- Practice
- About 15 min
- 5 practice questions
Nuclear power and the environmental cost of conventional electricity
Explain nuclear fission of uranium-235 and the controlled chain reaction, describe a nuclear power plant and its problems, and explain why fossil-fuel and nuclear electricity are not environment friendly.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the fission of uranium-235 and the chain reaction.
- Explain how a nuclear power plant generates electricity and why the chain reaction must be controlled.
- List the environmental problems of electricity from fossil fuels and nuclear fuels.
A tiny mass of uranium can produce as much heat as a huge pile of coal. Nuclear power plants use this heat, but it comes with serious responsibilities. This lesson explains how, and then weighs up all the conventional ways of making electricity.
Nuclear fission
When a neutron strikes a nucleus of uranium-235, the nucleus absorbs it and becomes uranium-236, which is extremely unstable. It splits (fission) into nuclei of barium and krypton, releasing three neutrons and about 200 MeV of energy.
U-235 + neutron → U-236 → Ba-141 + Kr-92 + 3 neutrons + about 200 MeV of energy
Check the mass numbers: 235 + 1 = 236 on the left; 141 + 92 + 3 = 236 on the right. They balance.
Chain reaction
The three neutrons released can split three more U-235 nuclei, which release more neutrons, and so on. This self-sustaining process is the chain reaction. If it runs uncontrolled, the energy is released explosively. In a nuclear power plant the chain reaction is controlled (using control rods that absorb extra neutrons) so that heat is released steadily.
A chain reaction grows quickly
- Generation 1 1 fission → 3 neutrons
- Generation 2 3 fissions → 9 neutrons
- Generation 3 9 fissions → 27 neutrons
- Generation 4 27 fissions → 81 neutrons
Nuclear power plant
A nuclear plant also uses a steam turbine. The difference is that the heat to make steam comes from fission of uranium or plutonium in a nuclear reactor instead of from burning coal. The steam drives the turbine and generator; a condenser and cooling tower return it to water.
Energy changes in a nuclear power plant
- Nuclear energy
- Thermal energy
- Kinetic energy of steam
- Kinetic energy of turbine
- Electrical energy
Nuclear power: for and against
-
Advantages
- Burns no fossil fuel
- No air pollution from combustion
- A good source if enough nuclear fuel is available
-
Problems
- Fission products are radioactive nuclear waste
- Safe disposal of the waste is a major challenge
- An accident can release very harmful radiation
Electricity generation and the environment
Electricity from fossil fuels (coal, natural gas) and nuclear fuels (uranium, plutonium) is not environment friendly:
- Burning fuels emits gases and soot. Incomplete combustion forms carbon monoxide, harmful to health. Rising carbon dioxide in the air contributes to global warming. Nitrogen dioxide from burning coal, diesel and petrol leads to acid rain. Soot causes respiratory problems such as asthma.
- Fossil fuels took millions of years to form and their reserves are limited; at the rate we use them they will run out.
- Nuclear plants create the problems of nuclear waste and possible accidents.
Worked example 1
If each fission released 2 neutrons and each neutron caused one fission, how many fissions would occur in the 5th generation, starting from 1? The number doubles each time: 1, 2, 4, 8, 16. (With 3 neutrons it would be 1, 3, 9, 27, 81, which shows why control is essential.)
Worked example 2
Compare the thermal and nuclear plants. Same: both make steam to drive a steam turbine and generator, and both use a condenser and cooling tower. Different: the source of heat (burning coal versus nuclear fission), the waste (smoke and ash versus radioactive waste) and the fuel (coal versus uranium or plutonium).
Key takeaways
- Fission of U-235 forms barium, krypton, 3 neutrons and about 200 MeV.
- The chain reaction must be controlled in a power plant.
- Nuclear plants avoid air pollution but produce radioactive waste and carry accident risk.
- Fossil and nuclear electricity are not environment friendly: pollution, global warming, acid rain, limited reserves and waste.
Check your understanding
-
1. When U-235 absorbs a neutron it first becomes
- U-238
- barium
- U-236
- plutonium
Show answer
Answer: C. U-235 plus one neutron gives U-236, which is very unstable and splits into barium and krypton.
-
2. How many neutrons are released in the fission of one U-236 nucleus described in the chapter?
- 3
- 1
- 2
- 200
Show answer
Answer: A. The fission produces barium, krypton, three neutrons and about 200 MeV of energy.
-
3. Why must the fission reaction in a nuclear power plant be controlled?
- To increase pollution
- To produce more coal
- To stop the generator
- An uncontrolled chain reaction releases energy explosively
Show answer
Answer: D. Each fission releases neutrons that cause more fissions; uncontrolled, the reaction multiplies rapidly. Control rods keep it steady.
-
4. Which gas from burning fuels is mainly linked to acid rain in the chapter?
- Oxygen
- Nitrogen dioxide
- Carbon dioxide
- Water vapour
Show answer
Answer: B. Nitrogen dioxide from burning coal, diesel and petrol leads to acid rain; carbon dioxide is linked to global warming.
-
5. The biggest environmental challenge specific to nuclear power plants is
- release of soot
- high sulphur emissions
- safe disposal of radioactive waste
- carbon monoxide formation
Show answer
Answer: C. Fission products are radioactive; disposing of nuclear waste safely is a major challenge. Soot and sulphur come from burning coal.
Sign in to keep track of the lessons you finish.