. In which layer of the atmosphere is the ozone layer found?

    1. Troposphere
    2. Stratosphere
    3. Hydrosphere
    4. Lithosphere
    Show answer

    Answer: B. The ozone layer lies in the stratosphere, roughly 10 to 50 km up. The troposphere is the lower weather layer; hydrosphere and lithosphere are not atmospheric layers at all.

  2. 2. Which of these is a secondary pollutant?

    1. Sulfur dioxide leaving a chimney
    2. Carbon monoxide in car exhaust
    3. Ozone formed in photochemical smog
    4. Soot from burning wood
    Show answer

    Answer: C. Smog ozone is not emitted by any source; it forms in the air when nitrogen oxides and hydrocarbons react in sunlight. The other three come directly from a source, so they are primary.

  3. 3. Which of these is a non-biodegradable pollutant?

    1. DDT
    2. Vegetable peel
    3. Paper
    4. Animal dung
    Show answer

    Answer: A. DDT is broken down extremely slowly and persists in soil, water and living things. Vegetable peel, paper and dung are decomposed by microbes.

  4. 4. 500 g of water contains 0.01 g of a pollutant. What is its concentration?

    1. 2 ppm
    2. 20 ppm
    3. 200 ppm
    4. 0.02 ppm
    Show answer

    Answer: B. ppm = (0.01 ÷ 500) × 1,000,000 = 0.00002 × 1,000,000 = 20 ppm.

  5. 5. In which layer do clouds, rain and most weather occur?

    1. Stratosphere
    2. Lithosphere
    3. Biosphere
    4. Troposphere
    Show answer

    Answer: D. The troposphere, the lowest layer up to about 10 km, contains almost all the water vapour, so weather happens there.

Sign in to keep track of the lessons you finish.

Next lesson → Air pollutants: gases and particles

Privacy · Terms · Refunds · Delivery