• Foundation
  • About 25 min
  • 15 practice questions

Final self-assessment: Environmental chemistry basics

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions without looking back at the lessons, writing your working for the calculations, and only then read the answers and explanations. These questions are a little harder than the lesson checks and mix ideas from the whole course.

Final self-assessment

  1. 1. A 2 kg soil sample contains 0.05 g of cadmium. What is the cadmium content?

    1. 2.5 ppm
    2. 25 ppm
    3. 250 ppm
    4. 0.025 ppm
    Show answer

    Answer: B. 2 kg = 2000 g. ppm = (0.05 ÷ 2000) × 1,000,000 = 0.000025 × 1,000,000 = 25 ppm.

  2. 2. Which pair consists of two secondary pollutants?

    1. SO₂ and CO
    2. NO and soot
    3. Smog ozone and PAN
    4. CO₂ and dust
    Show answer

    Answer: C. Ozone and PAN form in the air from NOx and hydrocarbons in sunlight; neither is released directly. The other pairs are released directly from sources.

  3. 3. 1 m³ of air contains 35 cm³ of a gas. What is its concentration by volume?

    1. 35 ppm
    2. 350 ppm
    3. 3.5 ppm
    4. 0.035 ppm
    Show answer

    Answer: A. 1 m³ = 1,000,000 cm³. 35 cm³ in 1,000,000 cm³ is 35 parts per million.

  4. 4. 60 g of carbon burns in limited air and is converted entirely to CO. What mass of CO forms?

    1. 220 g
    2. 120 g
    3. 70 g
    4. 140 g
    Show answer

    Answer: D. 60 g C = 5 mol. 2C + O₂ → 2CO gives 5 mol CO = 5 × 28 = 140 g. (220 g would be CO₂ from complete burning.)

  5. 5. Why is carbon monoxide dangerous even at low concentrations?

    1. It forms carboxyhaemoglobin, which is far more stable than oxyhaemoglobin, so the blood carries less oxygen
    2. It dissolves in rain to form strong acid
    3. It destroys the ozone layer
    4. It causes eutrophication of lakes
    Show answer

    Answer: A. CO binds haemoglobin much more firmly than oxygen does, cutting oxygen supply to the body.

  6. 6. Fumes are formed by

    1. grinding and crushing solids
    2. condensation of vapours during processes such as sublimation, distillation and boiling
    3. living bacteria and fungi in the air
    4. spraying liquids into air
    Show answer

    Answer: B. Fumes are condensed vapours. Grinding gives dust, living particles are viable particulates, and sprays give mists.

  7. 7. Rain sample X has pH 4.6 and sample Y has pH 6.6. Which statement is correct?

    1. Y has 2 times more H⁺ than X
    2. X has 2 times more H⁺ than Y
    3. X has 100 times more H⁺ than Y
    4. Y has 100 times more H⁺ than X
    Show answer

    Answer: C. Lower pH means more H⁺. The difference is 2 units, so X has 10² = 100 times more H⁺. (X is also below 5.6, so it counts as acid rain.)

  8. 8. Why does photochemical smog need sunlight?

    1. Sunlight splits NO₂ into NO and an oxygen atom, which forms ozone
    2. Sunlight melts the fog
    3. Sunlight produces SO₂ from coal
    4. Sunlight dissolves CO₂ in rain
    Show answer

    Answer: A. NO₂ → NO + O in sunlight; then O + O₂ → O₃, starting the oxidising smog chemistry.

  9. 9. 25 g of marble (CaCO₃) is completely attacked by sulfuric acid. What mass of CO₂ is released?

    1. 22 g
    2. 5.5 g
    3. 11 g
    4. 44 g
    Show answer

    Answer: C. 25 ÷ 100 = 0.25 mol CaCO₃. CaCO₃ + H₂SO₄ → CaSO₄ + H₂O + CO₂ gives 0.25 mol CO₂ = 0.25 × 44 = 11 g.

  10. 10. A student writes: 'The ozone hole is the cause of global warming.' Which correction is best?

    1. The statement is correct
    2. Global warming comes from greenhouse gases trapping infrared; the ozone hole lets more ultraviolet reach the ground
    3. Global warming is caused by acid rain
    4. The ozone hole cools the whole Earth
    Show answer

    Answer: B. They are different problems: greenhouse gases trap infrared heat in the lower atmosphere, while ozone loss in the stratosphere lets more UV through.

  11. 11. What is the net reaction of Cl + O₃ → ClO + O₂ followed by ClO + O → Cl + O₂?

    1. O₃ + O → 2O₂
    2. Cl + O → ClO
    3. 2O₃ → 3O₂ + Cl
    4. O₂ → 2O
    Show answer

    Answer: A. Adding and cancelling Cl and ClO on both sides leaves O₃ + O → 2O₂; chlorine is regenerated.

  12. 12. What mass of CO₂ forms when 4 kg of methane burns completely?

    1. 4 kg
    2. 8 kg
    3. 44 kg
    4. 11 kg
    Show answer

    Answer: D. CH₄ (16) gives CO₂ (44). 4 kg × 44 ÷ 16 = 11 kg.

  13. 13. Which order of events correctly describes eutrophication?

    1. Algae die → fertiliser run-off → oxygen rises → fish grow
    2. Fertiliser run-off → algal bloom → algae die and decompose → dissolved oxygen falls → fish die
    3. Fish die → algae grow → fertiliser forms → oxygen rises
    4. Oxygen falls → fertiliser run-off → algae die → fish grow
    Show answer

    Answer: B. Nutrients feed an algal bloom; decomposing dead algae use up dissolved oxygen, so fish die.

  14. 14. 250 mL of water contains 0.5 mg of fluoride. What is the concentration?

    1. 0.125 ppm
    2. 0.5 ppm
    3. 2 ppm
    4. 125 ppm
    Show answer

    Answer: C. 250 mL = 0.25 L. 0.5 mg ÷ 0.25 L = 2 mg/L ≈ 2 ppm.

  15. 15. Which is a principle of green chemistry?

    1. Use the most toxic reagent available
    2. Use as much solvent as possible
    3. Dilute pollution so it is less visible
    4. Prevent waste rather than treat it after it is formed
    Show answer

    Answer: D. Green chemistry stops pollution at the source; diluting or using more harmful substances does the opposite.

If you missed any, revisit the matching lesson: questions 1-3 are from lesson 1 (environment, pollutants and ppm), 4-6 from lesson 2 (air pollutants), 7-9 from lesson 3 (acid rain and smog), 10-12 from lesson 4 (greenhouse effect and ozone) and 13-15 from lesson 5 (water, soil and green chemistry).

Privacy · Terms · Refunds · Delivery