• Foundation
  • About 13 min
  • 5 practice questions

Diluting and mixing solutions: keeping the solute count the same

Change a concentration by adding water or by mixing two solutions, using the idea that the amount of solute does not change when you dilute.

If something looks wrong, please tell us.

A chemist rarely buys a solution at exactly the strength needed. A concentrated stock is diluted with water, or two solutions are mixed. Hospitals dilute medicines and farmers dilute sprays in the same way. The method is always one idea: when you add only solvent, the amount of solute stays the same, and what changes is the total amount of solution. This lesson turns that idea into simple steps.

Dilution by mass percentage

Mass percentage is solute mass divided by solution mass. Adding water raises the solution mass but leaves the solute mass unchanged. So, to find a new percentage, first find the mass of solute in the original, then divide by the new total mass. Masses always add, so this works exactly.

Worked example 1: adding water

How much water must be added to 100 g of a 20% sugar solution to make it 10%? Step 1: solute = 20% of 100 g = 20 g. Step 2: the new solution must be 10% sugar, so its mass = 20 ÷ 0.10 = 200 g. Step 3: water added = 200 − 100 = 100 g. Check: 20 g in 200 g is 10%.

Mixing two solutions of the same solute

When two solutions of the same solute are mixed, add the solute from each and add the masses of the solutions. The new percentage is the total solute divided by the total mass.

Worked example 2: equal masses

Equal masses of 10% and 30% salt solutions are mixed. Take 100 g of each. Step 1: solute in the first = 10 g; in the second = 30 g. Step 2: total solute = 40 g in 200 g. Step 3: percentage = 40 ÷ 200 × 100 = 20%. With equal masses the answer is the plain average.

Worked example 3: unequal masses

100 g of a 10% solution is mixed with 300 g of a 30% solution. Step 1: solute = 10 g + 90 g = 100 g. Step 2: total mass = 400 g. Step 3: percentage = 100 ÷ 400 × 100 = 25%. This is not the plain average (20%), because the stronger solution is present in a larger amount. The answer is always nearer to the strength of the solution that is present in greater quantity.

Dilution by molarity

Molarity is moles of solute per litre of solution. Moles of solute = M × V (V in litres). Since the moles do not change when only water is added, M1 × V1 = M2 × V2, where 1 is the stock solution and 2 is the diluted solution. Both volumes can be in mL provided both use the same unit. Remember that V2 is the final total volume, not the volume of water added.

Worked example 4: diluting a stock

50 mL of a 2 M solution is diluted with water to a total volume of 250 mL. Step 1: moles of solute = 2 × 0.050 = 0.10 mol. Step 2: the new molarity = 0.10 ÷ 0.250 = 0.4 M. Using the formula: 2 × 50 = M2 × 250 gives M2 = 0.4 M.

Worked example 5: how much stock?

How much 1 M stock is needed to prepare 500 mL of 0.1 M solution? Step 1: moles needed = 0.1 × 0.500 = 0.05 mol. Step 2: volume of 1 M stock holding 0.05 mol = 0.05 ÷ 1 = 0.05 L = 50 mL. Step 3: take 50 mL of stock and add water to make 500 mL. Notice the order: dilute in a flask up to the mark; do not pour in 500 mL of water and then add the stock.

Adding solvent does not change the amount of solute: moles (or grams) of solute before = after. M1V1 = M2V2 for dilution; for mixing, add the solute and add the total.

Key takeaways

  • Find the solute first; it is the quantity that stays constant when only water is added.
  • Mixing two solutions: total solute divided by total mass gives the new percentage.
  • The result lies between the two strengths, nearer to the one present in greater quantity.
  • In M1V1 = M2V2, V2 is the final total volume.

Check your understanding

  1. 1. 100 g of a 20% sugar solution is diluted by adding 100 g of water. Its new mass percentage is:

    1. 5%
    2. 15%
    3. 10%
    4. 20%
    Show answer

    Answer: C. Sugar = 20 g, new mass = 200 g, percentage = 20 ÷ 200 × 100 = 10%.

  2. 2. 50 mL of a 2 M solution is diluted with water to 250 mL. The new molarity is:

    1. 0.1 M
    2. 0.4 M
    3. 10 M
    4. 0.8 M
    Show answer

    Answer: B. M2 = M1V1 ÷ V2 = 2 × 50 ÷ 250 = 0.4 M.

  3. 3. Equal masses of 10% and 30% salt solutions are mixed. The mass percentage of the mixture is:

    1. 20%
    2. 40%
    3. 15%
    4. 25%
    Show answer

    Answer: A. With equal masses, total solute = 10 + 30 = 40 per 200 total, which is 20%.

  4. 4. 100 g of a 10% solution and 300 g of a 30% solution are mixed. The mass percentage of the mixture is:

    1. 20%
    2. 30%
    3. 25%
    4. 15%
    Show answer

    Answer: C. Solute = 10 + 90 = 100 g in 400 g, so 25%. It is nearer to 30% because more of the 30% solution is present.

  5. 5. What volume of 1 M stock is needed to prepare 500 mL of 0.1 M solution?

    1. 5 mL
    2. 500 mL
    3. 100 mL
    4. 50 mL
    Show answer

    Answer: D. Moles needed = 0.1 × 0.5 = 0.05 mol, which is held in 0.05 ÷ 1 = 0.05 L = 50 mL of stock.

Privacy · Terms · Refunds · Delivery