- Practice
- About 16 min
- 5 practice questions
Force on a conductor, Fleming's left hand rule and the electric motor
Show that a current-carrying conductor in a magnetic field experiences a force, find its direction with Fleming's left hand rule, and explain how an electric motor and a galvanometer work.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the force on a current-carrying conductor placed in a magnetic field.
- Use Fleming's left hand rule to find the direction of that force.
- Explain the construction and working of an electric motor, including the split ring and carbon brushes.
A current makes a magnetic field. So if a current-carrying wire is placed in the field of another magnet, the two fields interact and the wire is pushed. This push drives every electric fan, mixer and pump.
The force on a current-carrying conductor
Hang a flexible copper wire between the poles of a strong horseshoe magnet. With no current the wire hangs straight. When current flows, the wire moves sideways. Reverse the current and it moves the other way. Reverse the magnet's poles and it also moves the other way. The force is perpendicular to both the magnetic field and the current, and it is largest when the current is perpendicular to the field.
Fleming's left hand rule: stretch the thumb, index finger and middle finger of the left hand so that they are mutually perpendicular. If the index finger points along the magnetic field and the middle finger along the current, the thumb gives the direction of the force on the conductor.
Worked example 1: which way does the wire move?
A horizontal magnetic field points from north to south, which we take as pointing away from you. A wire across the field carries current from left to right. Left hand: index finger away from you (field), middle finger to the right (current). Your thumb points upwards, so the wire is pushed up. If the current is reversed (right to left), the thumb points down.
The electric motor
An electric motor converts electrical energy into mechanical energy. It is used in fans, refrigerators, mixers, washing machines, computers and pumps.
Parts of a simple electric motor
-
Rectangular coil ABCD
- Insulated copper wire
- Sides AB and CD are perpendicular to the magnetic field
-
Magnet
- Coil placed between its north and south poles
-
Split ring (two halves X and Y)
- Ends of the coil are joined to the two halves
- Fixed on the axle with insulation on the inner side
- Reverses the current in the coil every half turn
-
Carbon brushes (E and F)
- Stationary
- Press against the split ring halves to carry current in and out
-
Axle
- Turns with the coil and drives the fan blade or pump
How it works
- Current enters through brush E and half X, and flows from A to B in the coil.
- By Fleming's left hand rule, side AB is pushed down. In side CD the current flows the opposite way, so CD is pushed up. The two forces turn the coil (anticlockwise, say).
- After half a turn, half X touches brush F and half Y touches brush E. The current in the coil reverses: it now flows D to C to B to A.
- The side now on the left is again pushed down and the side on the right pushed up, so the coil keeps turning in the same direction.
- This reversal every half turn keeps the motor rotating continuously.
Without the split ring, the forces would reverse their turning effect every half turn and the coil would just rock back and forth. Commercial motors use the same principle with practical improvements.
The galvanometer
A galvanometer is a sensitive instrument that works on the same principle as a motor. A coil attached to a pointer sits between the poles of a magnet. A small current (for example 1 mA) makes the coil turn through an angle proportional to the current. The pointer can deflect on either side of the zero mark, depending on the direction of the current, so a galvanometer shows both the presence and the direction of a current. Ammeters and voltmeters work on the same principle.
Worked example 2: predicting the effect of changes
A motor's coil turns clockwise. (a) If the current is reversed, the forces reverse and it turns anticlockwise. (b) If the magnet's poles are also swapped, the forces reverse once more, so it turns clockwise again. (c) If more turns are added to the coil or the current is increased, the force on each side grows and the motor turns with more force.
Key takeaways: a current-carrying conductor in a magnetic field feels a force perpendicular to both the field and the current, found by Fleming's left hand rule. A motor uses this force on a coil; the split ring reverses the current every half turn so rotation continues. A galvanometer uses the same principle to detect small currents and their direction.
Check your understanding
-
1. An electric motor converts:
- Mechanical energy into electrical energy
- Electrical energy into mechanical energy
- Heat energy into electrical energy
- Electrical energy into chemical energy
Show answer
Answer: B. A motor uses the force on a current-carrying coil in a magnetic field to produce rotation, converting electrical energy into mechanical energy.
-
2. In Fleming's left hand rule, the middle finger points in the direction of the:
- Force
- Magnetic field
- Motion of the conductor
- Current
Show answer
Answer: D. Index finger: magnetic field. Middle finger: current. Thumb: force on the conductor.
-
3. What is the function of the split ring in an electric motor?
- To reverse the current in the coil every half rotation
- To increase the magnetic field
- To reduce friction
- To store electric charge
Show answer
Answer: A. The split ring changes which brush each end of the coil touches every half turn, reversing the current in the coil so that it keeps rotating in the same direction.
-
4. When is the force on a current-carrying conductor in a magnetic field the greatest?
- When the current is parallel to the field
- When there is no current
- When the current is perpendicular to the field
- When the conductor is outside the field
Show answer
Answer: C. The force is largest when the direction of the current is perpendicular to the direction of the magnetic field, and zero when they are parallel.
-
5. Why can the pointer of a galvanometer deflect on both sides of zero?
- It has two magnets
- It shows the direction of current: the coil turns one way or the other depending on the current's direction
- It measures only alternating current
- It has a spring on each side
Show answer
Answer: B. Reversing the current reverses the force on the coil, so the coil and pointer turn the other way. The side of deflection tells the direction of the current.
Sign in to keep track of the lessons you finish.