Revision notes

Chapter 5 Towards Green Energy: Foundation

The key points, rules to remember, tables and diagrams from all 5 lessons, on one page for quick revision. To keep a copy, use your browser's Print and choose "Save as PDF".

Lesson 1

Energy, electromagnetic induction and the generator

DeviceElectrical energy converted into
Electric fan, mixer, motor pumpMechanical (kinetic) energy
Bulb, LED lampLight energy
Electric iron, heater, geyserHeat energy
Speaker, bellSound energy
Charging a batteryChemical energy

How most power stations generate electricity

  1. Energy source Coal, nuclear fuel, natural gas, water, wind or sunlight.
  2. Turbine Turned by steam, hot gas, water or wind.
  3. Generator A rotating magnet changes the field around coils.
  4. Electrical energy Produced by electromagnetic induction.
Power stations differ mainly in the energy source, and so in the design of the turbine.

Electromagnetic induction (Faraday): a changing magnetic field around a conductor produces a potential difference across it. Energy source → turbine → generator → electricity.

  • Energy can change form; electricity is convenient because it converts easily into other forms.
  • Electromagnetic induction: a changing magnetic field induces a potential difference.
  • Generators rotate a magnet (or move a conductor) to produce electricity.
  • Turbines are driven by an energy source; their design depends on that source.
Read the full lesson

Lesson 2

Thermal and natural gas power plants

Working of a thermal power plant

  1. Coal burns In the boiler furnace; waste gases leave through the tall stack.
  2. Boiler Water becomes high-pressure, high-temperature steam.
  3. Steam turbine Steam spins the turbine blades.
  4. Generator Produces electricity.
  5. Condenser Steam is cooled back to water and returned to the boiler.

Energy changes in a thermal power plant

  1. Chemical energy in coal
  2. Thermal energy
  3. Kinetic energy of steam
  4. Kinetic energy of turbine
  5. Electrical energy

Natural gas power plant

  1. Compressor Supplies pressurised air.
  2. Combustion chamber Natural gas burns in the air.
  3. Gas turbine Driven by the hot, high-pressure gases.
  4. Generator Produces electrical energy.
Energy: chemical energy in gas → kinetic energy of hot gases → kinetic energy of turbine → electrical energy.

Thermal plant: chemical → thermal → kinetic (steam) → kinetic (turbine) → electrical. Gas plants are more efficient and, with no sulphur in the fuel, pollute less.

  • Boiler, steam turbine, generator, condenser and cooling tower are the main parts of a thermal plant; the stack releases flue gases.
  • Coal plants emit CO2, sulphur and nitrogen oxides and soot; coal is limited.
  • A gas plant uses a compressor, combustion chamber and gas turbine.
  • Gas plants are more efficient and less polluting than coal plants.
Read the full lesson

Lesson 3

Nuclear power and the environmental cost of conventional electricity

U-235 + neutron → U-236 → Ba-141 + Kr-92 + 3 neutrons + about 200 MeV of energy

A chain reaction grows quickly

  1. Generation 1 1 fission → 3 neutrons
  2. Generation 2 3 fissions → 9 neutrons
  3. Generation 3 9 fissions → 27 neutrons
  4. Generation 4 27 fissions → 81 neutrons
If every neutron caused fission, the number would triple at each step; control keeps it steady.

Energy changes in a nuclear power plant

  1. Nuclear energy
  2. Thermal energy
  3. Kinetic energy of steam
  4. Kinetic energy of turbine
  5. Electrical energy

Nuclear power: for and against

  • Advantages
    • Burns no fossil fuel
    • No air pollution from combustion
    • A good source if enough nuclear fuel is available
  • Problems
    • Fission products are radioactive nuclear waste
    • Safe disposal of the waste is a major challenge
    • An accident can release very harmful radiation
  • Fission of U-235 forms barium, krypton, 3 neutrons and about 200 MeV.
  • The chain reaction must be controlled in a power plant.
  • Nuclear plants avoid air pollution but produce radioactive waste and carry accident risk.
  • Fossil and nuclear electricity are not environment friendly: pollution, global warming, acid rain, limited reserves and waste.
Read the full lesson

Lesson 4

Green energy: hydroelectric and wind power

Conventional and green sources of electricity

  • Not environment friendly
    • Coal, natural gas, nuclear fuel
    • Limited reserves
    • Pollution, global warming or radioactive waste
  • Green energy
    • Water, wind, sunlight, biofuels
    • Never-ending (renewable)
    • No combustion pollution

Energy changes in a hydroelectric plant

  1. Potential energy of stored water
  2. Kinetic energy of flowing water
  3. Kinetic energy of turbine
  4. Electrical energy

Hydroelectric power: for and against

  • Advantages
    • No fuel burnt, so no combustion pollution
    • Electricity whenever needed, if water is stored
    • Reservoir refills in the rainy season
  • Problems
    • Back-water can submerge villages, towns, forests and fertile land
    • People must be resettled
    • Blocking the river harms river life
Because of these problems, whether hydroelectricity is fully environment friendly is debated.

Energy changes in a wind turbine

  1. Kinetic energy of wind
  2. Kinetic energy of turbine
  3. Electrical energy

Hydro: potential → kinetic (water) → kinetic (turbine) → electrical. Wind: kinetic (wind) → kinetic (turbine) → electrical; the gear box increases the rotation speed.

  • Green energy comes from never-ending sources such as water, wind, sunlight and biofuels.
  • Hydroelectric plants convert the potential energy of stored water into electricity.
  • Dams can displace people, submerge forests and land, and harm river life.
  • Wind turbines use a gear box to raise the rotation speed; they need sites with suitable wind speed.
Read the full lesson

Lesson 5

Solar energy: photovoltaic cells, panels and solar thermal plants

Joining solar cells

  • In series
    • Potential differences add: V = V1 + V2 + ...
    • Current stays that of one cell
    • Used to raise the voltage
  • In parallel
    • Currents add: I = I1 + I2 + ...
    • Potential difference stays that of one cell
    • Used to raise the current

Building blocks of a solar plant

  1. Solar cell The basic unit: about 0.5 V.
  2. Panel (module) Many cells, mostly in series.
  3. String Several panels in series.
  4. Array Several strings in parallel.
Any required voltage and current can be obtained, from a calculator's few milliwatts to a station of many megawatts.

Solar thermal power plant

  1. Concentrators Mirrors collect and focus sunlight.
  2. Absorber Concentrated sunlight becomes heat.
  3. Steam Heat turns water into steam.
  4. Turbine and generator Steam drives them to produce electricity.
Energy: solar → thermal → kinetic (steam) → kinetic (turbine) → electrical.

Series: voltages add, current stays the same. Parallel: currents add, voltage stays the same. Solar PV gives DC; an inverter changes it to AC.

  • A 1 cm² silicon cell gives about 30 mA at about 0.5 V; voltage does not depend on area.
  • Series raises voltage; parallel raises current. Cells form panels, panels form strings, strings form arrays.
  • Solar cells are about 15% efficient, give DC and work only in daylight; batteries and inverters are used.
  • Solar thermal plants focus sunlight to make steam for a turbine.
Read the full lesson

Privacy · Terms · Refunds · Delivery