• Practice
  • 15 practice questions

Final self-assessment: metals and non-metals

Test yourself on the whole course: 15 questions with answers explained.

If something looks wrong, please tell us.

Attempt all 15 questions on your own first, then check your answers and read each explanation. The questions are a little harder than the lesson checks and cover all five lessons, about three per lesson.

Final self-assessment

  1. 1. Which statement is correct?

    1. Diamond is a good conductor of electricity
    2. Graphite is a non-metal that conducts electricity
    3. Mercury is a liquid non-metal
    4. Bromine is a liquid metal
    Show answer

    Answer: B. Graphite conducts because each carbon has a free electron. Diamond is a poor conductor, mercury is a metal and bromine is a non-metal.

  2. 2. Which oxide is correctly matched with its nature?

    1. Al₂O₃: amphoteric
    2. MgO: acidic
    3. SO₂: basic
    4. CO: acidic
    Show answer

    Answer: A. Al₂O₃ reacts with both acids and bases. MgO is basic, SO₂ is acidic and CO is neutral.

  3. 3. An element forms a basic oxide and positive ions. It is most likely:

    1. A non-metal
    2. A noble gas
    3. A metal
    4. An allotrope of carbon
    Show answer

    Answer: C. Metals lose electrons to form positive ions and their oxides are basic; non-metals form negative ions and acidic or neutral oxides.

  4. 4. In which case is there no reaction?

    1. Zinc added to copper sulphate solution
    2. Lead added to zinc sulphate solution
    3. Iron added to copper sulphate solution
    4. Magnesium added to zinc sulphate solution
    Show answer

    Answer: B. Lead is below zinc in the series, so it cannot displace zinc. In the other cases the metal added is more reactive than the metal in the salt.

  5. 5. Which metal reacts with dilute hydrochloric acid but with water only as steam?

    1. Sodium
    2. Copper
    3. Silver
    4. Zinc
    Show answer

    Answer: D. Zinc does not react with cold or hot water but reacts with steam, and it is above hydrogen so it reacts with dilute acid. Sodium reacts with cold water; copper and silver react with neither.

  6. 6. What mass of hydrogen forms when 2.4 g of magnesium reacts with excess dilute hydrochloric acid? (Mg = 24, H = 1)

    1. 0.1 g
    2. 0.2 g
    3. 2 g
    4. 0.4 g
    Show answer

    Answer: B. Mg + 2HCl → MgCl₂ + H₂. 2.4 g of Mg is 0.1 mol, which gives 0.1 mol H₂ = 0.2 g.

  7. 7. What mass of iron can be obtained from 40 g of Fe₂O₃? (Fe = 56, O = 16)

    1. 14 g
    2. 56 g
    3. 20 g
    4. 28 g
    Show answer

    Answer: D. 40 ÷ 160 = 0.25 mol Fe₂O₃, giving 0.5 mol Fe = 0.5 × 56 = 28 g.

  8. 8. Which metal is extracted by electrolysis rather than by reduction with carbon?

    1. Magnesium
    2. Iron
    3. Lead
    4. Mercury
    Show answer

    Answer: A. Magnesium is high in the reactivity series, so carbon cannot reduce its compounds. Iron and lead are reduced with carbon; mercury is obtained by heating.

  9. 9. Why does the thermit reaction Fe₂O₃ + 2Al → Al₂O₃ + 2Fe take place?

    1. Iron is more reactive than aluminium
    2. Aluminium oxide is less stable than iron oxide
    3. Aluminium is more reactive than iron, so it takes oxygen from iron(III) oxide
    4. Iron oxide is a reducing agent
    Show answer

    Answer: C. The more reactive aluminium displaces iron from its oxide. The reaction is strongly exothermic, giving molten iron used to weld railway tracks.

  10. 10. Why do alloys such as stainless steel replace pure metals for many uses?

    1. They always conduct electricity better than pure metals
    2. They are compounds with fixed formulas
    3. They are usually harder and resist corrosion better, though they conduct electricity less well
    4. They are always softer than pure metals
    Show answer

    Answer: C. An alloy is a homogeneous mixture, not a compound. It is usually harder and more corrosion-resistant but a poorer electrical conductor than the pure metal.

  11. 11. Under which condition does iron rust fastest?

    1. In salty water with air
    2. In dry air
    3. In boiled water under oil
    4. Coated with oil
    Show answer

    Answer: A. Rusting needs air and water, and salty water speeds it up. The other conditions lack water or air.

  12. 12. What is the chemical name of rust?

    1. Iron(II) sulphide
    2. Basic copper carbonate
    3. Anhydrous iron(II) chloride
    4. Hydrated iron(III) oxide, Fe₂O₃·xH₂O
    Show answer

    Answer: D. Rust is hydrated iron(III) oxide, a flaky reddish-brown solid. Basic copper carbonate is the green coating on copper.

  13. 13. Which pair are allotropes of the same element?

    1. Oxygen and nitrogen
    2. Rhombic and monoclinic sulphur
    3. Diamond and silicon
    4. Sodium and potassium
    Show answer

    Answer: B. Rhombic and monoclinic sulphur are two forms of the element sulphur. Each other pair contains two different elements.

  14. 14. What forms when sulphur dioxide dissolves in water?

    1. Sulphurous acid, H₂SO₃
    2. Sulphuric acid, H₂SO₄
    3. Hydrogen sulphide, H₂S
    4. Sodium sulphite, Na₂SO₃
    Show answer

    Answer: A. SO₂ + H₂O → H₂SO₃, sulphurous acid. The acid formed shows that SO₂ is an acidic oxide.

  15. 15. What mass of hydrogen is released when 3.25 g of zinc reacts with excess dilute hydrochloric acid? (Zn = 65, H = 1)

    1. 0.05 g
    2. 0.2 g
    3. 0.1 g
    4. 1 g
    Show answer

    Answer: C. Zn + 2HCl → ZnCl₂ + H₂. 3.25 ÷ 65 = 0.05 mol Zn gives 0.05 mol H₂ = 0.05 × 2 = 0.1 g.

Which lesson to revisit: Questions 1-3: lesson 1, Properties of metals and non-metals with exceptions; questions 4-6: lesson 2, Reactivity series and displacement reactions; questions 7-9: lesson 3, Extraction of metals: ores, roasting and reduction; questions 10-12: lesson 4, Corrosion, alloys and metal compounds; questions 13-15: lesson 5, Non-metals and mixed metal-non-metal problems.

Privacy · Terms · Refunds · Delivery