• Foundation
  • About 14 min
  • 5 practice questions

Solubility data: reading tables and curves, and crystallisation

Use a table of solubility against temperature to find how much dissolves, how much crystallises on cooling, and why some salts are easier to purify than others.

If something looks wrong, please tell us.

Solubility is rarely a single number: it changes with temperature, and chemists present it as a table or a curve. Reading such data is a basic skill, and it answers practical questions such as how much salt will crystallise when a hot solution cools. In this lesson you work with a made-up table of solubility values for two salts. They are illustrative, not data about real substances.

A solubility table

Illustrative solubilities
TemperatureSalt X (g per 100 g water)Salt Y (g per 100 g water)
20 °C3036
40 °C4037
60 °C5538

Each figure means: this many grams of solute make a saturated solution with 100 g of water at that temperature. For Salt X, solubility climbs steeply with temperature; for Salt Y it hardly changes. A graph of such data is a solubility curve, with temperature on the horizontal axis and solubility on the vertical axis. A steep curve means a large temperature effect.

Three questions you can answer from the table

  1. How much solute dissolves in a given mass of water? Scale the figure: for twice the water, twice the solute.
  2. How much water is needed for a given mass of solute? Divide the solute mass by the solubility and multiply by 100.
  3. How much crystallises when a saturated solution is cooled? Work out what the same water holds at the lower temperature and subtract.

Worked example 1: scaling

How much of Salt X dissolves in 200 g of water at 40 °C? Step 1: solubility at 40 °C is 40 g per 100 g. Step 2: for 200 g of water, 40 × 2 = 80 g. So at most 80 g dissolves; adding more leaves a solid residue.

Worked example 2: water needed

What mass of water is needed to dissolve 60 g of Salt X at 40 °C? Step 1: 40 g needs 100 g of water. Step 2: 60 g needs 100 × 60 ÷ 40 = 150 g of water.

Worked example 3: cooling

A saturated solution of Salt X is made at 60 °C using 100 g of water, so it holds 55 g of Salt X. It is cooled to 20 °C. Step 1: at 20 °C, 100 g of water holds only 30 g. Step 2: the surplus = 55 − 30 = 25 g. Step 3: 25 g of crystals form and the solution left is saturated at 20 °C. For Salt Y, the same cooling gives 38 − 36 = 2 g only.

Converting to a mass percentage

A solubility given per 100 g of water can be turned into a mass percentage of the saturated solution. The solution mass is 100 g of water plus the dissolved salt. Salt X at 20 °C: 30 g in (100 + 30) = 130 g, so the percentage = 30 ÷ 130 × 100 = 23.1%. The trap is dividing by 100 g instead of 130 g.

Crystallisation as a method of purification

To purify a salt, dissolve it in a minimum of hot water to make a saturated solution, filter off insoluble impurities, then cool slowly. The salt crystallises, and soluble impurities, present in small quantities, stay in the solution. This works well for Salt X, because cooling removes a large fraction of it from solution. It works poorly for Salt Y, whose solubility barely changes, so most of it would stay dissolved. For such a salt, evaporating some of the water is the better route.

Read solubility as grams per 100 g of water at a stated temperature. Scale for other masses of water, subtract the cold value from the hot value for crystals, and divide by solution mass for a percentage.

Key takeaways

  • A steep solubility curve means a strong temperature effect and good crystallisation on cooling.
  • Crystals on cooling = amount held hot − amount held cold, for the same mass of water.
  • Solubility per 100 g of water is not a mass percentage; add the solute to the water first.
  • Slow cooling of a hot saturated solution gives purer crystals.

Check your understanding

  1. 1. Using the table, the most of Salt X that dissolves in 200 g of water at 40 °C is:

    1. 40 g
    2. 20 g
    3. 80 g
    4. 120 g
    Show answer

    Answer: C. Solubility is 40 g per 100 g, so 200 g of water holds 80 g.

  2. 2. A saturated solution of Salt X made with 100 g of water at 60 °C is cooled to 20 °C. The mass of crystals formed is:

    1. 25 g
    2. 30 g
    3. 55 g
    4. 2 g
    Show answer

    Answer: A. At 60 °C the water holds 55 g; at 20 °C it holds 30 g; 55 − 30 = 25 g crystallises.

  3. 3. The mass percentage of Salt X in its saturated solution at 20 °C is about:

    1. 30.0%
    2. 23.1%
    3. 33.3%
    4. 18.5%
    Show answer

    Answer: B. The solution mass is 100 + 30 = 130 g, so 30 ÷ 130 × 100 = 23.1%.

  4. 4. Which salt is better suited to purification by cooling a hot saturated solution?

    1. Salt Y, because its solubility changes little
    2. Both equally, because both dissolve
    3. Neither, as crystallisation needs evaporation only
    4. Salt X, because its solubility falls steeply on cooling
    Show answer

    Answer: D. Salt X loses a large amount from solution on cooling, so many crystals form. Salt Y would stay mostly dissolved.

  5. 5. The mass of water needed to dissolve 60 g of Salt X at 40 °C is:

    1. 100 g
    2. 150 g
    3. 240 g
    4. 60 g
    Show answer

    Answer: B. 40 g dissolves in 100 g of water, so 60 g needs 100 × 60 ÷ 40 = 150 g.

Privacy · Terms · Refunds · Delivery