- Foundation
- About 25 min
- 15 practice questions
Final self-assessment: Solutions basics
Test yourself on the whole course: 15 questions with answers explained.
If something looks wrong, please tell us.
Attempt all 15 questions on paper first, writing down your working, and only then check the answers and explanations. These questions mix the ideas of the whole course and are a little harder than the lesson checks. Use Kb = 0.52 K kg/mol and Kf = 1.86 K kg/mol for water and R = 0.0821 L atm/(mol K) wherever needed.
Final self-assessment
-
1. At a certain temperature, 60 g of a salt is the most that dissolves in 150 g of water. What is its solubility in grams per 100 g of water?
- 60 g
- 40 g
- 90 g
- 25 g
Show answer
Answer: B. Scale to 100 g of water: 60 × 100/150 = 40 g per 100 g of water.
-
2. Hydrogen absorbed in palladium is an example of which type of solution?
- Solid in gas
- Gas in liquid
- Gas in solid
- Liquid in solid
Show answer
Answer: C. Hydrogen (gas) is the solute and palladium (solid) is the solvent, so it is a gas-in-solid solution.
-
3. The dissolving of a certain solid in water absorbs heat. What happens to its solubility when the water is warmed?
- It increases
- It decreases
- It is unchanged
- It becomes zero
Show answer
Answer: A. For an endothermic process, adding heat shifts the balance towards dissolving (Le Chatelier's principle), so solubility increases.
-
4. 200 g of a 10% w/w sugar solution is mixed with 300 g of a 20% w/w sugar solution. What is the mass percentage of sugar in the mixture?
- 15%
- 16%
- 30%
- 14%
Show answer
Answer: B. Sugar = 10% of 200 + 20% of 300 = 20 + 60 = 80 g. Total mass = 500 g. Mass % = 80/500 × 100 = 16%. (15% is the simple average, which ignores the different masses.)
-
5. How much water must be added to 100 g of a 25% w/w salt solution to make it 10% w/w?
- 150 g
- 100 g
- 250 g
- 50 g
Show answer
Answer: A. Salt = 25 g, and it does not change. For 10%, the solution must weigh 25/0.10 = 250 g. Water to add = 250 − 100 = 150 g.
-
6. A 1.5 kg sample of water contains 0.03 g of a dissolved substance. What is the concentration in ppm by mass?
- 2 ppm
- 200 ppm
- 0.2 ppm
- 20 ppm
Show answer
Answer: D. ppm = 0.03/1500 × 10^6 = 20 ppm.
-
7. What mass of NaOH (40 g/mol) is needed to make 250 mL of a 0.2 M solution?
- 8 g
- 0.2 g
- 2 g
- 5 g
Show answer
Answer: C. Moles needed = 0.2 × 0.25 = 0.05 mol. Mass = 0.05 × 40 = 2 g.
-
8. 1 mol of a solute is dissolved in 1 kg of water (18 g/mol). What is the mole fraction of the solute?
- 0.0177
- 0.0180
- 0.5
- 0.0556
Show answer
Answer: A. Moles of water = 1000/18 = 55.56. x(solute) = 1/(1 + 55.56) = 1/56.56 ≈ 0.0177. (0.0180 comes from forgetting to add the solute's own moles to the total.)
-
9. 3 g of urea (60 g/mol) is dissolved in 200 g of water. What is the molality?
- 0.015 m
- 0.25 m
- 0.025 m
- 2.5 m
Show answer
Answer: B. Moles = 3/60 = 0.05. Mass of water = 0.2 kg. Molality = 0.05/0.2 = 0.25 m.
-
10. Liquids A (p° = 500 mm Hg) and B (p° = 200 mm Hg) form a solution that obeys Raoult's law, with total vapour pressure 320 mm Hg. What is the mole fraction of A in the liquid?
- 0.6
- 0.4
- 0.64
- 0.25
Show answer
Answer: B. 500 xA + 200(1 − xA) = 320, so 200 + 300 xA = 320, giving 300 xA = 120 and xA = 0.4.
-
11. A gas has Henry's law constant 1 × 10^5 bar in water at some temperature. What is its mole fraction in water when its partial pressure is 2 bar?
- 2 × 10^-5
- 5 × 10^-6
- 2 × 10^5
- 5 × 10^4
Show answer
Answer: A. x = p/KH = 2/(1 × 10^5) = 2 × 10^-5.
-
12. A pure solvent has vapour pressure 80 mm Hg. After a non-volatile solute is added, the vapour pressure is 76 mm Hg. What is the mole fraction of the solute?
- 0.95
- 0.04
- 0.05
- 0.5
Show answer
Answer: C. Relative lowering = (80 − 76)/80 = 4/80 = 0.05 = x(solute). (0.95 is the solvent's mole fraction.)
-
13. 6 g of urea (60 g/mol) is dissolved in 500 g of water. At what temperature does the solution freeze?
- −0.186 °C
- −0.372 °C
- −0.744 °C
- −3.72 °C
Show answer
Answer: B. Moles = 6/60 = 0.1; molality = 0.1/0.5 = 0.2 m. ΔTf = 1.86 × 0.2 = 0.372 K. Freezing point = −0.372 °C.
-
14. A solution of a non-electrolyte has an osmotic pressure of 2.463 atm at 300 K. What is its molarity?
- 1 M
- 0.01 M
- 0.25 M
- 0.1 M
Show answer
Answer: D. C = π/(RT) = 2.463/(0.0821 × 300) = 2.463/24.63 = 0.1 M.
-
15. At normal pressure, what is the boiling point of a 0.5 m aqueous solution of a non-electrolyte?
- 100.52 °C
- 99.74 °C
- 100.13 °C
- 100.26 °C
Show answer
Answer: D. ΔTb = 0.52 × 0.5 = 0.26 K. Boiling point = 100 + 0.26 = 100.26 °C. A solute raises, never lowers, the boiling point, so 99.74 °C is impossible.
Which lessons to revisit: questions 1-3 come from lesson 1 (solutions, types and solubility), 4-6 from lesson 2 (mass and volume percentages and ppm), 7-9 from lesson 3 (mole fraction, molarity and molality), 10-12 from lesson 4 (vapour pressure, Raoult's law and Henry's law) and 13-15 from lesson 5 (colligative properties).
Sign in to keep track of the lessons you finish.