- Practice
- About 17 min
- 5 practice questions
Electromagnetic induction, AC and DC, and the electric generator
Explain Faraday's electromagnetic induction, find the direction of induced current with Fleming's right hand rule, compare AC and DC, and describe AC and DC generators.
If something looks wrong, please tell us.
By the end of this lesson you can
- State Faraday's law of induction and describe experiments that produce an induced current.
- Use Fleming's right hand rule to find the direction of an induced current.
- Distinguish AC from DC and explain how AC and DC generators work.
A current produces a magnetic field and a force. Can a magnet produce a current? In 1831, Michael Faraday showed that it can. Faraday (1791-1867) had little formal schooling; he became interested in science while working in a bookbinding shop, later worked with Sir Humphry Davy at the Royal Institution in London, and discovered the laws of electromagnetic induction and of electrolysis.
Producing a current with a magnet
- Connect a copper wire to a galvanometer and move it across the pole of a bar magnet: the pointer deflects. Keep the wire still and move the magnet: it deflects again.
- Place a coil (connected to a galvanometer) near a solenoid connected to a battery and plug key. Switching the solenoid's current on or off makes the pointer jump to one side and return to zero; switching the other way gives a deflection to the other side.
- With a steady current in the solenoid, moving the solenoid towards or away from the coil, or sideways, also produces a current. The faster the movement, the larger the deflection.
Faraday's law of induction: whenever the number of magnetic lines of force passing through a coil changes, a current is induced in the coil. This current is called the induced current.
The induced current is largest when the conductor moves perpendicular to the magnetic field. Its direction is given by Fleming's right hand rule.
Fleming's right hand rule: stretch the thumb, index finger and middle finger of the right hand mutually perpendicular. The thumb points along the motion of the conductor, the index finger along the magnetic field, and the middle finger then gives the direction of the induced current.
Two rules of Fleming
-
Left hand rule (motor)
- Used when a current is given and we want the force
- Index finger: field
- Middle finger: current
- Thumb: force or motion
-
Right hand rule (generator)
- Used when motion is given and we want the induced current
- Index finger: field
- Thumb: motion of conductor
- Middle finger: induced current
Direct current and alternating current
A current that flows in one direction only, like the current from a cell, is direct current (DC); it may increase, stay steady or decrease, but it does not reverse. A current that changes in magnitude and reverses its direction after equal intervals of time is alternating current (AC). AC rises to a maximum, falls to zero, rises to a maximum in the opposite direction and falls to zero again, in a smooth wave; its symbol is ~.
In India, AC from power stations has a frequency of 50 Hz: it completes 50 cycles every second, so one cycle takes 1/50 s. The supply to our homes is AC. AC is preferred for sending power over long distances because the power loss in transmission can be kept small.
The AC generator
A generator converts mechanical energy into electrical energy by rotating a coil in a magnetic field. A coil ABCD sits between the poles of a magnet. Its two ends are joined to two separate conducting rings, R₁ and R₂, fixed on the axle (insulated from it). Stationary carbon brushes B₁ and B₂ press on the rings and lead to the outer circuit. The axle is turned by an outside machine.
- As the coil turns, side AB moves up and CD moves down through the field. By the right hand rule, current is induced along A to B and C to D, so it flows A, B, C, D round the coil and out through the brushes.
- After half a turn, AB and CD have swapped places, so the induced current now flows D, C, B, A.
- Each end of the coil always touches the same brush, so the current in the outer circuit reverses every half turn: this is alternating current.
- A coil of many turns gives a current many times larger.
The DC generator
To get a current that does not reverse in the outer circuit, the two rings are replaced by a split ring, as in the motor. Now the side of the coil that is moving up is always connected to the same brush, and the side moving down to the other. So the current in the outer circuit always flows in one direction: direct current.
Worked example: AC or DC? Motor or generator?
- A device has a coil, a magnet and a split ring, and a battery is connected to it: it is a DC motor (electrical to mechanical).
- A device has a coil, a magnet and two full rings, and its axle is turned by a water turbine: it is an AC generator (mechanical to electrical).
- A time of one AC cycle is 1/50 s = 0.02 s at 50 Hz, so the current changes direction twice in that time, that is, 100 times a second.
Key takeaways: a changing number of magnetic lines through a coil induces a current (Faraday, 1831). Fleming's right hand rule gives its direction. AC reverses direction periodically (50 Hz in India); DC flows one way. A generator turns mechanical energy into electrical energy: slip rings give AC, a split ring gives DC.
Check your understanding
-
1. Electromagnetic induction means:
- Charging a conductor by rubbing
- Producing a magnetic field by a current in a coil
- Generating a current in a coil due to relative motion between the coil and a magnet
- Rotation of a coil in a motor
Show answer
Answer: C. When the magnetic lines of force through a coil change, for example by moving a magnet and coil relative to each other, a current is induced. That is electromagnetic induction.
-
2. In Fleming's right hand rule, the middle finger gives the direction of the:
- Induced current
- Magnetic field
- Motion of the conductor
- Force on the conductor
Show answer
Answer: A. Right hand rule: thumb = motion of the conductor, index finger = magnetic field, middle finger = induced current.
-
3. The frequency of AC supply in India is 50 Hz. How long does one cycle take?
- 0.5 s
- 50 s
- 0.2 s
- 0.02 s
Show answer
Answer: D. Time for one cycle = 1 / frequency = 1/50 s = 0.02 s.
-
4. Which part makes a generator give direct current instead of alternating current?
- Two full conducting rings
- A split ring
- A stronger magnet
- More turns in the coil
Show answer
Answer: B. With a split ring, the brush connections swap every half turn, so the current in the outer circuit always flows one way. Two full rings give AC.
-
5. A galvanometer connected to a coil shows a deflection only while a magnet is moving near it. Why?
- The magnet loses its magnetism when still
- The galvanometer works only for moving magnets
- A current is induced only while the number of magnetic lines through the coil is changing
- The coil heats up when the magnet moves
Show answer
Answer: C. By Faraday's law, a current is induced only when the magnetic lines passing through the coil change. A still magnet gives an unchanging field and no induced current.
Sign in to keep track of the lessons you finish.