- Practice
- About 15 min
- 5 practice questions
Thermal and natural gas power plants
Describe the working and energy transformations of a coal-based thermal power plant and a natural gas power plant, and compare their problems.
If something looks wrong, please tell us.
By the end of this lesson you can
- Describe the boiler, turbine, generator, condenser, cooling tower and stack of a thermal power plant.
- Write the chain of energy transformations in a thermal power plant and a natural gas plant.
- Explain the problems of coal-based power and why natural gas plants pollute less.
A thermal power station is easy to spot from far away: a tall thin chimney and wide, curved cooling towers releasing white vapour. This lesson explains what each part does.
Coal-based thermal power plant
Coal is burnt to heat water in a boiler, producing steam at very high temperature and pressure. The steam drives a steam turbine, which turns the generator. The used steam, now at lower temperature and pressure, is turned back into water in a condenser and pumped back to the boiler.
Working of a thermal power plant
- Coal burns In the boiler furnace; waste gases leave through the tall stack.
- Boiler Water becomes high-pressure, high-temperature steam.
- Steam turbine Steam spins the turbine blades.
- Generator Produces electricity.
- Condenser Steam is cooled back to water and returned to the boiler.
The two kinds of tower
The stack (tall chimney) releases the combustion gases from the boiler high into the atmosphere. The cooling tower cools the water that circulates through the condenser: this water takes heat from the steam, and the heat is released to the atmosphere as vapour and hot air from the cooling tower.
Energy transformations
Energy changes in a thermal power plant
- Chemical energy in coal
- Thermal energy
- Kinetic energy of steam
- Kinetic energy of turbine
- Electrical energy
The energy in coal is called chemical energy because it is stored in the chemical bonds of carbon compounds and released when coal burns (a chemical reaction). Steam is used because water is cheap and plentiful, and high-pressure steam carries a great deal of energy that can be released smoothly on the turbine blades.
Problems of coal-based power
- Burning coal releases carbon dioxide, sulphur oxides and nitrogen oxides, which harm health and the environment.
- Soot particles are released, causing respiratory problems.
- Coal reserves are limited, so coal will not be available for ever.
Natural gas power plant
Here the turbine is run directly by hot gases at very high temperature and pressure produced by burning natural gas. A compressor pushes pressurised air into a combustion chamber, where natural gas burns. The hot, high-pressure gases spin a gas turbine, which drives the generator.
Natural gas power plant
- Compressor Supplies pressurised air.
- Combustion chamber Natural gas burns in the air.
- Gas turbine Driven by the hot, high-pressure gases.
- Generator Produces electrical energy.
A natural gas plant is more efficient than a coal-based plant, and because natural gas contains no sulphur, it causes less pollution. It still releases carbon dioxide, and natural gas, too, is a limited fossil fuel.
Worked example 1
Count the energy conversions in a coal plant and a gas plant. Coal: chemical → thermal → kinetic (steam) → kinetic (turbine) → electrical: 4 conversions. Gas: chemical → kinetic (hot gases) → kinetic (turbine) → electrical: 3 conversions. Fewer conversion steps usually means less energy wasted, which fits the gas plant's higher efficiency.
Worked example 2: efficiency (illustrative)
A plant receives 1,000 MJ of energy from its fuel and delivers 350 MJ of electrical energy (made-up figures). What is its efficiency? Efficiency = output ÷ input × 100 = 350 ÷ 1,000 × 100 = 35%. The rest is lost, mostly as heat released through the cooling tower and stack.
Thermal plant: chemical → thermal → kinetic (steam) → kinetic (turbine) → electrical. Gas plants are more efficient and, with no sulphur in the fuel, pollute less.
Key takeaways
- Boiler, steam turbine, generator, condenser and cooling tower are the main parts of a thermal plant; the stack releases flue gases.
- Coal plants emit CO2, sulphur and nitrogen oxides and soot; coal is limited.
- A gas plant uses a compressor, combustion chamber and gas turbine.
- Gas plants are more efficient and less polluting than coal plants.
Check your understanding
-
1. In a thermal power plant, the condenser
- burns the coal
- turns used steam back into water
- produces electricity
- releases flue gases
Show answer
Answer: B. After driving the turbine, the steam is cooled in the condenser and becomes water again, which is pumped back to the boiler.
-
2. The correct energy chain in a coal-based power plant is
- chemical → thermal → kinetic → electrical
- nuclear → thermal → kinetic → electrical
- potential → kinetic → electrical
- light → electrical
Show answer
Answer: A. Coal's chemical energy becomes heat, the heat makes steam whose kinetic energy turns the turbine, and the generator produces electricity.
-
3. Why does a natural gas plant cause less pollution than a coal plant?
- It does not burn any fuel
- It uses steam
- It has a cooling tower
- Natural gas contains no sulphur
Show answer
Answer: D. Natural gas has no sulphur, so no sulphur oxides are formed, and it burns more cleanly than coal.
-
4. A plant takes in 2,000 MJ of fuel energy and gives 700 MJ of electrical energy. Its efficiency is
- 70%
- 35%
- 28.5%
- 65%
Show answer
Answer: B. Efficiency = 700 ÷ 2,000 × 100 = 35%.
-
5. In a natural gas power plant, pressurised air is supplied by the
- compressor
- condenser
- cooling tower
- boiler
Show answer
Answer: A. A compressor pushes pressurised air into the combustion chamber where the natural gas burns.
Sign in to keep track of the lessons you finish.