• Practice
  • About 15 min
  • 5 practice questions

Latent heat: melting and boiling at constant temperature

Read the temperature-time graph of heating ice to steam, define melting point, boiling point and specific latent heats of fusion and vaporisation, and calculate the heat needed for a change of state.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Explain why the temperature stays constant while ice melts and while water boils.
  • Define specific latent heat of fusion and of vaporisation.
  • Calculate heat absorbed or released during a change of state using Q = m L.

In earlier standards you learnt the difference between heat and temperature, the ways heat is transferred, and how substances expand when heated. This chapter explains several things you see every day: why ice keeps a drink cold for so long, why pipes burst in very cold places, why a cold bottle 'sweats', and why some things heat up faster than others.

Heating ice until it boils

Put ice pieces in a beaker with a thermometer and heat steadily, stirring and noting the temperature every minute. A graph of temperature against time looks like a staircase:

Heating ice to steam

  1. Ice + water at 0 °C (flat part) Heat is absorbed but the temperature stays at 0 °C until all the ice melts.
  2. Water warms from 0 °C to 100 °C (rising part) The heat now raises the temperature of the water.
  3. Boiling water + steam at 100 °C (flat part) Heat is absorbed but the temperature stays at 100 °C until all the water becomes steam.
Flat parts of the graph show a change of state at constant temperature.

During melting, the heat absorbed is used to weaken the bonds between the molecules of the solid so that it can become a liquid; it does not raise the temperature. The constant temperature at which a solid becomes a liquid is its melting point (0 °C for ice). In the same way, the heat absorbed during boiling is used to break the bonds between molecules of the liquid so that it becomes a gas. The constant temperature at which a liquid becomes a gas is its boiling point (100 °C for water at normal atmospheric pressure).

Latent heat

'Latent' means hidden: the heat goes in, but the thermometer does not show it. The heat absorbed at constant temperature when a solid changes into a liquid is the latent heat of fusion; when a liquid changes into a gas it is the latent heat of vaporisation.

Specific latent heat = heat absorbed at constant temperature by unit mass during a change of state. Heat needed Q = m × L. For water: L(fusion) = 80 cal/g (about 333 kJ/kg); L(vaporisation) = 540 cal/g (about 2256 kJ/kg).

The same amount of latent heat is given out in the reverse changes: when steam condenses into water, and when water freezes into ice. Different substances have different melting points, boiling points and latent heats, and all of these depend on the atmospheric pressure.

Approximate values for some substances
SubstanceMelting point (°C)Boiling point (°C)
Water0100
Ethyl alcohol-11778
Lead327.51749
Copper10832562

Worked example 1: melting ice

How much heat is needed to melt 50 g of ice at 0 °C into water at 0 °C? Q = m × L(fusion) = 50 × 80 = 4000 cal. The temperature remains 0 °C throughout.

Worked example 2: from ice to steam

How much heat changes 10 g of ice at 0 °C into steam at 100 °C? (Specific heat of water = 1 cal/g °C.) Step 1, melt: 10 × 80 = 800 cal. Step 2, warm water from 0 °C to 100 °C: 10 × 1 × 100 = 1000 cal. Step 3, boil: 10 × 540 = 5400 cal. Total = 800 + 1000 + 5400 = 7200 cal. Notice that boiling needs far more heat than the other two steps together.

Key takeaways: during melting and boiling, heat is absorbed without a rise in temperature; it is used to weaken or break the bonds between molecules. Q = mL. For water, latent heat of fusion is 80 cal/g and of vaporisation 540 cal/g. The same heat is released on freezing and condensing.

Check your understanding

  1. 1. While ice is melting, its temperature stays at 0 °C even though heat is being supplied. Where does the heat go?

    1. It is lost to the air
    2. It weakens the bonds between the molecules so the solid becomes a liquid
    3. It raises the temperature of the beaker only
    4. It is destroyed
    Show answer

    Answer: B. The heat absorbed during melting (latent heat of fusion) is used to weaken the bonds between molecules. It changes the state, not the temperature.

  2. 2. The heat absorbed at constant temperature by unit mass of a liquid when it changes into a gas is called:

    1. Specific heat capacity
    2. Specific latent heat of fusion
    3. Specific latent heat of vaporisation
    4. Dew point
    Show answer

    Answer: C. For liquid to gas, the heat per unit mass at constant temperature is the specific latent heat of vaporisation.

  3. 3. How much heat is needed to change 20 g of water at 100 °C into steam at 100 °C? (L = 540 cal/g)

    1. 10800 cal
    2. 2000 cal
    3. 560 cal
    4. 1600 cal
    Show answer

    Answer: A. Q = m L = 20 × 540 = 10800 cal. The temperature does not change, so only the latent heat is involved.

  4. 4. When water freezes into ice at 0 °C, latent heat is:

    1. Absorbed
    2. Neither absorbed nor given out
    3. Doubled
    4. Given out
    Show answer

    Answer: D. Freezing is the reverse of melting. The same latent heat absorbed in melting is released when the liquid turns back into a solid.

  5. 5. Which part of the heating graph of ice shows water warming from 0 °C to 100 °C?

    1. The first flat part
    2. The rising part between the two flat parts
    3. The second flat part
    4. None of the graph
    Show answer

    Answer: B. Flat parts show a change of state at constant temperature (melting at 0 °C, boiling at 100 °C). The rising part between them is when the liquid water is warming.

Privacy · Terms · Refunds · Delivery