• Practice
  • About 15 min
  • 5 practice questions

Units of heat and specific heat capacity

Define the calorie, kilocalorie and joule, explain why a temperature range is fixed in the definition, define specific heat capacity, and calculate heat using Q = m c ΔT.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Define the calorie and kilocalorie, and convert calories to joules.
  • Explain specific heat capacity and why different substances heat up differently.
  • Calculate heat gained or lost with Q = m × c × ΔT.

On a sunny day, sand on a beach becomes too hot to walk on while the sea water stays pleasantly cool, though both receive the same sunshine. Different substances need different amounts of heat for the same rise in temperature. To compare them, we first need units of heat.

Units of heat

  • The SI unit of heat is the joule (J); the CGS unit is the calorie (cal).
  • 1 calorie is the heat needed to raise the temperature of 1 g of water by 1 °C, from 14.5 °C to 15.5 °C.
  • 1 kilocalorie (kcal) is the heat needed to raise 1 kg of water by 1 °C, from 14.5 °C to 15.5 °C. So 1 kcal = 1000 cal.
  • 1 cal ≈ 4.18 J.

Why fix the range 14.5 °C to 15.5 °C? The heat needed to warm water by 1 °C is slightly different in different temperature ranges, so a definite range must be stated for an exact unit.

The joule is named after James Prescott Joule (1818-1889), who showed that the kinetic energy of the tiny particles of matter appears as heat, and that energy can be converted from one form to another.

Specific heat capacity

Heat equal-mass spheres of iron, copper and lead in boiling water so that all are at 100 °C, then place them on a thick slab of wax. The iron sphere sinks deepest, copper less, and lead the least. All three cooled through the same temperature range, but iron gave out the most heat, so it melted the most wax. Equal masses of different substances absorb (and release) different amounts of heat for the same change in temperature. The property responsible is the specific heat capacity.

Specific heat capacity (c): the heat needed to raise the temperature of unit mass of a substance by 1 °C. Heat gained or lost Q = m × c × ΔT. Units: J/kg °C (SI), cal/g °C (CGS).

Approximate specific heat capacities
Substancec (cal/g °C)
Water1.0
Aluminium0.215
Iron0.11
Copper0.095
Silver0.056
Mercury0.033

Water has a very high specific heat capacity. It warms up and cools down slowly, which is why it is used in hot-water bags and in car radiators, and why the sea stays cooler than the sand during the day.

Worked example 1: heating water

How much heat raises 2 kg of water from 25 °C to 75 °C? Given: m = 2 kg, c = 1 kcal/kg °C, ΔT = 75 − 25 = 50 °C. Q = m c ΔT = 2 × 1 × 50 = 100 kcal. In joules: 100 kcal = 100000 cal ≈ 100000 × 4.18 = 418000 J, that is, 418 kJ.

Worked example 2: heating iron

A 200 g iron block (c = 0.11 cal/g °C) is warmed from 20 °C to 70 °C. Q = 200 × 0.11 × 50 = 1100 cal. The same heat given to 200 g of water would raise its temperature by only 1100 / (200 × 1) = 5.5 °C.

Worked example 3: comparing two objects

Equal heat is given to objects A and B of equal mass. A's temperature rises by 2 °C and B's by 6 °C. From Q = m c ΔT with Q and m the same, c is inversely proportional to ΔT. So c(A) / c(B) = 6 / 2 = 3: A has three times the specific heat capacity of B.

Key takeaways: 1 cal is the heat that warms 1 g of water by 1 °C (14.5 °C to 15.5 °C); 1 kcal = 1000 cal; 1 cal ≈ 4.18 J. Specific heat capacity is the heat per unit mass per °C; Q = m c ΔT. Water's high specific heat makes it heat and cool slowly.

Check your understanding

  1. 1. One calorie is the heat needed to raise the temperature of:

    1. 1 kg of water by 1 °C
    2. 1 g of water by 1 °C, from 14.5 °C to 15.5 °C
    3. 1 g of any substance by 1 °C
    4. 1 g of water from 0 °C to 100 °C
    Show answer

    Answer: B. The calorie is defined for 1 g of water and a 1 °C rise in the fixed range 14.5 °C to 15.5 °C. For 1 kg of water the unit is the kilocalorie.

  2. 2. Equal-mass spheres of iron, copper and lead at 100 °C are placed on wax. The iron sphere sinks deepest. This shows that iron has:

    1. The largest density
    2. The lowest melting point
    3. The largest specific heat capacity of the three
    4. The smallest mass
    Show answer

    Answer: C. All three cool through the same range, but iron gives out the most heat and melts the most wax, so its specific heat capacity is the largest of the three.

  3. 3. How much heat raises the temperature of 500 g of water by 20 °C? (c = 1 cal/g °C)

    1. 25 cal
    2. 520 cal
    3. 1000 cal
    4. 10000 cal
    Show answer

    Answer: D. Q = m c ΔT = 500 × 1 × 20 = 10000 cal (10 kcal).

  4. 4. Equal heat is given to two objects of equal mass. P's temperature rises by 4 °C and Q's by 6 °C. Which has the larger specific heat capacity?

    1. P, by a factor of 3/2
    2. Q, by a factor of 3/2
    3. Both are equal
    4. P, by a factor of 2/3
    Show answer

    Answer: A. With equal heat and mass, c is inversely proportional to the temperature rise. c(P) / c(Q) = 6 / 4 = 3/2, so P has the larger specific heat, 3/2 times that of Q.

  5. 5. Why is water used in hot-water bags?

    1. It is a good conductor of heat
    2. It boils quickly
    3. It has a high specific heat capacity, so it gives out heat slowly over a long time
    4. It has a low specific heat capacity
    Show answer

    Answer: C. Water stores a lot of heat per degree and releases it slowly as it cools, so a hot-water bag stays warm for a long time.

Privacy · Terms · Refunds · Delivery