- Foundation
- About 15 min
- 5 practice questions
Hard and soft water
Tell hard water from soft water, separate temporary from permanent hardness by the salts that cause them, and choose and explain the right method of softening.
If something looks wrong, please tell us.
If you have ever seen soap refuse to lather, or white crust building up inside a kettle, you have met hard water. Hardness is one of the most asked topics in water chemistry because it links everyday experience with simple reactions. The key is to know which salts cause it and which method removes each kind.
What makes water hard
Water is called hard when it does not form lather easily with soap. The cause is dissolved calcium (Ca2+) and magnesium (Mg2+) salts. Soap is the sodium salt of a fatty acid, such as sodium stearate. Calcium and magnesium ions react with it to form an insoluble, sticky solid called scum: 2C17H35COONa + CaCl2 → (C17H35COO)2Ca + 2NaCl. Soap is wasted until all the calcium and magnesium have been used up, and only then does lather form. Water without these salts is called soft. Sodium and potassium salts do not cause hardness, because their soaps are soluble.
Temporary and permanent hardness
| Type | Caused by | Removed by boiling? |
|---|---|---|
| Temporary | Calcium and magnesium hydrogencarbonates: Ca(HCO3)2, Mg(HCO3)2 | Yes |
| Permanent | Calcium and magnesium chlorides and sulphates: CaCl2, MgCl2, CaSO4, MgSO4 | No |
Temporary hardness is called temporary because boiling removes it. On heating, the soluble hydrogencarbonate breaks down into an insoluble solid that settles out: Ca(HCO3)2 → CaCO3 + H2O + CO2. Magnesium hydrogencarbonate gives magnesium hydroxide: Mg(HCO3)2 → Mg(OH)2 + 2CO2. This solid is the crust (scale) seen inside kettles. Permanent hardness is not changed by boiling, so it needs a chemical method.
Methods of softening
- Boiling: removes temporary hardness only.
- Clark's method: add a calculated amount of slaked lime. Ca(HCO3)2 + Ca(OH)2 → 2CaCO3 + 2H2O. Removes temporary hardness.
- Washing soda (Na2CO3): turns calcium and magnesium into insoluble carbonates. CaCl2 + Na2CO3 → CaCO3 + 2NaCl. Removes both kinds.
- Ion exchange (zeolite or permutit): sodium zeolite swaps its sodium ions for calcium and magnesium ions. Na2Z + Ca2+ → CaZ + 2Na+. When used up, it is recharged with strong salt solution.
- Calgon (sodium hexametaphosphate): holds calcium and magnesium ions in a soluble complex so they cannot react with soap.
Hard water wastes soap, leaves scale in kettles, pipes and boilers, and makes clothes feel rough. Synthetic detergents lather even in hard water because their calcium and magnesium salts are soluble, so no scum forms.
Worked example 1: classifying a sample
A sample contains magnesium hydrogencarbonate and calcium sulphate. Mg(HCO3)2 gives temporary hardness and CaSO4 gives permanent hardness, so the water has both. Boiling and filtering removes only the magnesium part; the calcium sulphate stays and the water is still hard. Washing soda would remove both.
Worked example 2: writing a softening equation
Write the reaction of washing soda with magnesium sulphate. Swap partners: MgSO4 + Na2CO3 → MgCO3 + Na2SO4. Magnesium carbonate is insoluble and settles; sodium sulphate stays dissolved but causes no hardness.
Worked example 3: scale from boiling
How much calcium carbonate is formed when water containing 162 mg of calcium hydrogencarbonate is boiled? Ca(HCO3)2 = 40 + 2 × (1 + 12 + 48) = 162 g/mol, and CaCO3 = 100 g/mol. One mole gives one mole, so 162 mg gives 100 mg of CaCO3.
A simple soap test
You can compare the hardness of samples with a soap test. Take equal volumes of each sample in test tubes, add soap solution drop by drop and shake after each drop. Count the drops needed before a lasting lather forms. Distilled water lathers at once; the sample that needs the most drops is the hardest. Repeating the test on a boiled and filtered portion tells you the type: if far fewer drops are needed after boiling, most of the hardness was temporary; if the count hardly changes, it was mostly permanent.
Hardness = calcium and magnesium salts. Hydrogencarbonates give temporary hardness (boiling removes it); chlorides and sulphates give permanent hardness (needs washing soda, ion exchange or Calgon).
Key takeaways
Only calcium and magnesium salts make water hard. Learn the two groups: hydrogencarbonates are temporary, chlorides and sulphates are permanent. Boiling and Clark's method deal with temporary hardness; washing soda and ion exchange deal with both. Detergents beat hard water because their calcium salts dissolve.
Check your understanding
-
1. Which salt causes temporary hardness?
- CaCl2
- MgSO4
- Ca(HCO3)2
- NaCl
Show answer
Answer: C. Hydrogencarbonates of calcium and magnesium cause temporary hardness, which boiling removes.
-
2. Permanent hardness can be removed by
- boiling
- washing soda
- filtering through cloth
- adding common salt
Show answer
Answer: B. Washing soda turns calcium and magnesium into insoluble carbonates, e.g. CaCl2 + Na2CO3 → CaCO3 + 2NaCl. Boiling does not affect chlorides or sulphates.
-
3. How much CaCO3 forms when water containing 324 mg of Ca(HCO3)2 is boiled?
- 100 mg
- 162 mg
- 324 mg
- 200 mg
Show answer
Answer: D. 324 mg is 2 mmol of Ca(HCO3)2 (162 g/mol). Each gives one CaCO3 (100 g/mol), so 200 mg.
-
4. Detergents lather well in hard water because
- their calcium and magnesium salts are soluble
- they remove calcium by boiling it off
- they contain extra calcium
- they are made from animal fat
Show answer
Answer: A. Soap forms insoluble calcium and magnesium salts (scum). The calcium and magnesium salts of detergents dissolve, so no scum forms.
-
5. A water sample contains only dissolved sodium chloride. It is
- temporarily hard
- permanently hard
- soft, because sodium salts do not cause hardness
- both temporarily and permanently hard
Show answer
Answer: C. Hardness comes only from calcium and magnesium ions. Sodium soaps are soluble, so sodium chloride does not make water hard.
Sign in to keep track of the lessons you finish.