- Practice
- About 15 min
- 5 practice questions
Green energy: hydroelectric and wind power
Explain what green energy is, describe how hydroelectric and wind power plants work with their energy transformations, and weigh their advantages and limitations.
If something looks wrong, please tell us.
By the end of this lesson you can
- Define green energy and name its sources.
- Explain the working, advantages and problems of a hydroelectric power plant.
- Explain the working and limitations of wind power.
Given the problems of coal, gas and nuclear power, the world is turning to sources that never run out and do not pollute the air. Electricity from these sources is called green energy.
What green energy is
Water reservoirs, wind, sunlight and biofuels are perpetual (never-ending) sources, and generating electricity from them avoids the problems of burning fuels and of nuclear waste. Electricity generated this way is environment friendly, and is called green energy.
Conventional and green sources of electricity
-
Not environment friendly
- Coal, natural gas, nuclear fuel
- Limited reserves
- Pollution, global warming or radioactive waste
-
Green energy
- Water, wind, sunlight, biofuels
- Never-ending (renewable)
- No combustion pollution
Hydroelectric power
Water stored behind a dam has potential energy. In a hydroelectric plant, water is led from the reservoir through a large pipe (penstock) to a water turbine at the bottom of the dam. As it falls, its potential energy becomes kinetic energy; the fast water turns the turbine, which drives the generator in the power house.
Energy changes in a hydroelectric plant
- Potential energy of stored water
- Kinetic energy of flowing water
- Kinetic energy of turbine
- Electrical energy
The intake is usually placed around the middle of the dam's height. An intake very near the top would draw only the top layer of water and would stop working as soon as the level dropped; one at the very bottom would give the greatest drop but would also draw in silt and could empty the reservoir completely. The middle position balances a good drop of height with a dependable supply.
Hydroelectric power: for and against
-
Advantages
- No fuel burnt, so no combustion pollution
- Electricity whenever needed, if water is stored
- Reservoir refills in the rainy season
-
Problems
- Back-water can submerge villages, towns, forests and fertile land
- People must be resettled
- Blocking the river harms river life
Wind power
Wind energy has long been used to lift water and run flour mills. A wind turbine turns the kinetic energy of wind into electricity. Wind strikes the blades and rotates them; the shaft is connected to the generator through a gear box, which increases the number of rotations per unit time, so the generator turns fast enough.
Energy changes in a wind turbine
- Kinetic energy of wind
- Kinetic energy of turbine
- Electrical energy
Wind turbines range from less than 1 kW (for a home) to several megawatts (1 MW = 1,000 kW). The size chosen depends on the wind speed at the site, which depends on geography. Wind is often strong on sea shores, which suit wind turbines. Wind energy is clean, but the necessary wind speed is not available everywhere, so its use is limited.
Worked example 1: potential energy of stored water
1,000 kg of water falls through a height of 50 m. How much potential energy can it give up? (Take g = 10 m/s².) PE = mgh = 1,000 × 10 × 50 = 5,00,000 J (500 kJ). If the turbine and generator together convert 80% of it (an illustrative figure), the electrical energy is 0.8 × 500 = 400 kJ.
Worked example 2: counting turbines
A wind farm must supply 6 MW using turbines of 2,000 kW each, running at full capacity. How many are needed? 6 MW = 6,000 kW; 6,000 ÷ 2,000 = 3 turbines.
Hydro: potential → kinetic (water) → kinetic (turbine) → electrical. Wind: kinetic (wind) → kinetic (turbine) → electrical; the gear box increases the rotation speed.
Key takeaways
- Green energy comes from never-ending sources such as water, wind, sunlight and biofuels.
- Hydroelectric plants convert the potential energy of stored water into electricity.
- Dams can displace people, submerge forests and land, and harm river life.
- Wind turbines use a gear box to raise the rotation speed; they need sites with suitable wind speed.
Check your understanding
-
1. In a hydroelectric power plant, the water stored in the dam has
- potential energy
- chemical energy
- nuclear energy
- light energy
Show answer
Answer: A. Water stored at a height has potential energy, which changes to kinetic energy as it flows down to the turbine.
-
2. What is the function of the gear box in a wind turbine?
- To store electricity
- To increase the number of rotations per unit time
- To change DC into AC
- To slow the wind
Show answer
Answer: B. The gear box connects the slow-turning blades to the generator and increases the rotations per unit time.
-
3. Which of these is a problem associated with hydroelectric projects?
- Release of sulphur oxides
- Radioactive waste
- Soot from combustion
- Submergence of villages, forests and fertile land
Show answer
Answer: D. The back-water of a dam can submerge villages, forests and farmland, forcing people to move. Hydro plants burn no fuel.
-
4. 1,000 kg of water falls 20 m. Taking g = 10 m/s², the potential energy released is
- 20,000 J
- 2,00,000 J
- 2,000 J
- 20,00,000 J
Show answer
Answer: B. PE = mgh = 1,000 × 10 × 20 = 2,00,000 J.
-
5. Why is the use of wind energy limited?
- Wind of the required speed is not available everywhere
- It causes air pollution
- It needs coal to start
- It produces nuclear waste
Show answer
Answer: A. Wind energy is clean, but turbines need suitable wind speeds, which occur only at certain places such as sea shores.
Sign in to keep track of the lessons you finish.