Revision notes

Water Chemistry: Foundation

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Water: the molecule and its special properties

Water, H2O, has molar mass 18. Hydrogen : oxygen by mass = 1 : 8. Electrolysis gives hydrogen : oxygen = 2 : 1 by volume. Hydrogen bonding explains water's high boiling point and why ice floats.

— Rule to remember

Water is a bent, polar molecule. Its fixed composition is 11.1% hydrogen and 88.9% oxygen by mass. Hydrogen bonds between molecules give water a high boiling point, a high specific heat and a lower density as ice than as liquid, which is why lakes freeze from the top. Keep the 18 g per mole figure ready: almost every water calculation starts with it.

Read the full lesson

Lesson 2

Water as a solvent and its chemical reactions

Pure water is neutral, pH 7 at 25 °C. Metal oxides + water give bases; non-metal oxides + water give acids. Active metals + water give a hydroxide and hydrogen gas.

— Rule to remember

Water dissolves ionic and polar substances because its molecules are polar. It is amphoteric: it gives H+ to ammonia and takes H+ from hydrogen chloride. Reactive metals free hydrogen from water, metal oxides make bases and non-metal oxides make acids. White anhydrous copper sulphate turning blue is the simple test for water.

Read the full lesson

Lesson 3

Hard and soft water

The two kinds of hardness
TypeCaused byRemoved by boiling?
TemporaryCalcium and magnesium hydrogencarbonates: Ca(HCO3)2, Mg(HCO3)2Yes
PermanentCalcium and magnesium chlorides and sulphates: CaCl2, MgCl2, CaSO4, MgSO4No

Hardness = calcium and magnesium salts. Hydrogencarbonates give temporary hardness (boiling removes it); chlorides and sulphates give permanent hardness (needs washing soda, ion exchange or Calgon).

— Rule to remember

Only calcium and magnesium salts make water hard. Learn the two groups: hydrogencarbonates are temporary, chlorides and sulphates are permanent. Boiling and Clark's method deal with temporary hardness; washing soda and ion exchange deal with both. Detergents beat hard water because their calcium salts dissolve.

Read the full lesson

Lesson 4

Making water safe to drink

Matching the method to the problem
ProblemMethods that workMethods that do not
Mud and suspended dirtSedimentation, alum, filtrationChlorination alone
GermsChlorination, ozone, UV light, boilingSand filtration alone, alum alone
Dissolved saltsDistillation, reverse osmosisBoiling, filtration, chlorination

Screen, settle, coagulate with alum, filter, then disinfect. Filtration removes particles but not germs; chlorine and boiling kill germs but do not remove dissolved salts; distillation removes dissolved salts.

— Rule to remember

Each treatment step has one job. Alum makes fine particles clump and settle. Chlorine works through hypochlorous acid, HOCl, and leaves protection in the pipes. Ozone and UV light also kill germs. Boiling kills germs at home, but only distillation or reverse osmosis removes dissolved salts.

Read the full lesson

Lesson 5

Water pollution and water quality

Common pollutants and their effects
PollutantMain harm
MercuryMinamata disease: damage to the nervous system
CadmiumItai-itai disease: painful, weak bones
LeadDamage to the nervous system, especially in children
Arsenic (in some groundwater)Skin lesions and other long-term illness
Excess fluorideFluorosis: mottled teeth and stiff bones
Excess nitrateBlue baby syndrome in infants: blood carries less oxygen

High BOD = much organic pollution = little oxygen left for fish. Nitrates and phosphates cause eutrophication. Mercury: Minamata disease; cadmium: itai-itai disease; excess fluoride: fluorosis; excess nitrate: blue baby syndrome.

— Rule to remember

Water quality depends on oxygen, organic load and harmful chemicals. BOD measures how much oxygen microbes need, so a high BOD signals sewage-type pollution. Fertiliser runoff leads to eutrophication and fish deaths. Learn the pollutant and disease pairs as a set, and remember that warm water holds less oxygen.

Read the full lesson

Lesson 6

Water in nature: the water cycle, sources of water and why natural water is never pure

Sources of water
SourceWhat it picks upResult
RainDissolves carbon dioxide from the air, giving a very weak acid (carbonic acid); also dustAlmost pure but slightly acidic
RiverMud and silt, organic matter, dissolved salts from soil and rocks, and wasteVariable, often cloudy
LakeDissolved salts and plant material; settles clear if stillOften softer than groundwater
Groundwater (well, borewell)Calcium and magnesium salts from rocks as the water seeps throughClear but often hard
Sea waterSalts carried by rivers over a very long time, left behind when water evaporatesToo salty to drink

Evaporation, condensation, precipitation, runoff. Rain is nearly pure but slightly acidic; groundwater is often hard; sea water is salty. 1 m³ = 1000 L and 1 L of water weighs about 1 kg.

  • The Sun drives the water cycle through evaporation and transpiration.
  • Natural water always carries dissolved substances picked up on its path.
  • Groundwater is clear but often hard; rain is soft and slightly acidic.
  • 1 m³ of water is 1000 L, with a mass of about 1000 kg.
Read the full lesson

Lesson 7

Testing water: pH, indicators and neutralisation

Common indicators
IndicatorIn acidIn base
LitmusRedBlue
Methyl orangeRedYellow
PhenolphthaleinColourlessPink
Universal indicatorA range of colours, red for strong acid to violet for strong base, green for neutral(same indicator)

pH = −log[H+]. pH 7 is neutral at 25 °C; each unit is tenfold. pH + pOH = 14. Neutralisation: moles of acid = moles of base (one to one).

  • pH below 7 is acidic, 7 is neutral, above 7 is basic; each unit means ten times in [H+].
  • Litmus, methyl orange and phenolphthalein show acid or base; universal indicator shows an approximate pH.
  • Diluting an acid raises its pH towards 7 but never beyond it.
  • At neutralisation, moles of acid equal moles of base for a one-to-one reaction.
Read the full lesson

Lesson 8

Measuring what is in water: ppm, mg/L, total dissolved solids and simple dilution

Units for small amounts
UnitMeaningEquivalent
mg/Lmilligrams of solute in 1 litre of water1 mg/L = 1 ppm for water
ppmparts per million by mass1 ppm = 0.0001%
Percentageparts per hundred1% = 10,000 ppm
g/Lgrams per litre1 g/L = 1000 mg/L = 1000 ppm

For water, 1 ppm = 1 mg/L. 1% = 10,000 ppm. Mass of solute = concentration (mg/L) × volume (L). TDS = mass of residue ÷ volume of sample.

  • ppm and mg/L mean the same for dilute aqueous solutions.
  • Convert grams to milligrams (×1000) and keep the volume in litres.
  • TDS is found by evaporating a known volume and weighing the residue.
  • Limits for drinking water are set by authorities; check units when you read a report.
Read the full lesson

Lesson 9

Using water wisely: sewage treatment, rainwater harvesting and desalination

Sewage: primary removes solids, secondary uses microbes to cut BOD, tertiary polishes and disinfects. Harvested volume = roof area × rainfall depth × capture fraction. Distillation needs heat; reverse osmosis needs pressure.

  • Sewage is treated in stages: solids first, then microbes for organic matter, then disinfection.
  • Rainwater harvesting stores rain or recharges groundwater.
  • Distillation and reverse osmosis remove dissolved salts.
  • Choose a method by asking what has to be removed.
Read the full lesson

Privacy · Terms · Refunds · Delivery