- Foundation
- About 15 min
- 5 practice questions
Vapour pressure, Raoult's law and Henry's law
Explain vapour pressure, use Raoult's law to find the vapour pressure of a solution, and use Henry's law to relate the solubility of a gas to its pressure.
If something looks wrong, please tell us.
Why does a pot of salty water need a little more heat to boil than plain water, and why does a bottle of soda fizz when you open it? Both answers involve pressure above a liquid. This lesson introduces vapour pressure and two simple laws, Raoult's law and Henry's law, that link pressure to the composition of a solution.
What vapour pressure is
Put a liquid in a closed container. Some molecules at the surface escape into the space above as vapour, and some vapour molecules return to the liquid. Soon the two rates become equal: a dynamic equilibrium. The pressure the vapour then exerts is the vapour pressure of the liquid at that temperature. Vapour pressure rises with temperature, because more molecules have enough energy to escape. A liquid boils when its vapour pressure equals the outside pressure.
Raoult's law for two volatile liquids
When two liquids that both evaporate (A and B) are mixed, each contributes a partial pressure to the vapour. Raoult's law says: the partial vapour pressure of each component equals its mole fraction in the liquid multiplied by the vapour pressure of the pure component. In symbols, pA = xA × p°A and pB = xB × p°B, where p°A is the vapour pressure of pure A. The total vapour pressure is the sum: P = pA + pB (Dalton's law of partial pressures).
Raoult's law with a non-volatile solute
If the solute does not evaporate (sugar or salt in water), only the solvent contributes vapour. Then p = x(solvent) × p°(solvent). Because x(solvent) is less than 1, the solution's vapour pressure is lower than that of the pure solvent. Fewer solvent molecules sit at the surface, so fewer escape. This lowering is the starting point of the next lesson.
Henry's law for gases in liquids
Henry's law says the partial pressure of a gas above a solution is proportional to its mole fraction in the solution: p = KH × x, where KH is Henry's law constant. Rearranged, x = p/KH: double the gas pressure and you double the amount dissolved. Different gases have different KH values at a given temperature, and a larger KH means lower solubility, because a bigger pressure is needed for the same mole fraction. A soft-drink bottle is sealed with carbon dioxide under high pressure; when you open it, the pressure above the liquid drops, less gas can stay dissolved, and bubbles appear.
| Law | Equation | Applies to |
|---|---|---|
| Raoult's law | pA = xA × p°A | Each volatile component of a liquid solution |
| Total pressure | P = pA + pB | Mixture of two volatile liquids |
| Henry's law | p = KH × x | A gas dissolved in a liquid |
Worked example 1: two volatile liquids
Pure A has vapour pressure 400 mm Hg and pure B 100 mm Hg at some temperature (illustrative values). A solution has xA = 0.25, so xB = 0.75. Step 1: pA = 0.25 × 400 = 100 mm Hg. Step 2: pB = 0.75 × 100 = 75 mm Hg. Step 3: P = 100 + 75 = 175 mm Hg.
Worked example 2: non-volatile solute
A pure solvent has vapour pressure 100 mm Hg. A non-volatile solute is dissolved so that the solvent's mole fraction is 0.95. Step 1: p = 0.95 × 100 = 95 mm Hg. Step 2: the lowering is 100 − 95 = 5 mm Hg.
Worked example 3: Henry's law
A gas has KH = 5000 bar in water at some temperature (illustrative). Its partial pressure above the water is 1 bar. Step 1: x = p/KH = 1/5000. Step 2: x = 0.0002, which is 2 × 10^-4. If the pressure were raised to 3 bar, x would become 6 × 10^-4.
Raoult: p = x × p° for each volatile component. Henry: p = KH × x for a dissolved gas; bigger KH, less soluble.
Key takeaways. Vapour pressure is set by how easily molecules escape and rises with temperature. A non-volatile solute lowers the solvent's vapour pressure. Raoult's law and Henry's law have the same shape, pressure proportional to mole fraction, but Raoult's uses the pure liquid's vapour pressure and Henry's uses a constant for each gas.
Check your understanding
-
1. Pure A and pure B have vapour pressures 300 mm Hg and 150 mm Hg. For a solution with xA = 0.4, what is the total vapour pressure?
- 210 mm Hg
- 225 mm Hg
- 180 mm Hg
- 450 mm Hg
Show answer
Answer: A. pA = 0.4 × 300 = 120. pB = 0.6 × 150 = 90. Total = 120 + 90 = 210 mm Hg.
-
2. What happens to the vapour pressure of a liquid as its temperature rises?
- It decreases
- It increases
- It stays the same
- It becomes zero
Show answer
Answer: B. More molecules have enough energy to escape from the surface, so the vapour pressure increases.
-
3. A non-volatile solute is dissolved in a solvent of vapour pressure 200 mm Hg. The mole fraction of the solvent is 0.9. What is the vapour pressure of the solution?
- 20 mm Hg
- 200 mm Hg
- 222 mm Hg
- 180 mm Hg
Show answer
Answer: D. p = x(solvent) × p° = 0.9 × 200 = 180 mm Hg. (20 mm Hg is the lowering, not the vapour pressure.)
-
4. Gases X and Y dissolve in water at the same temperature, and KH for X is larger than KH for Y. At the same partial pressure, which is more soluble?
- X
- Both equally
- Y
- They cannot be compared
Show answer
Answer: C. x = p/KH. At equal p, the gas with the smaller KH has the larger mole fraction in solution, so Y is more soluble.
-
5. Why does a bottle of soda fizz when it is opened?
- The temperature suddenly rises
- The pressure of carbon dioxide above the liquid drops, so less gas can stay dissolved
- Water evaporates rapidly
- Sugar reacts with the air
Show answer
Answer: B. By Henry's law the dissolved amount is proportional to the gas pressure. Opening the bottle lowers the pressure, so dissolved carbon dioxide comes out as bubbles.
Sign in to keep track of the lessons you finish.