• Foundation
  • About 16 min
  • 5 practice questions

Water pollution, soil pollution and green chemistry

Explain how sewage, fertilisers and toxic chemicals pollute water and soil, use the ideas of dissolved oxygen and BOD, and describe how green chemistry prevents pollution.

If something looks wrong, please tell us.

Water and soil receive much of what the air carries down, plus everything we pour or dump directly. Some of this waste is food for microbes and some is poison that never goes away. This lesson explains the main water and soil pollutants, two measurements chemists use to judge water quality, and finally the idea of green chemistry: designing chemical processes so that pollution is not created in the first place.

Sources of water pollution

A point source is a single place where waste enters water, such as a factory's discharge pipe or a sewage outlet. It is easy to identify and control. A non-point source is spread out, such as fertiliser and pesticide run-off from farms or rainwater washing a city's streets. It is much harder to control.

The main kinds of pollutant are: pathogens, disease-causing bacteria and other microbes from sewage and animal waste; organic wastes such as leaves, food waste and sewage; chemical pollutants including heavy metals (mercury, lead, cadmium), acids, detergents, oils and pesticides; and plant nutrients such as nitrates and phosphates from fertilisers.

Dissolved oxygen and BOD

Fish and other water animals breathe the oxygen dissolved in water, called dissolved oxygen (DO). When organic waste enters water, aerobic bacteria break it down and use up dissolved oxygen in the process. If there is a lot of waste, the oxygen falls so low that fish die.

The biochemical oxygen demand (BOD) is the amount of oxygen that bacteria need to break down the organic matter in a given volume of water. It is a measure of how much organic pollution the water carries. Clean water has a low BOD; sewage-polluted water has a high BOD. Remember the direction: high BOD means bad water.

Eutrophication

Nitrates and phosphates from fertilisers and some detergents are plant nutrients. In a lake they cause a rapid growth of algae, an algal bloom, that covers the surface. When the algae die, bacteria decompose them and use up the dissolved oxygen. Fish and other animals die for lack of oxygen. This process of a water body becoming over-rich in nutrients and losing its oxygen is called eutrophication.

Other chemical pollutants

Heavy metals such as mercury, lead and cadmium are not broken down and can damage the kidneys, liver and nervous system. Fluoride in small amounts helps protect teeth, but too much causes mottling of teeth and harm to bones. Excess nitrate in drinking water can cause methaemoglobinaemia, known as blue baby syndrome.

Soil pollution and biomagnification

Pesticides are used to kill pests: insecticides, herbicides (weed killers) and fungicides. Older insecticides such as DDT are not biodegradable and dissolve in fat rather than water. Small amounts taken in by plankton are stored in their fat; fish eat many plankton, birds eat many fish, and the concentration rises at each step of the food chain. This is biomagnification. Industrial waste and plastics also pollute soil.

Green chemistry

Treating pollution after it is made is costly. Green chemistry aims to design products and processes that reduce or remove the use and production of harmful substances. Its ideas include preventing waste rather than cleaning it up, using safer solvents such as water, using less energy and choosing renewable starting materials. Two examples: dry cleaning with liquid carbon dioxide instead of chlorinated solvents such as tetrachloroethene, and bleaching paper with hydrogen peroxide instead of chlorine.

Worked example 1: concentration in water

A 2 litre sample of water contains 4 mg of nitrate. Find the concentration in ppm. Concentration = 4 mg ÷ 2 L = 2 mg/L. For dilute water, 1 mg/L ≈ 1 ppm, so it is 2 ppm. Check by mass: 2 L ≈ 2 kg = 2,000,000 mg, and (4 ÷ 2,000,000) × 1,000,000 = 2 ppm.

Worked example 2: biomagnification (illustrative numbers)

Suppose, purely to illustrate, that a pesticide is 0.01 ppm in lake water and that its concentration rises tenfold at each step: water → plankton → small fish → large fish → fish-eating bird. Plankton: 0.01 × 10 = 0.1 ppm. Small fish: 1 ppm. Large fish: 10 ppm. Bird: 100 ppm. After four steps the concentration is 10⁴ = 10,000 times that in the water, which is why top predators suffer most.

High BOD means a lot of organic waste and little oxygen left for fish. Prevent pollution at the source: that is the heart of green chemistry.

  • Point sources are single outlets; non-point sources are spread out.
  • Organic waste raises BOD and lowers dissolved oxygen.
  • Fertiliser nutrients cause eutrophication.
  • Non-biodegradable, fat-soluble pesticides biomagnify along food chains.
  • Green chemistry prevents waste and uses safer substances.

Check your understanding

  1. 1. A high BOD value for a river sample means that

    1. the water is very clean
    2. the water carries a lot of organic matter that needs oxygen to decompose
    3. the water has a high fluoride content
    4. the water is strongly acidic
    Show answer

    Answer: B. BOD is the oxygen bacteria need to break down organic matter. A lot of organic pollution means a high BOD.

  2. 2. Eutrophication of a lake is mainly caused by

    1. excess nitrates and phosphates
    2. excess dissolved oxygen
    3. very cold water
    4. ozone dissolving in the lake
    Show answer

    Answer: A. Fertiliser nutrients cause an algal bloom; decay of the algae then uses up dissolved oxygen.

  3. 3. Which is an example of green chemistry?

    1. Burning plastic waste in the open
    2. Using more DDT to kill pests
    3. Dumping factory effluent in a river
    4. Using liquid CO₂ in dry cleaning instead of a chlorinated solvent
    Show answer

    Answer: D. Replacing a harmful solvent with liquid CO₂ prevents pollution at the source. The other choices create pollution.

  4. 4. The rise in concentration of DDT along a food chain is called

    1. eutrophication
    2. photosynthesis
    3. biomagnification
    4. neutralisation
    Show answer

    Answer: C. DDT is stored in fat and its concentration increases at each step of the food chain: biomagnification.

  5. 5. 5 litres of water contain 10 mg of lead. What is the concentration?

    1. 0.5 ppm
    2. 2 ppm
    3. 50 ppm
    4. 20 ppm
    Show answer

    Answer: B. 10 mg ÷ 5 L = 2 mg/L, and for dilute water 1 mg/L ≈ 1 ppm, so 2 ppm.

Privacy · Terms · Refunds · Delivery