• Practice
  • About 16 min
  • 5 practice questions

Construction II (case 1): the side at the given angle is the longer one

Construct a triangle when its base, an angle on the base and the difference of the other two sides are given, in the case where the side next to the given angle is longer.

If something looks wrong, please tell us.

By the end of this lesson you can

  • Recognise from AB − AC > 0 that AB, the side at ∠B, is the longer side.
  • Plan the construction with point D on ray BA between B and A.
  • Follow the steps of construction in order.
  • Explain why the difference must be less than the base.

Now the question gives a difference of two sides instead of their sum. There are two cases, depending on which side is longer. In this lesson the side next to the given angle is the longer one: we know BC, ∠B and AB − AC, with AB > AC.

The idea (rough figure)

In a rough △ABC with AB > AC, mark D on side BA so that BD = AB − AC. Then D lies between B and A, and AD = AB − BD = AB − (AB − AC) = AC. So AD = AC, and A lies on the perpendicular bisector of seg DC. A also lies on the ray at B. Their meeting point is A.

Worked example 1

Construct △ABC in which BC = 6.5 cm, ∠ABC = 45° and AB − AC = 2.2 cm.

  1. Draw a rough figure and mark BC = 6.5 cm, ∠B = 45°, and D on BA with BD = 2.2 cm.
  2. Draw seg BC of length 6.5 cm.
  3. At B draw ray BL making an angle of 45° with seg BC.
  4. On ray BL mark point D such that BD = 2.2 cm.
  5. Join D and C.
  6. Construct the perpendicular bisector of seg DC.
  7. Name the point where it meets ray BL as A.
  8. Join A and C. △ABC is the required triangle.

Construction II, case AB − AC

  1. Base BC Draw it.
  2. Ray BL at ∠B Given angle at B.
  3. Mark D on ray BL BD = AB − AC (short length).
  4. Join DC Then bisect it perpendicularly.
  5. Bisector meets ray at A Because AD = AC.
  6. Join AC Triangle complete.

Check: measure AB and AC in your fair figure. Their difference should be 2.2 cm, and AB should be the longer side.

Worked example 2: the angle at C

Construct △PQR with QR = 7 cm, ∠R = 55° and PR − PQ = 1.8 cm. Here the side next to the given angle (∠R) is PR, and it is the longer one, so this is the same case worked from R.

  1. Draw seg QR = 7 cm.
  2. At R draw ray RT making 55° with seg RQ.
  3. On ray RT mark D such that RD = 1.8 cm.
  4. Join DQ and construct the perpendicular bisector of seg DQ.
  5. Name the point where it meets ray RT as P. Join PQ. △PQR is the required triangle, since PD = PQ.

When is it possible?

By the triangle inequality, the difference of two sides is less than the third side, so the given difference must be less than the base. If AB − AC were 7 cm with BC = 6.5 cm, no triangle could be drawn. Also make sure you read which side is longer: the sign of the difference decides the case.

Case 1: the side at the given angle is longer
GivenLonger sideWhere D goesBisect
BC, ∠B, AB − ACAB (at ∠B)On ray BA, BD = AB − ACSeg DC
BC, ∠C, AC − ABAC (at ∠C)On ray CA, CD = AC − ABSeg DB

Case 1 (side at the given angle is longer): mark the difference on the ray at the given angle itself; the vertex is where the perpendicular bisector of the segment joining D to the other end of the base meets that ray.

Key takeaways: when the longer side is next to the given angle, D lies on that same ray, between the vertex of the angle and A. Because AD equals the shorter side, A is on the perpendicular bisector of seg DC. The difference must be smaller than the base.

Check your understanding

  1. 1. Given BC, ∠B and AB − AC = 3 cm, where is D marked?

    1. On the opposite ray of ray BA, 3 cm from B
    2. On seg BC, 3 cm from B
    3. On ray BA, 3 cm from B
    4. At the midpoint of BC
    Show answer

    Answer: C. Since AB is the longer side and it is at ∠B, D is marked on ray BA itself with BD = AB − AC = 3 cm.

  2. 2. In this construction, which equality puts A on the perpendicular bisector of seg DC?

    1. AD = AC
    2. AB = AC
    3. BD = DC
    4. AB = BC
    Show answer

    Answer: A. BD = AB − AC and BD = AB − AD, so AD = AC. A is equidistant from D and C.

  3. 3. Given BC = 5 cm, ∠B = 60° and AB − AC = 5.4 cm, what happens?

    1. The triangle is equilateral
    2. The triangle is right-angled
    3. The triangle can be drawn normally
    4. No triangle can be drawn, because the difference is not less than the base
    Show answer

    Answer: D. The difference of two sides must be less than the third side. 5.4 cm is more than 5 cm, so no triangle exists.

  4. 4. If AB − AC = 2.6 cm and AC = 4.1 cm in your fair figure, what should AB measure?

    1. 1.5 cm
    2. 6.7 cm
    3. 4.1 cm
    4. 2.6 cm
    Show answer

    Answer: B. AB = AC + 2.6 = 4.1 + 2.6 = 6.7 cm.

  5. 5. Given QR, ∠R and PR − PQ, on which ray is D marked?

    1. Ray RP, the ray at the given angle
    2. The opposite ray of ray QP
    3. Ray QR
    4. Ray QP
    Show answer

    Answer: A. PR is the longer side and it lies at the given ∠R, so D goes on ray RP (the ray at ∠R) with RD = PR − PQ; then the perpendicular bisector of DQ is used.

Privacy · Terms · Refunds · Delivery