• Practice
  • About 18 min
  • 5 practice questions

Principle of heat exchange and calorimetry

State the principle of heat exchange, use the mixing method with a calorimeter to find a final temperature or a specific heat capacity, and solve problems that combine latent heat and specific heat.

If something looks wrong, please tell us.

By the end of this lesson you can

  • State the principle of heat exchange.
  • Use the mixing method to find a final temperature or a specific heat capacity.
  • Solve heat exchange problems involving melting ice or condensing steam.

Drop a hot iron ball into cold water and, after a while, the ball and the water reach the same temperature. Heat has flowed from the hot body to the cold one. If we can account for all of it, we can calculate unknown temperatures and specific heats.

The principle of heat exchange

When a hot object and a cold object are in contact, the cold one gains heat and its temperature rises; the hot one loses heat and its temperature falls. This continues until both reach the same temperature. If the two are kept inside a box of heat-resistant material, so that no heat enters or leaves, then all the heat lost by one is gained by the other.

Principle of heat exchange: heat lost by the hot object = heat gained by the cold object (when no heat is exchanged with the surroundings).

Mixing method and the calorimeter

A calorimeter is a metal vessel, kept in an insulating jacket, used to measure heat. A hot solid is dropped into water in the calorimeter. Heat flows until the solid, the water and the calorimeter are at the same final temperature. Then:

Balancing the heat

  • Heat lost (Q)
    • By the hot solid
    • Q = m(solid) × c(solid) × (fall in its temperature)
  • Heat gained (Q₁ + Q₂)
    • By the water: Q₁ = m(water) × c(water) × (rise)
    • By the calorimeter: Q₂ = m(cal) × c(cal) × (rise)
Q = Q₁ + Q₂. If the specific heats of water and calorimeter are known, that of the solid can be found.

Worked example 1: mixing hot and cold water

100 g of water at 80 °C is mixed with 300 g of water at 20 °C. Ignore heat lost to the container. Let the final temperature be T. Heat lost by hot water = 100 × 1 × (80 − T). Heat gained by cold water = 300 × 1 × (T − 20). Equate: 100(80 − T) = 300(T − 20), so 8000 − 100T = 300T − 6000, giving 400T = 14000 and T = 35 °C. The final temperature is closer to 20 °C because there is more cold water.

Worked example 2: finding a specific heat

A 200 g metal piece at 100 °C is dropped into 150 g of water at 20 °C in a 50 g aluminium calorimeter (c = 0.2 cal/g °C). The final temperature is 30 °C. Heat gained by water = 150 × 1 × (30 − 20) = 1500 cal. Heat gained by calorimeter = 50 × 0.2 × 10 = 100 cal. Total gained = 1600 cal. Heat lost by metal = 200 × c × (100 − 30) = 14000c. So 14000c = 1600 and c ≈ 0.114 cal/g °C, close to the value for iron.

Worked example 3: steam melting ice

10 g of steam at 100 °C is passed onto a large block of ice at 0 °C. How much ice melts? Heat given by steam condensing = 10 × 540 = 5400 cal. Heat given as that water cools from 100 °C to 0 °C = 10 × 1 × 100 = 1000 cal. Total = 6400 cal. Ice melted = 6400 / 80 = 80 g. Steam carries a lot of latent heat, which is also why a scald from steam is worse than one from boiling water.

Worked example 4: how much steam?

100 g of ice at 0 °C is in an insulated pot. How much steam at 100 °C must be added to get water at 40 °C? Heat gained by ice: melting 100 × 80 = 8000 cal, then warming 100 × 1 × 40 = 4000 cal; total 12000 cal. Heat lost by m grams of steam: condensing 540m, then cooling from 100 °C to 40 °C, 60m; total 600m. Equate: 600m = 12000, so m = 20 g.

Tips for solving heat exchange problems

  • List every body that gains heat and every body that loses heat, including the calorimeter.
  • Use Q = m c ΔT for temperature changes and Q = m L for changes of state.
  • Write ΔT as (higher − lower) so that every heat term is positive.
  • Keep units consistent: grams with cal/g °C, or kilograms with kcal/kg °C.

Key takeaways: heat lost by hot bodies equals heat gained by cold bodies when no heat escapes. In the mixing method, heat lost by the solid equals heat gained by water plus calorimeter. Combine Q = mcΔT and Q = mL when ice melts or steam condenses.

Check your understanding

  1. 1. The principle of heat exchange states that, when no heat is lost to the surroundings:

    1. Heat lost by the hot body = heat gained by the cold body
    2. Temperature lost = temperature gained
    3. The cold body loses heat
    4. Both bodies lose heat
    Show answer

    Answer: A. Heat flows from the hot body to the cold one until their temperatures are equal. In an isolated system the heat lost by one equals the heat gained by the other.

  2. 2. Which property of a substance is commonly measured using the mixing method in a calorimeter?

    1. Density
    2. Specific heat capacity
    3. Boiling point
    4. Relative humidity
    Show answer

    Answer: B. By balancing the heat lost by a hot solid against the heat gained by water and calorimeter, the specific heat capacity of the solid can be calculated.

  3. 3. 200 g of water at 60 °C is mixed with 200 g of water at 20 °C with no heat loss. What is the final temperature?

    1. 80 °C
    2. 30 °C
    3. 40 °C
    4. 50 °C
    Show answer

    Answer: C. 200(60 − T) = 200(T − 20), so 60 − T = T − 20, 2T = 80 and T = 40 °C. With equal masses the final temperature is the average.

  4. 4. How much ice at 0 °C will just melt using 1600 cal of heat? (L = 80 cal/g)

    1. 20 g
    2. 128000 g
    3. 1680 g
    4. 80 g
    Show answer

    Answer: A. m = Q / L = 1600 / 80 = 20 g.

  5. 5. Why does a burn from steam at 100 °C hurt more than one from water at 100 °C?

    1. Steam is hotter than 100 °C
    2. Steam gives out its large latent heat of vaporisation as it condenses on the skin
    3. Water has no heat
    4. Steam has a lower specific heat
    Show answer

    Answer: B. Each gram of steam releases 540 cal of latent heat when it condenses on the skin, in addition to the heat released as the water cools. Boiling water releases only the second part.

Sign in to keep track of the lessons you finish.

Next lesson → Final self-assessment: Heat

Privacy · Terms · Refunds · Delivery