Revision notes

Chapter 4 Effects of electric current: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Energy transfer in a circuit and Joule's law of heating

Joule's law of heating: H = I² R t. Equivalent forms: H = V I t = (V² / R) t. Power: P = V I = I² R = V² / R.

Where the energy goes

  1. Chemical energy in the cell The cell pushes charge round the circuit.
  2. Electrical energy carried by charge Each coulomb carries V joules across the resistor.
  3. Work done in the resistor Energy V Q is delivered in time t.
  4. Heat (and sometimes light) The resistor's temperature rises: H = I² R t.

Key takeaways: the cell supplies energy V Q to the resistor, which becomes heat. Electrical power P = VI, measured in watts (1 W = 1 J/s). Joule's law: H = I²Rt = VIt = V²t/R. Heat depends on the square of the current.

Read the full lesson

Lesson 2

Uses of the heating effect, kilowatt hour and electrical safety

1 kWh = 1000 W × 3600 s = 3.6 × 10⁶ J. Energy (kWh) = Power (kW) × Time (h).

Dangers and safeguards

  • Short circuit
    • Insulation of live and neutral wires wears off, or a device is faulty
    • The two wires touch, resistance becomes very small
    • A very large current flows and produces great heat
    • Nearby wood, cloth or plastic can catch fire
  • Overloading
    • Too many devices draw current at the same time
    • Example: lights, fans and air conditioners on summer evenings
    • The current exceeds what the wiring or transformer can carry
  • Safeguards
    • Fuse wire: melts when the current is too high and breaks the circuit
    • Miniature circuit breaker (MCB): a switch that opens automatically when the current suddenly rises

Key takeaways: heaters use nichrome and bulbs use tungsten because of their high resistivity and suitable heat behaviour. 1 kWh = 3.6 × 10⁶ J is one unit on the bill; energy in kWh = power in kW × time in h. Short circuits and overloading cause dangerously large currents; fuses and MCBs cut off the supply.

Read the full lesson

Lesson 3

Magnetic effect of current: straight wire, loop and solenoid

Right hand thumb rule: hold the conductor in your right hand with the thumb pointing in the direction of the current. Your curled fingers show the direction of the magnetic lines of force. (Also called Maxwell's corkscrew rule.)

Solenoid compared with a bar magnet

  • Solenoid carrying current
    • One end acts as a north pole, the other as a south pole
    • Lines of force inside are parallel to each other
    • Field inside is uniform
    • Field can be switched off and its strength changed with the current
  • Bar magnet
    • Has a north and a south pole
    • Field pattern outside looks the same as a solenoid's
    • Field is permanent
    • Strength cannot be changed easily

Key takeaways: current produces a magnetic field (Oersted, 1820). Around a straight wire the lines are concentric circles, weaker farther away, stronger for larger current; their direction is given by the right hand thumb rule. A loop's field at the centre is strengthened by more turns. A solenoid behaves like a bar magnet with a uniform field inside.

Read the full lesson

Lesson 4

Force on a conductor, Fleming's left hand rule and the electric motor

Fleming's left hand rule: stretch the thumb, index finger and middle finger of the left hand so that they are mutually perpendicular. If the index finger points along the magnetic field and the middle finger along the current, the thumb gives the direction of the force on the conductor.

Parts of a simple electric motor

  • Rectangular coil ABCD
    • Insulated copper wire
    • Sides AB and CD are perpendicular to the magnetic field
  • Magnet
    • Coil placed between its north and south poles
  • Split ring (two halves X and Y)
    • Ends of the coil are joined to the two halves
    • Fixed on the axle with insulation on the inner side
    • Reverses the current in the coil every half turn
  • Carbon brushes (E and F)
    • Stationary
    • Press against the split ring halves to carry current in and out
  • Axle
    • Turns with the coil and drives the fan blade or pump

Key takeaways: a current-carrying conductor in a magnetic field feels a force perpendicular to both the field and the current, found by Fleming's left hand rule. A motor uses this force on a coil; the split ring reverses the current every half turn so rotation continues. A galvanometer uses the same principle to detect small currents and their direction.

Read the full lesson

Lesson 5

Electromagnetic induction, AC and DC, and the electric generator

Faraday's law of induction: whenever the number of magnetic lines of force passing through a coil changes, a current is induced in the coil. This current is called the induced current.

Fleming's right hand rule: stretch the thumb, index finger and middle finger of the right hand mutually perpendicular. The thumb points along the motion of the conductor, the index finger along the magnetic field, and the middle finger then gives the direction of the induced current.

Two rules of Fleming

  • Left hand rule (motor)
    • Used when a current is given and we want the force
    • Index finger: field
    • Middle finger: current
    • Thumb: force or motion
  • Right hand rule (generator)
    • Used when motion is given and we want the induced current
    • Index finger: field
    • Thumb: motion of conductor
    • Middle finger: induced current

Key takeaways: a changing number of magnetic lines through a coil induces a current (Faraday, 1831). Fleming's right hand rule gives its direction. AC reverses direction periodically (50 Hz in India); DC flows one way. A generator turns mechanical energy into electrical energy: slip rings give AC, a split ring gives DC.

Read the full lesson

Privacy · Terms · Refunds · Delivery