- Practice
- About 17 min
- 5 practice questions
Construction I: base, a base angle and the sum of the other two sides
Construct a triangle when its base, one angle on the base and the sum of the remaining two sides are given, and explain why the construction works.
If something looks wrong, please tell us.
By the end of this lesson you can
- Plan Construction I with a rough figure.
- Write and follow the steps of construction in order.
- Explain why the vertex lies on the perpendicular bisector of seg DC.
- Adapt the method when the angle is at the other end of the base or the perimeter is given.
Suppose you know the base BC of a triangle, the angle ∠B at one end, and only the total AB + AC. You cannot draw AB or AC separately. The idea is to lay the total length along the ray at B and then use a perpendicular bisector to split it correctly.
The idea (rough figure)
Draw a rough △ABC with base BC and ∠B at B. Extend BA beyond A to a point D so that BD = AB + AC. Then AD = BD − BA = AC. Since AD = AC, point A is equidistant from D and C, so A lies on the perpendicular bisector of seg DC. A also lies on ray BD. So A is where the perpendicular bisector of DC cuts ray BD.
Worked example 1
Construct △ABC in which BC = 5.8 cm, ∠B = 60° and AB + AC = 9.4 cm.
- Draw a rough figure showing BC = 5.8 cm, ∠B = 60°, and D on ray BA with BD = 9.4 cm.
- Draw seg BC of length 5.8 cm.
- At B draw ray BP making an angle of 60° with seg BC.
- On ray BP mark point D such that BD = 9.4 cm.
- Join D and C to get seg DC.
- Construct the perpendicular bisector of seg DC.
- Name the point where the perpendicular bisector cuts ray BP as A.
- Join A and C. △ABC is the required triangle.
Construction I at a glance
- Base BC Draw the given base.
- Ray at B At the given angle ∠B.
- Mark D BD = AB + AC on the ray.
- Join DC This segment is the key.
- Bisect DC Perpendicular bisector cuts the ray at A.
- Join AC Triangle complete.
Check your figure: measure AB and AC; they should add up to 9.4 cm (for example, close to 5.5 cm and 3.9 cm). Measure ∠B again to be sure it is 60°.
When the angle is at the other end
If the question gives BC, ∠C and AB + AC, do the same thing from C: draw the ray at C, mark D on it with CD = AB + AC, join DB, and construct the perpendicular bisector of DB. It meets the ray at A because AD = AB.
When the perimeter is given
If the perimeter AB + BC + CA and the base BC are given, first subtract: AB + AC = perimeter − BC. Then use Construction I.
Worked example 2
Construct △PQR with QR = 4.5 cm, ∠Q = 50° and perimeter 12 cm. Working: PQ + PR = 12 − 4.5 = 7.5 cm.
- Draw seg QR = 4.5 cm.
- At Q draw ray QX making 50° with seg QR.
- Mark D on ray QX with QD = 7.5 cm.
- Join DR and construct its perpendicular bisector.
- Name the point where it cuts ray QX as P, and join PR. △PQR is the required triangle.
When is the construction possible?
By the triangle inequality, AB + AC must be greater than BC. If the given sum is not greater than the base, no triangle exists and the perpendicular bisector will not meet the ray between B and D.
Construction I: mark BD = AB + AC on the ray at B; A is where the perpendicular bisector of seg DC meets ray BD, because AD = AC.
Key takeaways: lay the sum of the two sides along the ray at the given angle, join the far end to the other end of the base, and bisect that segment perpendicularly. The vertex is where the bisector meets the ray. If ∠C is given, work from C; if the perimeter is given, subtract the base first. The sum must exceed the base.
Check your understanding
-
1. In Construction I, point D is marked on the ray at B so that BD equals
- BC
- AB + AC
- AB − AC
- the perimeter
Show answer
Answer: B. BD is made equal to the given sum AB + AC. Then AD = BD − AB = AC.
-
2. Why does vertex A lie on the perpendicular bisector of seg DC?
- Because AD = AC
- Because AB = BC
- Because ∠B is acute
- Because D is the midpoint of AB
Show answer
Answer: A. BD = AB + AC and BD = BA + AD, so AD = AC. A point equidistant from D and C lies on the perpendicular bisector of seg DC.
-
3. You must construct △XYZ with YZ = 6 cm, ∠Y = 40° and perimeter 15 cm. What length should YD be on the ray at Y?
- 15 cm
- 6 cm
- 21 cm
- 9 cm
Show answer
Answer: D. XY + XZ = perimeter − YZ = 15 − 6 = 9 cm, so mark YD = 9 cm.
-
4. For which given sum AB + AC is a triangle with BC = 7 cm IMPOSSIBLE?
- 7.5 cm
- 10 cm
- 6.5 cm
- 12 cm
Show answer
Answer: C. By the triangle inequality AB + AC must be greater than BC = 7 cm. A sum of 6.5 cm is less than 7 cm, so no triangle exists.
-
5. The given angle is ∠C (not ∠B) together with BC and AB + AC. Which segment should be bisected perpendicularly?
- Seg DB, where D is on the ray at C with CD = AB + AC
- Seg DC, where D is on the ray at B
- Seg BC
- Seg AB
Show answer
Answer: A. Work from C: mark CD = AB + AC on the ray at C. Then AD = AB, so A lies on the perpendicular bisector of seg DB.
Sign in to keep track of the lessons you finish.