• Practice
  • About 13 min
  • 5 practice questions

Energy, electromagnetic induction and the generator

Explain why electricity is so widely used, state the principle of electromagnetic induction, and describe how an energy source, a turbine and a generator work together in a power station.

If something looks wrong, please tell us.

By the end of this lesson you can

  • List forms of energy and the devices that convert electrical energy into them.
  • State the principle of electromagnetic induction.
  • Explain the energy source → turbine → generator chain used in most power stations.

Along with food, clothing and shelter, energy has become a basic need of modern life. Much of it reaches us as electricity: for lights, fans, pumps, phones and factory machines. This chapter asks how electricity is generated, what each method costs the environment, and what is meant by green energy.

Forms of energy and conversion

We use energy in many forms: mechanical, chemical, sound, light and heat. Energy can be converted from one form to another, and electricity is popular because it is easy to convert into almost any other form.

DeviceElectrical energy converted into
Electric fan, mixer, motor pumpMechanical (kinetic) energy
Bulb, LED lampLight energy
Electric iron, heater, geyserHeat energy
Speaker, bellSound energy
Charging a batteryChemical energy

Electromagnetic induction

Most power stations work on the principle of electromagnetic induction, discovered by Michael Faraday: whenever the magnetic field around a conductor changes, a potential difference is produced across the conductor. The field can be changed in two ways:

  • keep the conductor (coil) still and rotate the magnet, or
  • keep the magnet still and move the conductor.

Either way, a potential difference appears. A machine that produces electricity in this way is an electric generator. In large commercial generators the magnet is rotated inside fixed coils.

The turbine

To rotate the generator's magnet, power stations use a turbine: a wheel with blades on a shaft. When a fast stream of liquid or gas strikes the blades, its kinetic energy turns the turbine. The turbine's shaft is joined to the generator, so the magnet rotates and electricity is produced.

How most power stations generate electricity

  1. Energy source Coal, nuclear fuel, natural gas, water, wind or sunlight.
  2. Turbine Turned by steam, hot gas, water or wind.
  3. Generator A rotating magnet changes the field around coils.
  4. Electrical energy Produced by electromagnetic induction.
Power stations differ mainly in the energy source, and so in the design of the turbine.

Because steam, hot gas, falling water and wind are very different in speed, pressure and density, each type of power station needs a turbine of a different design.

Electromagnetic induction (Faraday): a changing magnetic field around a conductor produces a potential difference across it. Energy source → turbine → generator → electricity.

Worked example 1

A bicycle dynamo lights a lamp only while the wheel turns. Explain. The turning wheel rotates a magnet near a coil inside the dynamo. Only while the magnet rotates does the field around the coil keep changing, so only then is a potential difference induced. When the wheel stops, the field stops changing and the lamp goes out.

Worked example 2

Name the energy conversion at each stage when a wind turbine runs a generator. Kinetic energy of the wind → kinetic energy of the rotating turbine → electrical energy from the generator.

Key takeaways

  • Energy can change form; electricity is convenient because it converts easily into other forms.
  • Electromagnetic induction: a changing magnetic field induces a potential difference.
  • Generators rotate a magnet (or move a conductor) to produce electricity.
  • Turbines are driven by an energy source; their design depends on that source.

Check your understanding

  1. 1. Who discovered the principle of electromagnetic induction?

    1. Isaac Newton
    2. Michael Faraday
    3. Albert Einstein
    4. Thomas Edison
    Show answer

    Answer: B. Michael Faraday discovered that a changing magnetic field around a conductor induces a potential difference across it.

  2. 2. A potential difference is induced across a coil when

    1. the magnetic field around it changes
    2. the coil is heated
    3. the coil is kept still beside a still magnet
    4. the coil is painted
    Show answer

    Answer: A. Induction needs a change in the magnetic field around the conductor, produced by moving either the magnet or the conductor.

  3. 3. In a power station, the turbine is used to

    1. store electricity
    2. change AC into DC
    3. rotate the magnet of the generator
    4. cool the steam
    Show answer

    Answer: C. The turbine's shaft is connected to the generator; as the turbine turns, it rotates the generator's magnet.

  4. 4. An electric iron converts electrical energy mainly into

    1. sound energy
    2. chemical energy
    3. light energy
    4. heat energy
    Show answer

    Answer: D. An iron is a heating device; its element turns electrical energy into heat.

  5. 5. Why do different power stations use turbines of different designs?

    1. The energy sources driving them (steam, gas, water, wind) differ
    2. Generators differ in colour
    3. Turbines are not needed in most stations
    4. Electricity differs in each station
    Show answer

    Answer: A. Steam, hot gas, water and wind differ in speed, pressure and density, so each needs a turbine suited to it.

Sign in to keep track of the lessons you finish.

Next lesson → Thermal and natural gas power plants

Privacy · Terms · Refunds · Delivery