- Practice
- About 17 min
- 5 practice questions
Special streams: plastics, e-waste, biomedical and hazardous waste, and EPR
Identify plastic resin codes, toxic metals in e-waste, true biomedical waste and the international conventions, and work out an illustrative EPR obligation.
If something looks wrong, please tell us.
The special waste streams are where most factual traps lie. Is a hospital canteen's waste biomedical? Which plastic is code 3? Which convention deals with hazardous waste crossing borders? This lesson organises the facts that do not change and adds one calculation on extended producer responsibility.
Plastics: codes, types and traps
Plastic items often carry a resin identification code - a number from 1 to 7 inside a triangle of arrows - that tells recyclers which polymer they are made of. The triangle does not by itself mean the item is recyclable everywhere; it identifies the material. Thermoplastics soften on heating and can be mechanically recycled; thermosets such as Bakelite and melamine cannot be remelted. Multilayered packaging, which bonds layers of different plastics and often foil, is hard to separate and recycle. Plastic pieces smaller than about 5 mm are commonly called microplastics. A further trap: 'biodegradable' or 'compostable' plastics often break down well only under the controlled heat of industrial composting, not in a home pit, a drain or the sea.
| Code | Polymer | Typical use |
|---|---|---|
| 1 | PET (polyethylene terephthalate) | Drink bottles |
| 2 | HDPE (high-density polyethylene) | Milk and detergent containers |
| 3 | PVC (polyvinyl chloride) | Pipes, cables |
| 4 | LDPE (low-density polyethylene) | Thin films, carry bags |
| 5 | PP (polypropylene) | Food tubs, bottle caps |
| 6 | PS (polystyrene) | Foam packaging, disposable cups |
| 7 | Others | Mixed or other polymers |
E-waste: urban mine and toxic store
E-waste is sometimes called an 'urban mine' because it holds copper, aluminium, gold, silver and other metals worth recovering. It also holds toxic substances: lead in old cathode-ray-tube glass and in solder, mercury in some lamps and old flat-screen backlights, and cadmium in nickel-cadmium rechargeable batteries. Informal recycling - open burning of cables, acid baths to dissolve metals from circuit boards - releases these into air, soil and water and harms workers. Formal recycling dismantles and processes them under control.
Biomedical and hazardous waste
Biomedical waste is what comes from diagnosis, treatment or immunisation of humans or animals and related research: sharps, dressings, anatomical waste, cultures, discarded medicines. Food from a hospital kitchen or paper from its office is general municipal waste - the classic trap. Biomedical waste is segregated where it is produced, disinfected (for example by autoclaving), and some kinds are incinerated. Hazardous waste is defined by being toxic, flammable, corrosive or reactive (and infectious waste is treated alongside).
Four international conventions are linked to these streams. The Basel Convention (1989) controls the movement of hazardous wastes across borders and their disposal. The Rotterdam Convention (1998) sets a prior informed consent procedure for trade in certain hazardous chemicals and pesticides. The Stockholm Convention (2001) targets persistent organic pollutants. The Minamata Convention (2013) addresses mercury.
Extended producer responsibility in numbers
Under EPR a producer is responsible for its products after use, often expressed as an obligation to collect or ensure recycling of a share of what it places on the market. The numbers below are purely illustrative; actual targets are set by the rules in force and change over time.
Worked example 1: an illustrative EPR obligation
Suppose a brand puts 1,000 tonnes of plastic packaging on the market and its illustrative obligation is to ensure collection of 60%. Obligation = 0.60 x 1,000 = 600 tonnes. If it arranges collection of 450 tonnes, its shortfall is 600 - 450 = 150 tonnes, which is 25% of the obligation (150 / 600).
Worked example 2: sorting a mixed load
A collection drive brings in: a PET bottle, a PVC pipe offcut, a nickel-cadmium battery, a used syringe from a clinic, leftover rice from a hospital kitchen and an old router. PET (code 1) and PVC (code 3) are recyclable thermoplastics, but PVC must never be burnt in the open. The battery is hazardous because of cadmium. The syringe is biomedical (sharp). The rice is ordinary biodegradable municipal waste despite its hospital origin. The router is e-waste.
Code 1 PET, 2 HDPE, 3 PVC, 4 LDPE, 5 PP, 6 PS, 7 others. Basel - hazardous waste across borders; Rotterdam - prior informed consent; Stockholm - persistent organic pollutants; Minamata - mercury.
Key takeaways
- The resin code names the polymer; it is not a promise of recycling.
- E-waste: valuable metals plus lead, mercury and cadmium.
- Only treatment-related hospital waste is biomedical.
- EPR obligations are shares of what a producer places on the market.
Key takeaways: anchor each special stream on what makes it special - polymer type, toxic metal, infection risk - and match conventions by their single subject.
Check your understanding
-
1. Which polymer carries resin identification code 3?
- PET
- PVC
- HDPE
- Polystyrene
Show answer
Answer: B. Code 3 is polyvinyl chloride (PVC). PET is 1, HDPE is 2 and polystyrene is 6.
-
2. Leftover food from a hospital's kitchen is best classified as
- Biomedical waste
- Hazardous chemical waste
- General biodegradable municipal waste
- E-waste
Show answer
Answer: C. Biomedical waste comes from diagnosis, treatment, immunisation and related research. Kitchen food waste is ordinary biodegradable waste, whatever building it comes from.
-
3. Which international convention controls the movement of hazardous wastes across national borders?
- Minamata Convention
- Stockholm Convention
- Rotterdam Convention
- Basel Convention
Show answer
Answer: D. The Basel Convention (1989) deals with transboundary movement of hazardous wastes and their disposal. Minamata covers mercury, Stockholm persistent organic pollutants, and Rotterdam prior informed consent in chemical trade.
-
4. Illustrative figures: a company places 800 tonnes of packaging on the market, has an illustrative EPR obligation of 70%, and arranges collection of 420 tonnes. What is its shortfall?
- 140 tonnes
- 560 tonnes
- 380 tonnes
- 240 tonnes
Show answer
Answer: A. Obligation = 0.70 x 800 = 560 tonnes. Shortfall = 560 - 420 = 140 tonnes. 380 compares 420 with the full 800.
-
5. Nickel-cadmium rechargeable batteries are hazardous mainly because they contain
- Cadmium
- Calcium
- Sodium
- Magnesium
Show answer
Answer: A. Cadmium is a toxic heavy metal, which is why these batteries must be kept out of ordinary waste.
Sign in to keep track of the lessons you finish.