- Foundation
- About 13 min
- 5 practice questions
Water in nature: the water cycle, sources of water and why natural water is never pure
Follow water through the water cycle, compare rain, river, well and sea water, and explain how each picks up dissolved substances, with simple volume and mass calculations.
If something looks wrong, please tell us.
The water in a tap was once rain, and before that it was vapour rising from a sea, a lake or a leaf. Following its path explains why natural water is never perfectly pure and why some places have hard water and others soft. This lesson describes the water cycle and the main sources of water, and ties each source to what it carries. It also teaches the volume and mass conversions that come up in simple water problems.
The water cycle
Water moves in a continuous cycle driven by the heat of the Sun. Evaporation turns liquid water from oceans, rivers and lakes into vapour. Plants give out water vapour through their leaves, which is called transpiration. The warm moist air rises and cools, and the vapour condenses into tiny droplets that form clouds. When the droplets grow heavy enough they fall as precipitation: rain, hail or snow. Part of the water runs over the land into rivers and seas (runoff), and part soaks into the soil and rocks (infiltration) to become groundwater. The cycle then begins again.
- Evaporation: liquid to vapour, powered by the Sun.
- Condensation: vapour to droplets as air cools.
- Precipitation: water falls to the ground.
- Runoff and infiltration: water flows over the surface or sinks into the ground.
What each source carries
| Source | What it picks up | Result |
|---|---|---|
| Rain | Dissolves carbon dioxide from the air, giving a very weak acid (carbonic acid); also dust | Almost pure but slightly acidic |
| River | Mud and silt, organic matter, dissolved salts from soil and rocks, and waste | Variable, often cloudy |
| Lake | Dissolved salts and plant material; settles clear if still | Often softer than groundwater |
| Groundwater (well, borewell) | Calcium and magnesium salts from rocks as the water seeps through | Clear but often hard |
| Sea water | Salts carried by rivers over a very long time, left behind when water evaporates | Too salty to drink |
Groundwater is clear because the soil filters out mud, but it spends a long time in contact with rock containing calcium and magnesium compounds. Rain that has dissolved carbon dioxide can dissolve limestone slowly, which is how temporary hardness gets into well water. Rain falling in areas of hard rock such as granite meets few soluble salts and the water stays soft. Sea water is salty because rivers carry dissolved salts to the sea, and when water evaporates from the sea the salts stay behind.
Worked example 1: volume and mass of water
A rectangular tank measures 2 m long, 1.5 m wide and 1 m deep. Step 1: volume = 2 × 1.5 × 1 = 3 m³. Step 2: 1 m³ = 1000 L, so volume = 3000 L. Step 3: 1 L of water has a mass of about 1 kg, so the mass of water in the full tank is about 3000 kg.
Worked example 2: household use
Suppose each person in a household uses 100 L of water a day (an illustrative figure). For 5 persons over 30 days, Step 1: daily use = 5 × 100 = 500 L. Step 2: for 30 days = 500 × 30 = 15,000 L. Step 3: 15,000 L is 15 m³. The same sum with a different daily figure is just as easy once the method is clear.
Worked example 3: tracing the cycle
Sea water is heated by the Sun on a hot day, and a cloud forms inland that later drops rain on a hillside. Name the changes of state. Water evaporates from the sea (liquid to vapour), the vapour condenses into cloud droplets (vapour to liquid), and the droplets fall as rain. The salt stays in the sea, which is why rain is not salty even though it began as sea water.
Evaporation, condensation, precipitation, runoff. Rain is nearly pure but slightly acidic; groundwater is often hard; sea water is salty. 1 m³ = 1000 L and 1 L of water weighs about 1 kg.
Key takeaways
- The Sun drives the water cycle through evaporation and transpiration.
- Natural water always carries dissolved substances picked up on its path.
- Groundwater is clear but often hard; rain is soft and slightly acidic.
- 1 m³ of water is 1000 L, with a mass of about 1000 kg.
Check your understanding
-
1. In the water cycle, the change of water vapour into droplets that form clouds is called:
- Evaporation
- Condensation
- Precipitation
- Transpiration
Show answer
Answer: B. Vapour cooling into liquid droplets is condensation.
-
2. A tank measures 2 m by 1.5 m by 1 m. When full, it holds:
- 300 L
- 30 L
- 3000 L
- 30,000 L
Show answer
Answer: C. Volume = 3 m³ = 3 × 1000 = 3000 L.
-
3. A household of 5 persons uses 100 L per person per day (illustrative). The use over 30 days is:
- 5,000 L
- 1,500 L
- 150,000 L
- 15,000 L
Show answer
Answer: D. 5 × 100 × 30 = 15,000 L, which is 15 m³.
-
4. Well water is often hard because it:
- Dissolves calcium and magnesium salts from rocks
- Collects dust while falling through the air
- Carries sodium chloride in from the sea
- Has been distilled underground first
Show answer
Answer: A. Groundwater is in long contact with rock, from which it dissolves calcium and magnesium salts.
-
5. Rain water is slightly acidic because it:
- Collects chlorine from the pipes it runs through
- Dissolves carbon dioxide from air, forming carbonic acid
- Carries sea salt up from the ocean surface
- Is full of dissolved calcium from the clouds
Show answer
Answer: B. Dissolved CO2 forms a very weak acid, carbonic acid, so even clean rain has a pH a little below 7.
Sign in to keep track of the lessons you finish.