• Practice
  • About 17 min
  • 5 practice questions

Landfills and incineration: leachate, gas and capacity sums

Estimate leachate volume, landfill life and incinerator energy output from illustrative data, and explain landfill gas and incineration pollutants.

If something looks wrong, please tell us.

The disposal end of the hierarchy produces the most calculation questions: how much leachate a landfill makes, how long it will last, how much electricity an incinerator yields. The concepts behind them - why landfills make methane, why burning plastics needs care - are tested alongside. This lesson pairs each concept with its sum.

Leachate: where it comes from

Leachate forms when water percolates through waste. Most of that water is rain falling on the open face of the landfill; some comes from moisture in the waste itself. A simple estimate is: leachate volume = rainfall depth x area x fraction of rain that percolates. Daily soil cover, a sloped surface that sheds runoff, and finally an impermeable cap all reduce the fraction that soaks in. Because waste keeps decomposing, a landfill can produce leachate for decades after it closes, which is why the liner and collection system must last.

Landfill gas

Inside a compacted landfill, oxygen is quickly used up, so organic waste decomposes anaerobically. The result is landfill gas, made mainly of methane and carbon dioxide. Methane is a powerful greenhouse gas and is flammable, so uncontrolled landfills risk fires and explosions; engineered landfills collect the gas to flare it or burn it for energy. The trap: landfill gas comes from biodegradable waste, so keeping organic waste out of landfills by composting cuts both leachate strength and methane.

Capacity: from tonnes to cubic metres

Landfill space is volume, but waste is weighed in tonnes. Convert with compacted density: volume = mass / density. If daily soil cover takes up extra space, add it as a share of the waste volume. Then life = available volume / volume used per day.

Incineration: energy and emissions

Energy from an incinerator = mass burnt x calorific value x efficiency. Mixed waste with lots of wet food has a low calorific value, so it gives little energy. To convert, 1 kilowatt-hour (kWh) = 3.6 megajoules (MJ). Incineration greatly reduces volume, but it leaves bottom ash and finer fly ash caught by the gas-cleaning system; fly ash can hold toxic metals and needs careful disposal. Burning chlorine-containing plastics such as PVC at too low a temperature, or in open fires, can form dioxins and furans, highly toxic pollutants. Well-run plants burn at high temperature and clean their flue gases for this reason.

Worked example 1: landfill life

Illustrative figures: a town sends 200 tonnes a day to a landfill; compacted density is 0.8 tonnes per cubic metre; daily cover adds 20% to the volume. Waste volume = 200 / 0.8 = 250 cubic metres a day. With cover: 250 x 1.2 = 300 cubic metres a day. If the site has 5,47,500 cubic metres available, life = 5,47,500 / 300 = 1,825 days = 5 years.

Worked example 2: leachate and energy

Illustrative leachate: an open landfill area of 3 hectares (30,000 square metres) receives 0.8 metres of rain a year, and 30% percolates. Leachate = 0.8 x 30,000 x 0.30 = 7,200 cubic metres a year. Illustrative energy: an incinerator burns 100 tonnes a day of waste with calorific value 8 MJ per kg at 25% efficiency. Energy in = 1,00,000 kg x 8 = 8,00,000 MJ. Electricity = 0.25 x 8,00,000 = 2,00,000 MJ = 2,00,000 / 3.6, about 55,600 kWh a day, an average output of about 55,600 / 24, roughly 2.3 megawatts.

Leachate = rainfall x area x percolating fraction. Landfill volume = mass / density (plus cover). Energy = mass x calorific value x efficiency; 1 kWh = 3.6 MJ.

Key takeaways

  • Cover and capping cut leachate; it continues long after closure.
  • Anaerobic decay makes landfill gas: methane plus carbon dioxide.
  • Keep units straight: tonnes to cubic metres by density, MJ to kWh by 3.6.
  • Burning PVC badly can form dioxins and furans; fly ash needs careful disposal.

Key takeaways: write the formula, put in units at each step, and check that the answer's unit matches what is asked.

Check your understanding

  1. 1. Illustrative figures: an open landfill area of 2 hectares receives 1 metre of rain a year, and 25% of it percolates. How much leachate forms each year?

    1. 20,000 cubic metres
    2. 500 cubic metres
    3. 5,000 cubic metres
    4. 50,000 cubic metres
    Show answer

    Answer: C. 2 ha = 20,000 square metres. Leachate = 1 x 20,000 x 0.25 = 5,000 cubic metres. 20,000 ignores the percolating fraction.

  2. 2. Illustrative figures: 120 tonnes of waste a day is compacted to a density of 0.6 tonnes per cubic metre. What volume does it occupy each day (ignore cover)?

    1. 72 cubic metres
    2. 200 cubic metres
    3. 120 cubic metres
    4. 720 cubic metres
    Show answer

    Answer: B. Volume = mass / density = 120 / 0.6 = 200 cubic metres. 72 comes from multiplying instead of dividing.

  3. 3. Why is landfill gas made mainly of methane and carbon dioxide?

    1. Plastics break down into methane in sunlight
    2. Oxygen is pumped into landfills to make methane
    3. Metals react with rain to form methane
    4. Organic waste decomposes without oxygen deep inside the compacted waste
    Show answer

    Answer: D. Compaction and cover use up oxygen, so microbes break down organic waste anaerobically, producing methane and carbon dioxide.

  4. 4. Which pollutants are of special concern when chlorine-containing plastics such as PVC are burnt at low temperatures?

    1. Pure oxygen
    2. Helium and neon
    3. Water vapour only
    4. Dioxins and furans
    Show answer

    Answer: D. Poor, low-temperature burning of chlorinated plastics can form dioxins and furans, which are highly toxic. That is why incinerators burn hot and clean their flue gas.

  5. 5. Illustrative figures: an incinerator burns 50 tonnes of waste a day with calorific value 9 MJ per kg at 20% efficiency. How much electricity does it produce daily?

    1. 90,000 kWh
    2. 1,25,000 kWh
    3. 25,000 kWh
    4. 2,500 kWh
    Show answer

    Answer: C. Energy in = 50,000 kg x 9 = 4,50,000 MJ. Electricity = 0.20 x 4,50,000 = 90,000 MJ = 90,000 / 3.6 = 25,000 kWh. 90,000 is the MJ figure, not kWh.

Privacy · Terms · Refunds · Delivery