Revision notes

Waste Management: Practice

The key points, rules to remember, tables and diagrams from all 9 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Classifying waste: exam traps and composition sums

Biodegradable, hazardous and recyclable are separate questions. In moisture sums, dry solids never change: new mass = dry solids / (1 - new moisture fraction).

  • Place each item on three scales: source, biodegradability and hazard.
  • Glass and metals are non-biodegradable but highly recyclable.
  • Convert percentages by grouping first, multiplying once.
  • For drying, fix the dry solids and divide by the new solid fraction.

Key takeaways: slow down on the wording of classification questions and anchor every moisture sum on the dry solids.

Read the full lesson

Lesson 2

The waste hierarchy in practice: ranking options and diversion rates

Reuse keeps the material as it is; recycling reprocesses it; recovery keeps only energy. Always check whether a rate is of waste generated or of waste collected.

  • Composting counts with recycling; waste-to-energy is recovery.
  • Reuse versus recycle: was the material reprocessed?
  • Downcycling gives a lower-grade product.
  • The same tonnage gives a lower rate against waste generated than against waste collected.

Key takeaways: identify the step by asking what happens to the material, and write the fraction with its correct denominator before you divide.

Read the full lesson

Lesson 3

Composting calculations: C:N ratio, moisture and yield

C:N of a mix = total carbon / total nitrogen, never the average of the ratios. Aim for roughly 25-30:1 and 50-60% moisture; ammonia means too much nitrogen, rotten-egg smell means too wet or too little air.

  • Greens are nitrogen-rich; browns are carbon-rich.
  • Add carbon and nitrogen separately to get the mixture's ratio.
  • Moisture of a mix is total water divided by total mass.
  • A hot phase sanitises the compost; turning restores air.

Key takeaways: set up composting sums as totals of carbon, nitrogen and water, and read smells as clues to which one is out of balance.

Read the full lesson

Lesson 4

Landfills and incineration: leachate, gas and capacity sums

Leachate = rainfall x area x percolating fraction. Landfill volume = mass / density (plus cover). Energy = mass x calorific value x efficiency; 1 kWh = 3.6 MJ.

  • Cover and capping cut leachate; it continues long after closure.
  • Anaerobic decay makes landfill gas: methane plus carbon dioxide.
  • Keep units straight: tonnes to cubic metres by density, MJ to kWh by 3.6.
  • Burning PVC badly can form dioxins and furans; fly ash needs careful disposal.

Key takeaways: write the formula, put in units at each step, and check that the answer's unit matches what is asked.

Read the full lesson

Lesson 5

Special streams: plastics, e-waste, biomedical and hazardous waste, and EPR

CodePolymerTypical use
1PET (polyethylene terephthalate)Drink bottles
2HDPE (high-density polyethylene)Milk and detergent containers
3PVC (polyvinyl chloride)Pipes, cables
4LDPE (low-density polyethylene)Thin films, carry bags
5PP (polypropylene)Food tubs, bottle caps
6PS (polystyrene)Foam packaging, disposable cups
7OthersMixed or other polymers

Code 1 PET, 2 HDPE, 3 PVC, 4 LDPE, 5 PP, 6 PS, 7 others. Basel - hazardous waste across borders; Rotterdam - prior informed consent; Stockholm - persistent organic pollutants; Minamata - mercury.

  • The resin code names the polymer; it is not a promise of recycling.
  • E-waste: valuable metals plus lead, mercury and cadmium.
  • Only treatment-related hospital waste is biomedical.
  • EPR obligations are shares of what a producer places on the market.

Key takeaways: anchor each special stream on what makes it special - polymer type, toxic metal, infection risk - and match conventions by their single subject.

Read the full lesson

Lesson 6

Biogas sums: dung and gas, dilution by solids, retention time and energy

Solids never change on dilution: dung mass × solids fraction = feed mass × target fraction. Volume = daily feed × retention days. 1 kWh = 3.6 MJ.

Feed equals gas need divided by yield. Dilute using a solids balance. Digester volume is daily feed volume times retention time. Useful energy is gas energy times burner efficiency. A cold digester produces less gas.

Read the full lesson

Lesson 7

Liquid waste sums: sewage flow, BOD load, removal in series and sludge

Load (g/day) = concentration (mg/L) × flow (m³/day). Divide by 1,000 for kg/day. Overall removal in series = 1 − product of (1 − each removal).

1 mg/L equals 1 g/m³, so load equals concentration times flow. Overall removal in series multiplies the fractions left. Population equivalent compares a load with one person's load. Sludge volume follows from dry solids divided by the solids fraction.

Read the full lesson

Lesson 8

Recycling sums: contamination, yield, material balance and net revenue

Clean input = bale × (1 − contamination). Product = clean input × process yield. Overall yield = product ÷ bale. Net revenue = product × price − purchase cost − processing cost.

Follow the stream step by step: remove contamination, apply yield, then price the product. Overall yield is the product of the yields. Net revenue is revenue less purchase and processing costs. Contamination affects profit more than its percentage suggests because the costs are fixed.

Read the full lesson

Lesson 9

Mixed practice: sequence, matching and multi-stage town problems

Waste and route
WasteSuitable routeWhy
Kitchen scrapsComposting or biogasMicrobes break it down; gives manure or fuel
Clean paper, glass, metalRecyclingBecomes raw material for new products
Used batteries, paint, pesticidesHazardous waste routeToxic, flammable or corrosive contents
Sharps and infectious dressingsBiomedical waste treatmentRisk of infection and injury
Discarded phones and chargersAuthorised e-waste recyclerValuable and toxic materials together
Residue that cannot be reusedEngineered landfillLast resort, with lining and leachate collection

Read the denominator, read what is being ordered, and write each stage's tonnes before calculating.

Identify what is being ordered or matched, keep the different orders apart, and set out multi-stage problems with the tonnes at every stage. Check that the products and the landfill add up to the collected waste, and state the denominator of any rate.

Read the full lesson

Privacy · Terms · Refunds · Delivery