- Foundation
- About 14 min
- 5 practice questions
Testing water: pH, indicators and neutralisation
Read the pH scale, choose an indicator, calculate pH from hydrogen-ion concentration, and work out how much acid or alkali neutralises a sample.
If something looks wrong, please tell us.
Is the water acidic or basic? Is it fit for a fish tank, a swimming pool or a chemical process? The first test is always pH. This lesson explains how the pH scale works, how simple indicators show whether a sample is acidic or basic, and how to calculate the amount of alkali that cancels a given amount of acid. It builds on what you learned about pure water and pH in the earlier lessons.
The pH scale
The pH of a solution is defined as pH = −log [H+], where [H+] is the concentration of hydrogen ions in mol/L. At 25 °C, pure water has [H+] = 10^−7 mol/L and pH 7, which is neutral. A pH below 7 is acidic and a pH above 7 is basic. The scale is logarithmic: each step of 1 in pH is a tenfold change in [H+]. A solution of pH 3 is ten times more acidic than pH 4, and a hundred times more acidic than pH 5. At 25 °C, pH + pOH = 14, where pOH = −log [OH−].
Indicators
| Indicator | In acid | In base |
|---|---|---|
| Litmus | Red | Blue |
| Methyl orange | Red | Yellow |
| Phenolphthalein | Colourless | Pink |
| Universal indicator | A range of colours, red for strong acid to violet for strong base, green for neutral | (same indicator) |
Litmus and the other simple indicators say only 'acid' or 'base'. Universal indicator, a mixture of several dyes, changes colour gradually across the pH scale, so it gives an approximate pH. A pH meter gives a precise reading. Water treatment works use all of these to keep water in a suitable range.
Worked example 1: pH from concentration
A solution of hydrochloric acid has [H+] = 10^−3 mol/L. Step 1: pH = −log(10^−3). Step 2: pH = 3. A strong acid is fully ionised, so a 0.001 M HCl solution has [H+] = 0.001 M and pH 3. For a strong base such as 0.01 M NaOH, [OH−] = 10^−2, so pOH = 2 and pH = 14 − 2 = 12.
Worked example 2: from pH to concentrations
A water sample has pH 9. Step 1: [H+] = 10^−9 mol/L. Step 2: pOH = 14 − 9 = 5, so [OH−] = 10^−5 mol/L. The sample is basic because [OH−] is much greater than [H+].
Worked example 3: dilution and pH
A strong acid of pH 3 is diluted a hundred times with water. Step 1: [H+] falls from 10^−3 to 10^−5. Step 2: the pH rises from 3 to 5. A hundredfold dilution raises the pH of a strong acid by 2. Diluting an acid never makes its pH exceed 7: very dilute acids approach 7 but stay acidic.
Neutralisation
Neutralisation is the reaction of an acid with a base to give a salt and water: HCl + NaOH → NaCl + H2O. For acids and bases that react one to one, the point of neutrality is reached when moles of acid equal moles of base. Moles = molarity × volume in litres.
Worked example 4: how much alkali?
How much 0.01 M NaOH neutralises 100 mL of 0.02 M HCl? Step 1: moles of HCl = 0.02 × 0.100 = 0.002 mol. Step 2: moles of NaOH needed = 0.002 mol. Step 3: volume = 0.002 ÷ 0.01 = 0.2 L = 200 mL. Acidic water from a mine or factory is treated in the same way, using a cheap alkali such as lime.
pH = −log[H+]. pH 7 is neutral at 25 °C; each unit is tenfold. pH + pOH = 14. Neutralisation: moles of acid = moles of base (one to one).
Key takeaways
- pH below 7 is acidic, 7 is neutral, above 7 is basic; each unit means ten times in [H+].
- Litmus, methyl orange and phenolphthalein show acid or base; universal indicator shows an approximate pH.
- Diluting an acid raises its pH towards 7 but never beyond it.
- At neutralisation, moles of acid equal moles of base for a one-to-one reaction.
Check your understanding
-
1. The pH of a 0.001 M solution of hydrochloric acid (fully ionised) is:
- 1
- 7
- 11
- 3
Show answer
Answer: D. [H+] = 10^−3, so pH = 3.
-
2. A water sample has pH 9 at 25 °C. Its hydroxide ion concentration is:
- 10^−9 mol/L
- 10^−5 mol/L
- 10^−7 mol/L
- 10^−14 mol/L
Show answer
Answer: B. pOH = 14 − 9 = 5, so [OH−] = 10^−5 mol/L.
-
3. Compared with a solution of pH 5, a solution of pH 3 has a hydrogen-ion concentration that is:
- 2 times greater
- 20 times greater
- 100 times greater
- 1000 times greater
Show answer
Answer: C. A difference of 2 pH units is a factor of 10^2 = 100.
-
4. A drop of phenolphthalein is added to lime water (a base). The colour becomes:
- Colourless
- Pink
- Red
- Yellow
Show answer
Answer: B. Phenolphthalein is colourless in acid and pink in base.
-
5. What volume of 0.01 M NaOH neutralises 100 mL of 0.02 M HCl?
- 50 mL
- 100 mL
- 400 mL
- 200 mL
Show answer
Answer: D. Moles of HCl = 0.02 × 0.100 = 0.002 mol. Volume of NaOH = 0.002 ÷ 0.01 = 0.2 L = 200 mL.
Sign in to keep track of the lessons you finish.