- Practice
- About 18 min
- 5 practice questions
Solar energy: photovoltaic cells, panels and solar thermal plants
Explain how solar photovoltaic cells generate DC electricity, calculate the voltage and current of cells and panels in series and parallel, and describe solar photovoltaic and solar thermal power stations.
If something looks wrong, please tell us.
By the end of this lesson you can
- Explain the photovoltaic effect and the output of a silicon solar cell.
- Calculate the voltage and current of solar cells and panels joined in series and in parallel.
- Describe a solar photovoltaic station (with inverter) and a solar thermal power plant.
Sunlight reaches every village and rooftop. Solar energy can be turned into electricity in two ways: directly, with photovoltaic cells, or indirectly, by first making heat. The first is the only method in this chapter that uses neither a turbine nor electromagnetic induction.
Solar photovoltaic cell
A solar photovoltaic cell converts the energy of sunlight directly into electrical energy; this is the photovoltaic effect. The electricity is DC. Solar cells are made of a semiconductor such as silicon.
A silicon solar cell of area 1 cm² gives a current of about 30 mA and a potential difference of about 0.5 V. The current grows with area, but the potential difference does not depend on the area. So a 100 cm² cell gives about 30 × 100 = 3,000 mA = 3 A, still at 0.5 V.
Cells in series and in parallel
Joining solar cells
-
In series
- Potential differences add: V = V1 + V2 + ...
- Current stays that of one cell
- Used to raise the voltage
-
In parallel
- Currents add: I = I1 + I2 + ...
- Potential difference stays that of one cell
- Used to raise the current
A good solar cell has an efficiency of about 15%: if a panel receives 100 W of solar power, it gives about 15 W of electrical power.
Worked example 1: a solar panel
36 cells of 100 cm² each (0.5 V, 3 A each) are joined in series. Find the panel's output. In series the voltages add: 36 × 0.5 = 18 V. The current stays 3 A. Power = V × I = 18 × 3 = 54 W.
Worked example 2: building an array
Using panels of 18 V and 3 A, how would you obtain 36 V and 12 A? For 36 V, join 36 ÷ 18 = 2 panels in series to make a string (36 V, 3 A). For 12 A, join 12 ÷ 3 = 4 strings in parallel. Total panels = 2 × 4 = 8. Check: 36 V × 12 A = 432 W = 8 × 54 W.
Worked example 3: efficiency
A panel receives 600 W of sunlight. At 15% efficiency, what is its electrical output? 15% of 600 = 0.15 × 600 = 90 W.
From cell to array
Building blocks of a solar plant
- Solar cell The basic unit: about 0.5 V.
- Panel (module) Many cells, mostly in series.
- String Several panels in series.
- Array Several strings in parallel.
Using solar electricity
DC from solar cells can directly run DC devices such as LED lights. Because sunlight is available only by day, energy is stored in batteries for later use. Most household and industrial equipment runs on AC, so an electronic device called an inverter converts DC into AC. In a solar photovoltaic power station, the DC from the array is converted to AC, a transformer adjusts the voltage and current, and the power is fed into the grid. No fuel is burnt, so there is no air pollution, but generation happens only in daytime.
Solar thermal power plant
Many reflectors (concentrators) collect and focus sunlight onto an absorber, where it becomes heat. This heat makes steam, which drives a steam turbine and generator, as in a thermal plant, with a condenser and cooling tower.
Solar thermal power plant
- Concentrators Mirrors collect and focus sunlight.
- Absorber Concentrated sunlight becomes heat.
- Steam Heat turns water into steam.
- Turbine and generator Steam drives them to produce electricity.
Series: voltages add, current stays the same. Parallel: currents add, voltage stays the same. Solar PV gives DC; an inverter changes it to AC.
Key takeaways
- A 1 cm² silicon cell gives about 30 mA at about 0.5 V; voltage does not depend on area.
- Series raises voltage; parallel raises current. Cells form panels, panels form strings, strings form arrays.
- Solar cells are about 15% efficient, give DC and work only in daylight; batteries and inverters are used.
- Solar thermal plants focus sunlight to make steam for a turbine.
Check your understanding
-
1. A silicon solar cell has an area of 50 cm². Using 30 mA per cm², the current it gives is about
- 30 mA
- 0.5 A
- 1.5 A
- 15 A
Show answer
Answer: C. Current = 30 mA/cm² × 50 cm² = 1,500 mA = 1.5 A. Its potential difference stays about 0.5 V.
-
2. Two identical solar cells of 0.5 V and 3 A are joined in parallel. The combination gives
- 1 V and 3 A
- 0.5 V and 6 A
- 1 V and 6 A
- 0.5 V and 3 A
Show answer
Answer: B. In parallel the currents add (3 + 3 = 6 A) while the potential difference stays that of one cell, 0.5 V.
-
3. How many 0.5 V cells must be joined in series to obtain 12 V?
- 24
- 6
- 12
- 36
Show answer
Answer: A. In series the voltages add, so the number of cells = 12 ÷ 0.5 = 24.
-
4. Which device converts the DC from solar panels into AC?
- Transformer
- Generator
- Gear box
- Inverter
Show answer
Answer: D. An inverter is the electronic device that converts DC into AC. A transformer changes the voltage of AC.
-
5. Which method of generating electricity does NOT use electromagnetic induction?
- Solar thermal plant
- Wind turbine
- Solar photovoltaic cell
- Hydroelectric plant
Show answer
Answer: C. Photovoltaic cells convert sunlight directly into electricity without any generator. The others drive a turbine and generator.
Sign in to keep track of the lessons you finish.